Search NASA⌕ Search

Engineering topics

Emerson, Rachel

Publications and source records attributed to Emerson, Rachel.

At least 19 records

Exploring biofiber properties and their influence on biocomposite tensile properties

Biofibers serve as effective reinforcements for neat polylactic acid (PLA) in biocomposites, offering an attractive opportunity to decarbonize the manufacturing sector of the United States by displacing fossil-based reinforcement fibers such as carbon fibers. Also, biofiber production can stimulate economic growth in rural economies, fueling sustainable development. PLA resins are commonly compounded with biofibers to create biocomposites suitable for additive manufacturing. PLA-biofiber composites often exhibit better overall material properties than neat (pure) PLA, but the associations between biofiber properties and the material properties of their biocomposites remain largely unexplored. Hence, this research delves into a comprehensive exploration of diverse biofibers, scrutinizing their physical and chemical attributes, including size, shape, ash content and biochemical composition. The study meticulously analyzes the flow properties of each biofiber and elucidates the ultimate tensile strengths and Young's modulus of corresponding biocomposite samples. Noteworthy correlations between biofiber and biocomposite tensile properties are uncovered, shedding light on critical interrelationships. The study introduces an approach employing regression models to predict the ultimate tensile strength and Young's modulus of biocomposites. These models, validated with a cross-validation technique, exhibit remarkable predictive accuracy, particularly in estimating ultimate tensile strength. © 2024 Oak Ridge National Laboratory managed by UT-Battelle, LLC and The Author(s). Polymer International published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

36 MATERIALS SCIENCE↗

Failure Mode and Effects Analysis Summary Report

This report provides an overview of the development of failure modes and effects analysis (FMEA) and its implementation as a systematic criticality and risk assessment tool supporting a quality by design (QbD) approach for FCIC research. This report also provides a high-level overview of the results for the FMEA evaluation of two feedstock preprocessing system configurations: (1) generation of pine residue materials for high-temperature pyrolysis conversion and (2) generation of corn stover materials for low-temperature conversion using deacetylation and disc mechanical refining pretreatment for fermentation to hydrocarbons. For the results presented in this report, our FMEA interviews included two approaches. The first approach was to perform FMEA interviews for the entire system of unit operations giving a wholistic system level view. The second approach consisted of detailed interviews for each individual unit operation within the system allowing for a “deep dive” into the specific failures for the individual components within the configuration. These two approaches provide different resolutions of information. The FMEA results of this report were focused on failures associated with meeting critical quality attributes (CQAs) identified for the target conversion processes for each processed feedstock type. The information gathered through the FMEA interviews include estimations of risk scores for meeting each given CQA specification, identification of the impacts for not meeting a CQA specification, capturing causes associated with material attributes and process parameters for each failure, identification of current detection methods, and speculation of potential mitigation strategies for decreasing a failure’s risk score. The complete results of all FMEA interviews are provided in the Appendices of this report.

conversion↗

Harvest and nitrogen effects on bioenergy feedstock quality of grass-legume mixtures on Conservation Reserve Program grasslands

Perennial grass mixtures established on Conservation Reserve Program (CRP) lands can be an important source of feedstock for bioenergy production. This study aimed to evaluate management practices for optimizing the quality of bioenergy feedstock and stand persistence of grass-legume mixtures under diverse environments. A 5-year field study (2008–2012) was conducted to assess the effects of two harvest timings (at anthesis vs after complete senescence) and three nitrogen (N) rates (0, 56, 112 kg N ha -1 ) on biomass chemical compositions (i.e., cell wall components, ash, volatiles, total carbon, and N contents) and the feedstock energy potential, examined by the theoretical ethanol yield (TEY) and the total TEY (i.e., the product of biomass yield and TEY, L ha -1 ), of cool-season mixtures in Georgia and Missouri and a warm-season mixture in Kansas. The canonical correlation analysis (CCA) was used to investigate the effect of vegetative species transitions on feedstock quality. Although environmental variations (mainly precipitation) greatly influenced the management effect on chemical compositions, the delayed harvest after senescence generally improved feedstock quality. In particular, the overall cell wall concentrations and TEY of the warm-season mixtures increased by approximately 7%. Additional N supplies improved the total TEY of both mixtures by ~1.6–4.2 L ha -1 per 1.0 kg N ha -1 input but likely lowered the feedstock quality, particularly for the cool-season mixture. The cell wall concentrations of cool-season mixture reduced by approximately 3%–6%. The CCA results indicated that the increased legume compositions (under low N input) likely enhanced lignin but reduced ash concentrations. This field research demonstrated that with proper management, grass-legume mixtures on CRP lands can provide high-quality feedstock for bioenergy productions.

09 BIOMASS FUELS↗

MSW Variability Mapping and Conversion to Biofuel

MSW (Municipal Solid Waste) is a form of biomass which consists of categorized components of waste/trash. The general categories are paper, yard trash, construction & debris, appliances, tires, glass, metals, aluminum & steel cans, plastics, organics, inorganics, and HHW (Household Hazardous Waste). This project focuses on the factors within a region or population that contribute to variability in the composition of MSW and in turn MSW’s convertibility to biofuel. A list of contributors was determined (Social Vulnerability Index, Access to Public Transportation, Racial Distribution, GDP, Personal Income) and then JMP was used to perform a Multivariate analysis to determine correlations and a Partial Least-Squares regression to determine Variable Importance Plots for each MSW category. In addition to data analysis, the convertibility of MSW to biofuel was studied via microwave pyrolysis system in order to separate and characterize the various gaseous and bio-oil products.

09 BIOMASS FUELS↗

Key environmental and production factors for understanding variation in switchgrass chemical attributes

Abstract Switchgrass ( Panicum virgatum L.) is a promising feedstock for bioenergy and bioproducts; however, its inherent variability in chemical attributes creates challenges for uniform conversion efficiencies and product quality. It is necessary to understand the range of variation and factors (i.e., field management, environmental) influencing chemical attributes for process improvement and risk assessment. The objectives of this study were to (1) examine the impact of nitrogen fertilizer application rate, year, and location on switchgrass chemical attributes, (2) examine the relationships among chemical attributes, weather and soil data, and (3) develop models to predict chemical attributes using environmental factors. Switchgrass samples from a field study spanning four locations including upland cultivars, one location including a lowland cultivar, and between three and six harvest years were assessed for glucan, xylan, lignin, volatiles, carbon, nitrogen, and ash concentrations. Using variance estimation, location/cultivar, nitrogen application rate, and year explained 65%–96% of the variation for switchgrass chemical attributes. Location/cultivar × year interaction was a significant factor for all chemical attributes indicating environmental‐based influences. Nitrogen rate was less influential. Production variables and environmental conditions occurring during the switchgrass field trials were used to successfully predict chemical attributes using linear regression models. Upland switchgrass results highlight the complexity in plant responses to growing conditions because all production and environmental variables had strong relationships with one or more chemical attributes. Lowland switchgrass was limited to observations of year‐to‐year environmental variability and nitrogen application rate. All explanatory variable categories were important for lowland switchgrass models but stand age and precipitation relationships were particularly strong. The relationships found in this study can be used to understand spatial and temporal variation in switchgrass chemical attributes. The ability to predict chemical attributes critical for conversion processes in a geospatial/temporal manner would provide state‐of‐the‐art knowledge for risk assessment in the bioenergy and bioproducts industry.

09 BIOMASS FUELS↗

Impacts of Biopolymer Structural and Chemical Attributes on the Products Distributions of Pyrolyzed Loblolly Pine

This presentation evaluates the impact that biopolymer structural and chemical attributes of pyrolyzed loblolly pine has on product distributions, with a focus on how how the anatomical fractions lead to chemical variability, and then how this variability impacts conversion. As an example, bark and needles represent extreme compositional fractions, and these result in differences in pyrolysis yield.

biomass↗

Improved Advanced Biomass Logistics Utilizing Woody and other Feedstocks in the Northeast and Pacific Northwest (Final Report)

Willow and poplar short rotation woody crops (SRWC) have shown promise with regards to environmental benefits and rural development but wide adoption lags due to underdeveloped markets and supply systems. High costs associated with harvesting, handling and transportation (40-60% of delivered cost) have impeded expansion. A better understanding of these systems will create opportunities to improve efficiency, reduce costs, and realize environmental benefits and impacts. The project’s goal was to lower the delivered cost of hybrid poplar in the Northwest and willow in the Northeast by optimizing harvesting and logistics supply systems while maintaining or improving biomass quality along the supply chain. Over 3,400 Mg of biomass and 300 ha of willow and poplar were monitored over a range of crop and field conditions. Feedstock quality as affected by storage and preprocessing were shown to improve or maintain feedstock quality. Modeled harvesting costs ranged from $38–61 Mg -1 dry; when including delivery and preprocessing feedstock costs ranged between $79-83 Mg -1 dry for willow and $106-116 Mg -1 dry for poplar. Costs for willow minimized when hot water extraction and high-moisture densification preprocessing were used. Models also suggest that social and regional factors could further reduce costs. Results will give guidance to feedstock growers, harvesting and logistic operations, biorefinery project developers, and policy makers developing SRWC to support a growing bioeconomy.

, biomass↗

Pilot plant reliability metrics for grinding and fast pyrolysis of woody residues

Here we report on the effects of loblolly pine residue variability on material throughput, pilot plant uptime, operator intervention, product yield, and product quality for grinding, fast pyrolysis, and hydrotreating operations. Preprocessing throughput using a hammer mill varied between 31-48% of nameplate capacity (5 tons/hr). Grinder overloads in the size reduction step were more prevalent for lower ash and higher moisture materials. Fast pyrolysis throughput varied between 57-72% of nameplate capacity (20 kg/hr) and bio-oil yields varied between 46-53% (feedstock carbon to oil, dry basis). During fast pyrolysis operations, downtime was caused by bridging in the feed and char removal systems and plugging in the condensation system. Cohesion of feedstock and char leading to system plugging was less frequent for higher ash feedstocks, and differences in condenser plugging behavior between high and low ash feedstocks were observed. The catalyst stability of the bio-oil stabilization step was strongly dependent on the sulfur content in the bio-oil, which was higher for the high-ash residue oils. Lower moisture content in the starting biomass was consistent with lower sulfur content in bio-oil. Yields and properties of hydrotreated fuel products showed minimal deference among the bio-oils.

Klinger, Jordan↗

Assessment of municipal solid waste for valorization into biofuels

Abstract Almost 36 million tons of paper and yard trimmings are not currently being recycled or composted annually and likely end up in landfills. One approach to valorize these resources would be for biofuels production. Nonrecyclable municipal solid waste (MSW) paper and yard trimmings were assessed for their suitability as feedstocks to produce biofuels from sugars. Both materials met the cost target of less than $85.51/ton ($2016) with MSW paper ranging from $36.40 to $62.18/dry ton and grass clippings from $25.64 to $45.86/dry ton. MSW paper exceeded the carbohydrate requirement of 59% while grass clippings had significantly lower amounts of carbohydrates (30%). However, both types of MSW had ash contents significantly above the required 5% total ash with paper at 22% ash and grass clippings at 16%. While neither waste material was individually found to be suitable for biofuels production based on compositional requirements, it was determined that blending either waste with corn stover would produce materials that met carbohydrate, ash, and cost targets. The higher carbohydrate and lower ash stover compensated for the lower carbohydrates and high ash of the waste materials, while the lower cost waste materials offset the higher cost of corn stover.

09 BIOMASS FUELS↗

Chemical Characterization and Conversion Assessment of BurCell® System Treated MSW Materials

Cornerstone Resources has developed a proprietary advanced preprocessing technology, the BurCell® System, for production of a high quality organic biomass feedstock from numerous waste resources. While suitable for a variety of feedstock, the focus of development for the BurCell® System has been thus far Municipal Solid Waste (MSW). In MSW, the system technology is able to capture non-recyclable waste paper, cardboard, and organic materials, homogenize these materials and allow for separation of the non-organic fraction. The resulting homogenized organic material typically represents in excess of 50% of the raw MSW feed. The recently released Billion Ton Study now includes MSW as a feedstock resource showing it to be one of the lowest cost and most widely distributed biomass resources available; however, acknowledging the concerns with the potential physical and chemical variability of an MSW based feedstock stream. The focus on MSW has also been driven by MSW being a resource with a clear, well understood and mature supply-chain. Treating MSW in the BurCell® System will make that source of biomass substantially more accessible. To further promote the use of this MSW derived biomass and beneficially exploit the use of the BurCell® System for processing of biomass for Bioenergy production facilities, more detailed lab data is now required

09 BIOMASS FUELS↗

Catalytic hydroprocessing of fast pyrolysis oils: Impact of biomass feedstock on process efficiency

Here, we report here on an experimental study to produce refinery-ready fuel blendstocks via catalytic hydrodeoxygenation (upgrading) of pyrolysis oil using several biomass feedstocks and various blends. Blends were tested along with the pure materials to determine the effect of blending on product yields and qualities. Within experimental error, oil yields from fast pyrolysis and upgrading are shown to be linear functions of the blend components. Switchgrass exhibited lower fast pyrolysis and upgrading yields than the woody samples, which included clean pine, oriented strand board (OSB), and a mix of pinon and juniper (PJ). The notable exception was PJ, for which the poor upgrading yield of 18% was likely associated with the very high viscosity of the PJ fast pyrolysis oil (947 cp). The highest fast pyrolysis yield (54% dry basis) was obtained from clean pine, while the highest upgrading yield (50%) was obtained from a blend of 80% clean pine and 20% OSB (CP 8 OSB 2 ). For switchgrass, reducing the fast pyrolysis temperature to 450 degrees C resulted in a significant increase to the pyrolysis oil yield and reduced hydrogen consumption during hydrotreating, but did not directly affect the hydrotreating oil yield. The water content of fast pyrolysis oils was also observed to increase linearly with the summed content of potassium and sodium, ranging from 21% for clean pine to 37% for switchgrass. Multiple linear regression models demonstrate that fast pyrolysis is strongly dependent upon the contents lignin and volatile matter as well as the sum of potassium and sodium.

09 BIOMASS FUELS↗

Characterized Variability of Biomass Feedstocks using The Idaho National Lab Bioenergy Feedstock Library

In order to achieve the Bioenergy Technology Office Goals of acquiring a billion tons of feedstock material that meets the physical, chemical, and cost requirements for conversion to fuel by 2030, research into understanding the overall causes of compositional, physical and conversion variability for the wide number of available biomass feedstock resources is necessary. One strategy for accomplishing this is the innovative knowledge-based management system currently being developed and maintained at Idaho National Laboratory (INL) known as the Bioenergy Feedstock Library (www.bioenergylibrary.inl.gov). The library currently has harvest, storage and logistic, analytical characterization, and/or conversion data for over 35,000 samples spanning 90 different feedstock types, 38 states, and 3 countries. These samples and data have been provided not only by the INL but from over 100 collaborating universities, feedstock supplier, national labs, and industrial partners. Of the 35,000 samples, 2300 have been characterized by one or more analytical processes including the compositional, proximate, ultimate, elemental ash, physical and conversion analyses. This presentation will demonstrate the significant research into the national understanding of biomass feedstock variability made possible by the continually updated contributions to the library that have historically only been available in the few published review papers regarding feedstock variability. Also, the benefits of contributing to this database, the analytical tools available, and the future prospects that this tool can provide research supporting sustainable and renewable energy will be presented.

09 BIOMASS FUELS↗

Predicting properties of gas and solid streams by intrinsic kinetics of fast pyrolysis of wood

Pyrolysis has the potential to create a biocrude oil from biomass sources that can be used as fuel or as feedstock for subsequent upgrading to hydrocarbon fuels or other chemicals. The product distribution/composition, however, is linked to the biomass source. This work investigates the products formed from pyrolysis of woody biomass with a previously developed chemical kinetics model. Different woody feedstocks reported in prior literature are placed on a common basis (moisture, ash, fixed carbon free) and normalized by initial elemental composition through ultimate analysis. Observed product distributions over the full devolatilization range are explored, reconstructed by the model, and verified with independent experimental data collected with a microwave-assisted pyrolysis system. These trends include production of permanent gas (CO, CO 2 ), char, and condensable (oil, water) species. Elementary compositions of these streams are also investigated. As a result, close agreement between literature data, model predictions, and independent experimental data indicate that the proposed model/method is able to predict the ideal distribution from fast pyrolysis given reaction temperature, residence time, and feedstock composition.

09 BIOMASS FUELS↗

Vertical distribution of structural components in corn stover

In the United States, corn ( Zea mays L.) stover has been targeted for second generation fuel production and other bio-products. Our objective was to characterize sugar and structural composition as a function of vertical distribution of corn stover (leaves and stalk) that was sampled at physiological maturity and about three weeks later from multiple USA locations. A small subset of samples was assessed for thermochemical composition. Concentrations of lignin, glucan, and xylan were about 10% greater at grain harvest than at physiological maturity, but harvestable biomass was about 25% less due to stalk breakage. Gross heating density above the ear averaged 16.3 ± 0.40 MJ kg⁻¹, but with an alkalinity measure of 0.83 g MJ⁻¹, slagging is likely to occur during gasification. Assuming a stover harvest height of 10 cm, the estimated ethanol yield would be >2500 L ha⁻¹, but it would be only 1000 L ha⁻¹ if stover harvest was restricted to the material from above the primary ear. Vertical composition of corn stover is relatively uniform; thus, decision on cutting height may be driven by agronomic, economic and environmental considerations.

09 BIOMASS FUELS↗

Drought effects on composition and yield for corn stover, mixed grasses, and Miscanthus as bioenergy feedstocks

Drought conditions in 2012 were some of the most severe reported in the United States. It is necessary to explore the effects of drought on the quality attributes of current and potential bioenergy feedstocks. Compositional analysis data for corn stover, Miscanthus, and CRP grasses from one or more locations for years 2010 (normal precipitation levels) and 2012 (a known severe drought year nationally) was collected. Results & discussion: The general trend for samples that experienced drought was an increase in extractives and a decrease in structural sugars and lignin. The TEY yields were calculated to determine the drought effects on ethanol production. All three feedstocks had a decrease of 12-14% in TEY when only decreases of carbohydrate content was analyzed. When looking at the compounded effect of both carbohydrate content and the decreases in dry matter loss for each feedstock there was a TEY decrease of 25%-59%. Conclusion: Drought had a significant impact on the quality of all three bioenergy crops. In all cases where drought was experienced both the quality of the feedstock and the yield decreased. These drought induced effects could have significant economic impacts on biorefineries.

09 BIOMASS FUELS↗