Search NASA⌕ Search

Engineering topics

Enriquez, Erik

Publications and source records attributed to Enriquez, Erik.

11 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Reducing leakage current and enhancing polarization in multiferroic 3D super-nanocomposites by microstructure engineering

Abstract Multiferroic materials have generated great interest due to their potential as functional device materials. Nanocomposites have been increasingly used to design and generate new functionalities by pairing dissimilar ferroic materials, though the combination often introduces new complexity and challenges unforeseeable in single-phase counterparts. The recently developed approaches to fabricate 3D super-nanocomposites (3D‐sNC) open new avenues to control and enhance functional properties. In this work, we develop a new 3D‐sNC with CoFe 2 O 4 (CFO) short nanopillar arrays embedded in BaTiO 3 (BTO) film matrix via microstructure engineering by alternatively depositing BTO:CFO vertically-aligned nanocomposite layers and single-phase BTO layers. This microstructure engineering method allows encapsulating the relative conducting CFO phase by the insulating BTO phase, which suppress the leakage current and enhance the polarization. Our results demonstrate that microstructure engineering in 3D‐sNC offers a new bottom–up method of fabricating advanced nanostructures with a wide range of possible configurations for applications where the functional properties need to be systematically modified.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Induced ferroelectric phases in SrTiO 3 by a nanocomposite approach

Inducing new phases in thick films via vertical lattice strain is one of the critical advantages of vertically aligned nanocomposites (VANs). In SrTiO 3 (STO), the ground state is ferroelastic, and the ferroelectricity in STO is suppressed by the orthorhombic transition. In this study, we explore whether vertical lattice strain in three-dimensional VANs can be used to induce new ferroelectric phases in SrTiO 3 :MgO (STO:MgO) VAN thin films. The STO:MgO system incorporates ordered, vertically aligned MgO nanopillars into a STO film matrix. Strong lattice coupling between STO and MgO imposes a large lattice strain in the STO film. We have investigated ferroelectricity in the STO phase, existing up to room temperature, using piezoresponse force microscopy, phase field simulation and second harmonic generation. We also serendipitously discovered the formation of metastable TiO nanocores in MgO nanopillars embedded in the STO film matrix. Our results emphasize the design of new phases via vertical epitaxial strain in VAN thin films.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Structural and Optical Properties of Phase-Pure UO 2 , α-U 3 O 8 , and α-UO 3 Epitaxial Thin Films Grown by Pulsed Laser Deposition

Fundamental understanding of the electronic, chemical, and structural properties of uranium oxides requires the synthesis of high-crystalline-quality epitaxial films of different polymorphs of one material or different phases with various oxygen valence states. Here we report the growth of single-phase epitaxial UO 2 , α-U 3 O 8 , and α-UO 3 thin films using pulsed laser deposition. Both oxygen partial pressure and substrate temperature play critical roles in determining the crystal structure of the uranium oxide films. X-ray diffraction and Raman spectroscopy demonstrate that the films are single phase with excellent crystallinity and epitaxially grown on a variety of substrates. Chemical valance states and optical properties of epitaxial uranium oxide films are studied by X-ray photoelectron spectroscopy and UV–vis spectroscopy, which further confirm the high-quality stoichiometric phase-pure uranium oxide thin films. Epitaxial UO2 films show a direct band gap of 2.61 eV, while epitaxial α-UO 2 , α-U 3 O 8 and α-UO 3 films exhibit indirect band gaps of 1.89 and 2.26 eV, respectively. The ability to grow high-quality epitaxy actinide oxide thin films and to access their different phases and polymorphous will have significant benefits to the future applications in nuclear science and technology.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Strain Enhanced Functionality in a Bottom-Up Approach Enabled 3D Super-Nanocomposites

The ability to control nanoparticle size, concentration, and distribution in epitaxial nanocomposite films has been a formidable challenge in the synthesis of nanostructured composite materials. In this paper, a novel 3D super-nanocomposite (3D-sNC) architecture is successfully demonstrated by integrating superlattice and vertically aligned nanocomposite structures. In the 3D-sNC architecture, the feature size and distribution of the nanocylinders such as the height/lateral dimension and the vertical/lateral spacing of nanocylinders can be precisely controlled. The microstructure parameters such as nanocylinder height and spacing modulated interfacial area control the lattice strain, which further tunes the magnetotransport property. These results demonstrate that 3D-sNC is a simple and yet effective architecture to achieve controlled functionalities via the precise control of nanocylinder size, spacing, concentration, and distribution. Lastly, such a 3D-sNC structure can be used to design advanced nanostructures with desired physical properties for a variety of material systems.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Metal Oxide Nanocomposites: A Perspective from Strain, Defect, and Interface

Vertically aligned nanocomposite thin films with ordered two phases, grown epitaxially on substrates, have attracted tremendous interest in the past decade. These unique nanostructured composite thin films with large vertical interfacial area, controllable vertical lattice strain, and defects provide an intriguing playground, allowing for the manipulation of a variety of functional properties of the materials via the interplay among strain, defect, and interface. This field has evolved from basic growth and characterization to functionality tuning as well as potential applications in energy conversion and information technology. Lastly, the remarkable progress achieved in vertically aligned nanocomposite thin films from a perspective of tuning functionalities through control of strain, defect, and interface is summarized.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Role of temperature and oxygen content on structural and electrical properties of LaBaCo 2 O 5+δ thin films

Here, the role of temperature and the oxygen content in the structural transformation and electrical conductivity of epitaxial double perovskite LaBaCo 2 O 5+δ (0≤ δ ≤ 1) thin films was systematically investigated. Reciprocal space mapping and ω-2θ x-ray diffraction performed at different temperatures in vacuum indicate that oxygen vacancies in the films become ordered at high temperature in a reducing environment. The changes of the oxygen content and the degree of oxygen vacancy ordering in the films result in a strong in-plane anisotropic lattice deformation and a large thermal expansion coefficient along the c-axis direction. The electrical conductivity measurements reveal that these behaviors are related to the degree of oxygen vacancy formation and lattice deformation in the films.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Roles of reaction kinetics of CO 2 on a PrBaCo 2 O 5.5+δ surfaces

A symmetric PBCO/YSZ/PBCO cell (where PBCO refers to PrBaCo 2 O 5.5+δ , and YSZ to yttria stabilized zirconia) was designed and fabricated for the investigation of the catalytic nature and reaction kinetics of CO 2 on PBCO surfaces. The electrochemical impedance spectroscopy was employed to probe the CO 2 reaction behavior on the PBCO electrode. The symmetric equivalent circuit cell characterization reveals that the surface resistance of CO 2 on PBCO is only 30.2 Ω cm 2 and the maximum surface exchange coefficient k chem is 2.0 × 10 -4 cm s -1 at 1147 K, suggesting that PBCO can be an excellent candidate for CO 2 reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Hidden Interface Driven Exchange Coupling in Oxide Heterostructures

A variety of emergent phenomena have been enabled by interface engineering in complex oxides. The existence of an intrinsic interfacial layer has often been found at oxide heterointerfaces. However, the role of such an interlayerin controlling functionalities is not fully explored. Here, we report the control of the exchange bias (EB) in single-phase manganite thin films with nominallyuniform chemical composition across the interfaces. The sign of EB depends on the magnitude of the cooling field. A pinned layer, confirmed by polarized neutron reflectometry, provides the source of unidirectional anisotropy. The origin of the exchange bias coupling is discussed in terms of magnetic interactions between the interfacial ferromagnetically reduced layer and the bulk ferromagnetic region. The sign of EB is related to the frustration of antiferromagnetic coupling between the ferromagnetic region and the pinned layer. Our results shed new light on using oxide interfaces to design functional spintronic devices.

epitaxial thin films↗
DOE OSTI2017

Oxygen Vacancy-Tuned Physical Properties in Perovskite Thin Films with Multiple B-site Valance States

Controlling oxygen content in perovskite oxides with ABO 3 structure is one of most critical steps for tuning their functionality. Notably, there have been tremendous efforts to understand the effect of changes in oxygen content on the properties of perovskite thin films that are not composed of cations with multiple valance states. Here, we study the effect of oxygen vacancies on structural and electrical properties in epitaxial thin films of SrFeO 3-δ (SFO), where SFO is a compound with multiple valance states at the B site. Various annealing treatments are used to produce different oxygen contents in the films, which has resulted in significant structural changes in the fully strained SFO films. The out-of-plane lattice parameter and tetragonality increase with decreasing oxygen concentration, indicating the crystal structure is closely related to the oxygen content. Importantly, variation of the oxygen content in the films significantly affects the dielectric properties, leakage conduction mechanisms, and the resistive hysteresis of the materials. These results establish the relationship between oxygen content and structural and functional properties for a range of multivalent transition metal oxides.

36 MATERIALS SCIENCE↗