Search NASA⌕ Search

Engineering topics

Ephrath, A. R.

Publications and source records attributed to Ephrath, A. R..

13 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Visual scanning behavior and pilot workload

Sophisticated man machine interaction often requires the human operator to perform a stereotyped scan of various instruments in order to monitor and/or control a system. For situations in which this type of stereotyped behavior exists, such as certain phases of instrument flight, scan pattern was shown to be altered by the imposition of simultaneous verbal tasks. A study designed to examine the relationship between pilot visual scan of instruments and mental workload is described. It was found that a verbal loading task of varying difficulty causes pilots to stare at the primary instrument as the difficulty increases and to shed looks at instruments of less importance. The verbal loading task also affected the rank ordering of scanning sequences. By examining the behavior of pilots with widely varying skill levels, it was suggested that these effects occur most strongly at lower skill levels and are less apparent at high skill levels. A graphical interpretation of the hypothetical relationship between skill, workload, and performance is introduced and modelling results are presented to support this interpretation.

Tole, J. R.↗
NASA NTRS1982

Visual scanning behavior and pilot workload

This paper describes an experimental paradigm and a set of results which demonstrate a relationship between the level of performance on a skilled man-machine control task, the skill of the operator, the level of mental difficulty induced by an additional task imposed on the basic control task, and visual scanning performance. During a constant, simulated piloting task, visual scanning of instruments was found to vary with the difficulty of a verbal mental loading task. The average dwell time of each fixation on the pilot's primary instrument increased with the estimated skill level of the pilots, with novices being affected by the loading task much more than experts. The results suggest that visual scanning of instruments in a controlled task may be an indicator of both workload and skill.

Harris, R. L., Sr.↗
NASA NTRS1982

Visual scanning behavior and mental workload in aircraft pilots

This paper describes an experimental paradigm and a set of preliminary results which demonstrate a relationship between the level of performance on a skilled man-machine control task, the skill of the operator, the level of mental difficulty induced by an additional task imposed on the basic control task, and visual scanning performance. During a constant, simulated piloting task, visual scanning of instruments was found to vary as a function of the level of difficulty of a verbal loading task. The average dwell time of each fixation on the pilot's primary instrument increased as a function of the loading. The scanning behavior was also a function of the estimated skill level of the pilots, with novices being affected by the loading task much more than experts. The results suggest that visual scanning of instruments in a controlled task may be an indicator of both workload and skill.

Tole, J. R.↗
NASA NTRS1982

Entropy, instrument scan and pilot workload

Correlation and information theory which analyze the relationships between mental loading and visual scanpath of aircraft pilots are described. The relationship between skill, performance, mental workload, and visual scanning behavior are investigated. The experimental method required pilots to maintain a general aviation flight simulator on a straight and level, constant sensitivity, Instrument Landing System (ILS) course with a low level of turbulence. An additional periodic verbal task whose difficulty increased with frequency was used to increment the subject's mental workload. The subject's looppoint on the instrument panel during each ten minute run was computed via a TV oculometer and stored. Several pilots ranging in skill from novices to test pilots took part in the experiment. Analysis of the periodicity of the subject's instrument scan was accomplished by means of correlation techniques. For skilled pilots, the autocorrelation of instrument/dwell times sequences showed the same periodicity as the verbal task. The ability to multiplex simultaneous tasks increases with skill. Thus autocorrelation provides a way of evaluating the operator's skill level.

Tole, J. R.↗
NASA NTRS1982

How a new instrument affects pilot's mental workload

Display evaluation has generally been performed using reaction time experiments or subjective evaluations to determine which display is better suited for a particular application. A new testing procedure combined with two analysis techniques of scanning behavior have been used to evaluate two alternative display designs in a realistic setting. Tests were conducted in the Langley Research Center's General Aviation Simulator. The results indicated that a new bargraph type of vertical speed indicator located between the attitude indicator and the altimeter is looked at more quickly, appears to lower cognitive workload slightly, and was preferred over a conventional vertical speed indicator.

Harris, R. L., Sr.↗
NASA NTRS1981

Visual scanning behavior and pilot workload

An experimental paradigm and a set of results which demonstrate a relationship between the level of performance on a skilled man-machine control task, the skill of the operator, the level of mental difficulty induced by an additional task imposed on the basic control task, and visual scanning performance. During a constant, simulated piloting task, visual scanning of instruments was found to vary as a function of the level of difficulty of a verbal mental loading task. The average dwell time of each fixation on the pilot's primary instrument increased as a function of the estimated skill level of the pilots, with novices being affected by the loading task much more than the experts. The results suggest that visual scanning of instruments in a controlled task may be an indicator of both workload and skill.

Harris, R. L., Sr.↗
NASA NTRS1980

Instrument scan - Is it an indicator of the pilot's workload

Results of an investigation of the relationship between an aircraft pilot's visual scanning of instruments and the level of mental activity during a simulated approach and landing are presented. Noting that periods of activity which demand either close to 100% of human capacity or low levels of capacity are the times when most errors are committed, trials were conducted with three NASA test pilots in a terminal configured vehicle simulator. The pilots flew a normal approach while verbally responding to three digit stimuli to be judged plus or minus according to an order of magnitude scheme, and also while using a control stick to extinguish a light that came on and off to the right and left of the instrument panel. Eyescans of the instrumentation were monitored, and determinations were made of the most common instruments used during approach and flare. Fixation on instruments was found to increase with the arithmetic tasks.

Ephrath, A. R.↗
NASA NTRS1978

Effects of uncertainty on manual tracking performance

Transient phenomena and target acquisition modes associated with interrupted observations during ground-to-air AA tracking were investigated. Using a two-axes control stick, the subjects tracked a computer-generated airplane image on a CRT display. The airplane image excuted a low-level straight pass. At certain pseudo-random times during each 25-second run, the screen was blanked for a period of one second. When the target image reappeared, the subjects reacquired it and continued tracking, attempting to minimize vector RMS error for the entire run (including the blanked period). The results reveal an increase both in tracking error and in error variance during the blanked period, only when the target disappears while in the crossover region. Blanking at other times effected increased variance but had no effect on the mean error. A blanking period just before crossover produced an increase lag while a blanking just after crossover resulted in a lead and thus made the error curve more symmetric.

Ephrath, A. R.↗
NASA NTRS1977

Detection by pilots of system failures during instrument landings

The effects of gust disturbances and the pilot's participation mode in the control task on his work-load level and failure detection performance during a simulated low visibility landing approach are examined. We found that the participation mode had a strong effect on the pilot's work load, the induced work load being lowest when the pilot acted as a monitoring element during a coupled approach and highest when the pilot was an active element in the control loop. The effects of differential work load and participation mode on failure detection were separated. The participation mode was shown to have a dominant effect on the failure detection performance, with a failure in a monitored (coupled) axis being detected significantly faster than a comparable failure in a manually controlled axis.

Ephrath, A. R.↗
NASA NTRS1975

Pilot performance in zero-visibility precision approach

The pilot's short-term decisions regarding performance assessment and failure monitoring is examined. The performance of airline pilots who flew simulated zero-visibility landing approaches is reported. Results indicate that the pilot's mode of participation in the control task has a strong effect on his workload, the induced workload being lowest when the pilot acts as a monitor during a coupled approach and highest when the pilot is an active element in the control loop. A marked increase in workload at altitudes below 500 ft. is documented at all participation modes; this increase is inversely related to distance-to-go. The participation mode is shown to have a dominant effect on failure-detection performance, with a failure in a monitored (coupled) axis being detected faster than a comparable failure in a manually-controlled axis. Touchdown performance is also documented. It is concluded that the conventional instrument panel and its associated displays are inadequate for zero-visibility operations in the final phases of the landing approach.

Ephrath, A. R.↗
NASA NTRS1975

Detection of system failures in multi-axes tasks

The effects of the pilot's participation mode in the control task on his workload level and failure detection performance were examined considering a low visibility landing approach. It is found that the participation mode had a strong effect on the pilot's workload, the induced workload being lowest when the pilot acted as a monitoring element during a coupled approach and highest when the pilot was an active element in the control loop. The effects of workload and participation mode on failure detection were separated. The participation mode was shown to have a dominant effect on the failure detection performance, with a failure in a monitored (coupled) axis being detected significantly faster than a comparable failure in a manually controlled axis.

Ephrath, A. R.↗
NASA NTRS1971

University role in astronaut life support systems: Portable thermal control systems

One of the most vital life support systems is that used to provide the astronaut with an adequate thermal environment. State-of-the-art techniques are reviewed for collecting and rejecting excess heat loads from the suited astronaut. Emphasis is placed on problem areas which exist and which may be suitable topics for university research. Areas covered include thermal control requirements and restrictions, methods of heat absorption and rejection or storage, and comparison between existing methods and possible future techniques.

Ephrath, A. R.↗