Search NASA⌕ Search

Engineering topics

Eremeev, Grigory

Publications and source records attributed to Eremeev, Grigory.

At least 37 records · Page 2

Toward Qualifications of HB and LB 650 MHz Cavities for the Prototype Cryomodules for the PIP-II Project

High-beta (HB) and low-beta (LB) 650 MHz cryomodules are key components of the Proton Improvement Plan II (PIP-II) project. In this contribution we present the results of several 5-cell HB650 cavities that have been processed and tested with the purpose of qualifying them for the prototype cryomodule assembly, which will take place later this year. We also present the first results obtained in LB650 single-cell cavities process optimization. Taking advantage of their very similar geometry, we are also analyzing the effect of different surface treatments in FRIB’s 5-cell medium-beta 644MHz cavities. Cavities processed with N-doping and mid-T baking showed very promising results in term of both Q-factors and accelerating gradient for these low-beta structures.

43 PARTICLE ACCELERATORS↗

STC Qualification Tests of PIP-II HB650 Cavities

Design of the high beta 650 MHz prototype cryomodule for PIP-II is currently undergoing at Fermilab. The cryomodule includes six 5-cell elliptical SRF cavities with accelerating voltage up to 20 MV and low heat dissipation (Q₀ > 3.3 · 10^{z}EhNZeHn). Characterization of performance of fully integrated jacketed cavities with high power coupler and tuner is crucial for the project. Such a characterization of jacketed cavity requires a horizontal test cryostat. The Fermilab Spoke Test Cryostat (STC) has been upgraded to accommodate testing of 650 MHz cavities. Commissioning of upgraded STC has been reported at SRF’19 conference. In this paper we present results of testing of the prototype HB650 cavity in upgraded STC facility. We characterize cavity performance and qualify it for the prototype HB650 cryomodule assembly.

43 PARTICLE ACCELERATORS↗

Nb3Sn Coating of Twin Axis Cavity for SRF Applications

The twin axis cavity with two identical accelerating beams has been proposed for Energy recovery linac (ERL) applications. Nb3Sn is a superconducting material with a higher critical temperature and a higher critical field as compared to Nb, which promises a lower operating cost due to higher quality factors. Two niobium twin axis cavities fabricated at JLab and were proposed to be coated with Nb3Sn. Due to their more complex geometry, the typical coating process used for basic elliptical cavities needs to be improved to coat these cavities. This devel-opment advances the current coating system at JLab for coating complex cavities. Two twin axis cavities were coated recently for the first time. This contribution dis-cusses initial results from coating of twin axis cavities, RF testing and witness sample analysis with an overview of the current challenges towards high performance Nb3Sn coated twin axis cavities.

Tiskumara, J.↗

Searches for New Particles, Dark Matter, and Gravitational Waves with SRF Cavities

This is a Snowmass white paper on the utility of existing and future superconducting cavities to probe fundamental physics. Superconducting radio frequency (SRF) cavity technology has seen tremendous progress in the past decades, as a tool for accelerator science. With advances spear-headed by the SQMS center at Fermilab, they are now being brought to the quantum regime becoming a tool in quantum science thanks to the high degree of coherence. The same high quality factor can be leveraged in the search for new physics, including searches for new particles, dark matter, including the QCD axion, and gravitational waves. We survey some of the physics opportunities and the required directions of R&D. Given the already demonstrated integration of SRF cavities in large accelerator systems, this R&D may enable larger scale searches by dedicated experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Status of PIP-II 650 MHz Prototype Dressed Cavity Qualification

Low-beta and high-beta sections of PIP-II linac will use nine low-beta cryomodules with four cavities each and four high-beta cryomodules with six cavities each. These cavities will be produced and qualified in collaboration between Fermilab and the international partner labs. Prior to their installation into prototype cryomodules, several dressed cavities, which include jacketed cavities, high power couplers, and tuners, will be qualified in STC horizontal test bed at Fermilab. After qualification of bare β = 0.9 cavities at Fermilab, several pre-production β = 0.92 and β = 0.61 cavities have been and are being fabricated and qualified. Procurements have also been started for high power couplers and tuners. In this contribution we present the current status of prototype dressed cavity qualification for PIP-II.

43 PARTICLE ACCELERATORS↗

Simulations of Nb$_3$Sn Layer RF Field Limits Due to Thermal Impedance

Nb3Sn performance in RF fields is limited to fields far below its superheating critical field. Poor thermal conductivity of Nb3Sn has been speculated to be the reason behind this limit. In order to better understand the contribution of Nb3Sn thermal conductivity to its RF performance, we simulated numerically with Matlab program*(based on SRIMP and HEAT codes) thelimiting fields under different realistic conditions. Our simulations indicate that limiting fields observed presently in the experiments with RF fields cannot be explained by the thermal impedance of Nb3Sn alone. The results change significantly in the presence of higher losses due to extrinsic mechanisms.

43 PARTICLE ACCELERATORS↗

Fabrication and Radio Frequency Properties of 3-GHz SRF Cavities Coated with MgB 2

Magnesium diboride (MgB 2 ) is considered a potential material for superconducting radio frequency cavities. MgB 2 coated Cu cavity will allow for a higher operational temperature than a bulk Nb cavity because of the higher transition temperature of MgB 2 and the high thermal conductivity of Cu. Using the hybrid physical chemical vapor deposition technique, MgB 2 coatings were successfully achieved on the inner wall of 3-GHz Cu cavities. The surface and superconducting properties of the coatings were characterized using small samples on Cu plugs mounted at different locations of mock cavities. RF measurement of a MgB 2 coated single-cell 3-GHz test cavity was carried out and it showed superconducting transition at 36 K. Here, the quality factor of this test cavity was lower than expected due to poor connectivity and inclusion of Mg-Cu alloy in the MgB 2 coating.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of RF losses and material characterization of samples removed from a Nb 3 Sn-coated superconducting RF cavity

Nb 3 Sn (T c ≈18 K and H sh ≈400 mT) is a prospective material to replace Nb (T c ≈9 K and H sh ≈200 mT) in SRF accelerator cavities for significant cost reduction and performance enhancement. Because of its material properties, Nb3Sn is best employed as a thin film (coating) inside an already built RF cavity structure. A particular test cavity noted as C3C4 was a 1.5 GHz single-cell Nb cavity, coated with Nb3Sn using Sn vapor diffusion process at Jefferson Lab. Cold measurements of the coated cavity indicated the superconducting transition temperature of about 18 K. Subsequent RF measurements indicated field-dependent surface resistance both at 4.3 K and 2.0 K. After initial cold measurements, the cavity RF loss distribution was studied with a thermometry mapping system. Loss regions were identified with thermometry and were cut out for material analysis. The presence of significantly thin patchy regions and other carbon-rich defects is associated with strong local field-dependent surface resistance. This paper summarizes RF and thermometry results correlated with material science findings.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron backscatter diffraction of Nb 3 Sn coated niobium: Revealing structure as a function of depth

Over the last two decades, advances in Electron Backscatter Diffraction (EBSD) have moved the technique from a research tool to an essential characterization technique in many fields of material research. EBSD is the best suited technique for determining structure as a function of depth. This characterization is critically important, but has been previously absent from Nb 3 Sn efforts. While EBSD is the technique of choice, obtaining quality data can be difficult. Sample preparation in particular is non-trivial. Here we summarize the general principles of EBSD, discuss specific sample preparation techniques for Nb 3 Sn coated SRF cavity material, and give examples of how EBSD is being used to understand fundamental growth mechanisms for Nb 3 Sn coatings.

36 MATERIALS SCIENCE↗

Structural and superconducting properties of Nb 3 Sn films grown by multilayer sequential magnetron sputtering

Nb 3 Sn thin films are fabricated by sequential sputtering followed by annealing at 850–1200°C in vacuum. The effects of the annealing temperature and time on the formation of Nb 3 Sn were examined. The film crystal structure, morphology, surface topography and composition were distinguished by X-ray diffraction, field-emission scanning electron microscopy, atomic force microscopy, and energy dispersive X-ray spectroscopy analysis. The superconducting properties of the films were characterized by measuring the surface resistivity by the four-point probe method. The highest critical temperature T c = 17.86 K was observed for the Nb 3 Sn films annealed at 950°C for 3 h. When the films were annealed above 1000°C for 3 h, Sn evaporation resulted in a Nb-rich film, degrading the superconducting performance. Annealing at 1200°C for 3 h resulted in evaporation of Sn leaving less than 1% Sn on the surface, as detected by energy dispersive spectroscopy, and for that film a T c of 7.9 K was observed.

36 MATERIALS SCIENCE↗

Nb3Sn growth on niobium in vapor diffusion process and its application to large RF surface

Nb3Sn-coated SRF cavities can potentially achieve superior performance in terms of quality factor, accelerating gradient, and operating temperature. Tin vapor diffusion process of Nb3Sn coating on Nb is a simple, yet efficacious technique to fabricate Nb3Sn-coated SRF cavities. The process comprises two¬ steps: ?nucleation? followed by ?deposition?. The crucible with Sn/SnCl2 and the substrate at a constant temperature of about 500 °C for several hours is the ?nucleation?; the crucible and the substrate at a constant temperature, typically, above 1000 °C is the ?deposition? step. Using custom-built sample coating chamber, we have coated over a hundred samples to systematically study the vapor diffusion process under varying process conditions and at different stages of the coating process. The surfaces, thus obtained, were investigated with surface studies techniques, such as SEM/EDS, AFM, XPS, SAM, SIMS, EBSD and TEM. Based on the experimental results, we will discuss nucleation and growth of Nb3Sn coating during vapor diffusion process.

Pudasaini, Uttar↗

Nb3Sn Multilayer Sequential Sputtering at Jefferson Lab

Nb3Sn-coated Nb SRF cavities are studied due to their potential of providing a higher accelerating gradient over Nb SRF cavities. Magnetron sputtering can be a feasible alternative to conventional tin vapor diffusion process to fabricate Nb3Sn for SRF cavities. By depositing Nb and Sn layers separately and annealing afterwards, the stoichiometry of the coated films can be controlled to create Nb3Sn. To understand the formation of Nb3Sn at higher annealing temperatures, a comparative study of deposition and processing conditions is required. We have sputtered Nb and Sn multilayers and post-deposition annealed at 850, 950, 1000, 1100 and 1200 °C for 3 hours. The structural properties of the annealed films were characterized by X-ray diffraction (XRD) and compared to as-coated films. The film microstructures and compositions were examined by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). The superconducting transition of the films were measured by surface resistivity data obtained down to cryogenic temperatures. A new cavity deposition system with a cylindrical magnetron has been designed to implement the sequential sputtering technique onto a single-cell cavity.

Eremeev, Grigory↗

Materials path toward improved energy efficiency for High Energy Physics accelerators

For nearly fifty years researchers working with particle accelerators have envisioned reducing their initial and operating costs by substituting the intermetallic compound Nb 3 Sn for Nb as the cavity interior surface. The goal has remained elusive, stymied especially by the fall of cavity quality factor (representing increasing energy consumption) with increasing gradient (the amount of accelerator need to reach an energy goal). While one research group reported making a few cavities free of the problem, no one has reported how this comes about or has reproduced the improvement. We believe that insufficient understanding is responsible. We report here findings of a detailed, systematic study of the formation of Nb 3 Sn coatings on Nb, relating structure and properties of the coating to the process parameters and substrate materials on the one hand, and RF surface impedance and SRF cavity performance on the other was carried out, focusing on the two step (nucleation – deposition) tin vapor diffusion process. Major outcomes are: The choice of initial surface preparation (BCP etc) has no discernable impact on any quality of the final coating; Though tin chloride serves as the coating nucleant, no trace could be found by any means of chlorine after nucleation or coating; No evidence was found for any substantive impact of the details of the nucleation on the ultimate coating, as long as it was done within the frequently used range; The coating forms as Nb 3 Sn crystals by tin from the vapor diffusing down grain boundaries to the Nb interface and growing there. Higher temperature and longer time lead to larger, but otherwise substantially identical crystals; All coatings exhibited roughness on the micron scale. Testing the effect of coating surface modification technologies in use by the community, only a carefully tailored electropolish showed significant benefit; and, Preliminary results indicate that Ti contamination may be associated with falling gradient. Two particular item appear promising for future work. The effect of surface topography in the range seen here on performance is significant for niobium. The nature and impact on Nb 3 Sn, if any, needs to be understood and managed. At what level Ti, Ta or other impurities affects the performance of Nb 3 Sn needs to be understood.

36 MATERIALS SCIENCE↗

Examination of cutouts from Nb3Sn coated cavity inner surfaces

The potential for higher operating temperature and higher gradient have motivated SRF cavity researchers to pursue Nb3Sn as an alternative to Nb for nearly fifty years. Far and away the most common embodiment has been a few micron-thick Nb3Sn layer on the cavity interior surface obtained by vapor diffusion coating, with one or another set of parameters. While many cavities have been made and RF tested, reports of dissecting a cavity in detail to examine the coating and relate it to RF measurements are rare. We coated a BCP-treated single cell cavity in a typical process of tin/tin chloride activation at 500 C followed by tin vapor deposition at 1200 C. After RF-testing, we cut and examined sections from several locations to learn composition, thickness topography of the interior surface. The effect of process variables, such as surface preparation, process temperature and duration, and vapor chemistry needs to be explored.

Eremeev, Grigory↗

Progress towards Nb3Sn CEBAF Injector Cryomodule

Operations at 4 K instead of 2 K have the potential to reduce the operational cost of an SRF linac by a factor of 3, if the cavity quality factor can be maintained. Cavities coated with Nb3Sn have been shown to achieve the accelerating gradients above 10 MV/m with a quality factor around 1010 at 4 K. Because such performance is already pertinent for CEBAF injector cryomodule, we are working to extend these results to CEBAF accelerator cavities envisioning coating of two CEBAF 5-cell cavities with Nb3Sn. They will be installed in an injector cryomodule and tested with beam. The progress on this path is reported in this contribution.

Eremeev, Grigory↗

Experimental Study of Nucleation for Nb3Sn Diffusion Coatings on Niobium SRF cavities

Nb3Sn has the potential to achieve superior performance both in terms quality factor and accelerating gradient resulting in significant reduction in both initial and operating costs of SRF linacs. Cavity interior surface coatings are obtained by two-step vapor diffusion: nucleation followed by deposition. To gain more understanding of nucleation and its effect on the subsequent coating, we investigated the effect of varying parameters in a typical tin/tin chloride process. We report findings obtained by SEM/EDS, AFM, SAM and other materials characterization approaches.

Pudasaini, Uttar↗