Search NASA⌕ Search

Engineering topics

Eren, Baran

Publications and source records attributed to Eren, Baran.

At least 19 records

Chemical state of nickel nanoparticles during the oxygen evolution reaction in a carbonate-bicarbonate buffer solution

The chemical state of nickel anodes during the oxygen evolution reaction can impact their electrocatalytic performance. Here, X-ray photoelectron and absorption spectroscopies reveal the chemical state of nickel nanoparticles under oxygen evolution reaction conditions in amildly alkaline carbonate-bicarbonate buffer solution. Ni 2+ and Ni 3+ species are observed at the reaction onset potential with a 7:4 ratio, with no remaining metallic nickel. These species include NiO, which increasingly converts to other Ni 2+ and Ni 3+ species once the potential is increased above the onset potential. Conversely, when a 20-nm-thick nickel film is used instead of nickel nanoparticles, a significant amount of metallic nickel remains in the inner layers. Nickel nanoparticles also undergo significant morphological and structural changes during the reaction, as evidenced by ex situ transmission electron microscopy. Amorphization of the nanoparticles is attributed to significant H 2 O incorporation, with the oxygen intensity increasing both in operando and ex situ measurements.

36 MATERIALS SCIENCE↗

Molecular-level insights into CO 2 activation on Ni(111) from in situ infrared spectroscopy

The activation of CO 2 on nickel surfaces is the first step of various CO 2 conversion processes. Consequently, understanding the surface intermediates formed during this step and their adsorption sites is crucial for elucidating reaction mechanisms. In this study, we employ in situ infrared spectroscopy to investigate the interaction of 1 mbar CO 2 with a model Ni(111) catalyst between 25°C and 300°C. Under these conditions, CO 2 is activated via a direct dissociation into CO and atomic oxygen, while the oxidation state of the Ni(111) surface is primarily determined by residual H 2 and O 2 . The high surface coverage of CO and oxygen at ambient CO 2 pressure induces a competitive adsorption mechanism on the energetically favored hollow sites. This mechanism leads to a temperature-dependent distribution of CO between top and hollow sites, potentially explaining the effect of reaction conditions on the adsorption site of CO intermediates in CO 2 conversion reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxidation and Reduction of Polycrystalline Cerium Oxide Thin Films in Hydrogen

This study investigates the oxidation state of ceria thin films' surface and subsurface under 100 mTorr hydrogen using ambient pressure X-ray photoelectron spectroscopy. We examine the influence of the initial oxidation state and sample temperature (25-450 °C) on the interaction with hydrogen. Our findings reveal that the oxidation state during hydrogen interaction involves a complex interplay between oxidizing hydride formation, reducing thermal reduction, and reducing formation of hydroxyls followed by water desorption. In all studied conditions, the subsurface exhibits a higher degree of oxidation compared to the surface, with a more subtle difference for the reduced sample. The reduced samples are significantly hydroxylated and covered with molecular water at 25 °C. We also investigate the impact of water vapor impurities in hydrogen. We find that although 1 × 10 -6 Torr water vapor oxidizes ceria, it is probably not the primary driver behind the oxidation of reduced ceria in the presence of hydrogen.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic interactions and stability issues at the copper-graphene interface in air and in alkaline solution under electrochemical control

A micro-electrochemical cell is sealed with a polymer-free single-layer graphene (SLG) membrane to monitor the stability of Cu nanoparticles (NPs) attached to SLG, as well as the interfacial electronic interactions between Cu NPs and SLG both in air and in a mildly alkaline aqueous solution under electrochemical control. A combination of techniques, including in-situ Kelvin probe force microscopy (KPFM) and ex-situ electron microscopy, are applied. When Cu NPs are metallic at cathodic potentials, there is a relatively bias-independent offset in the SLG work function due to charge transfer at the Cu-SLG contact. When Cu NPs are oxidized at anodic potentials, on the other hand, the work function of SLG also depends on the applied bias in a quasi-linear fashion due to electrochemical gating, in addition to charge transfer at the CuOx-SLG contact. Furthermore, Cu NPs were found to oxidize and detach from SLG when kept under anodic potentials for a few hours, whereas they remain adhered to SLG at cathodic potentials. This is attributed to water intercalation at the CuO-SLG interface associated with the enhanced hydrophilicity of positively polarized graphene, as supported by the absence of Cu detachment following oxidation by galvanic corrosion in air.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Methanol Decomposition on Copper Surfaces under Ambient Conditions: Mechanism, Surface Kinetics, and Structure Sensitivity

Here, we study the adsorption of methanol vapor under ambient pressure and temperature conditions on low-index Cu surfaces using surface-sensitive infrared (IR) and X-ray spectroscopy techniques. The first step of methanol decomposition, i.e. , breaking of the O—H bond to form surface-bound methoxy, readily occurs under ambient conditions. Time-lapse IR spectra clearly indicate a gradually decreasing methoxy coverage, which does not obey well established kinetic models. We rationalize the initial temperature-independent, high, nonequilibrium coverage of methoxy by a H-bonded methanol assembly in the precursor state. A temperature-dependent equilibrium coverage is achieved as the excess methoxy is eliminated gradually via further dehydrogenation to CO that desorbs to the gas phase. The kinetics of this process displays a significant structure sensitivity with considerably faster kinetics on the Cu(110) surface compared to Cu(111) and Cu(100) surfaces.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

CO Oxidation Mechanisms on CoO x -Pt Thin Films

The reaction of CO and O 2 with submonolayer and multilayer CoO x films on Pt(111), to produce CO 2 , was investigated at room temperature in the mTorr pressure regime. Here, using operando ambient pressure X-ray photoelectron spectroscopy and high pressure scanning tunneling microscopy, as well as density functional theory calculations, we found that the presence of oxygen vacancies in partially oxidized CoO x films significantly enhances the CO oxidation activity to form CO 2 upon exposure to mTorr pressures of CO at room temperature. In contrast, CoO films without O-vacancies are much less active for CO 2 formation at RT, and CO only adsorbed in the form of carbonate species that are stable up to 260 °C. On submonolayer CoO x islands, the carbonates form preferentially at island edges, deactivating the edge sites for CO 2 formation, even while the reaction proceeds inside the islands. These results provide a detailed understanding of CO oxidation pathways on systems where noble metals such as Pt interact with reducible oxides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bimetallic synergy in cobalt–palladium nanocatalysts for CO oxidation

Bimetallic and multi-component catalysts often exhibit superior activity and selectivity compared with their single-component counterparts. To investigate the origin of the composition dependence observed in the catalytic activities of CoPd bimetallic catalysts, the compositional and structural evolution of monodisperse CoPd alloy nanoparticles (NPs) were followed under catalytic CO oxidation conditions using ambient pressure X-ray spectroscopy (AP-XPS) and transmission electron microscopy (TEM). It was found that the catalysis process induced a reconstruction of the catalysts, leaving CoOx on the NP surface. The synergy between Pd and CoOx coexisting on the surface promotes the catalytic activity of the bimetallic catalysts. Such synergistic effects can be optimized by tuning the Co/Pd ratios in the NP synthesis and reach a maximum at compositions near Co 0.26 Pd 0.74 , which exhibits the lowest temperature for complete CO conversion. Our combined AP-XPS and TEM studies provide a direct observation of the bimetallic NPs surface evolution under catalytic conditions and its correlation to catalytic properties.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Operando STM study of the interaction of imidazolium-based ionic liquid with graphite

Understanding interactions at the interfaces of carbon with ionic liquids (ILs) is crucially beneficial for the diagnostics and performance improvement of electrochemical devices containing carbon as active materials or conductive additives in electrodes and ILs as solvents or additives in electrolytes. The interfacial interactions of three typical imidazolium-based ILs, 1-alkyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (AMImTFSI) ILs having ethyl (C 2 ), butyl (C 4 ) and octyl (C 8 ) chains in their cations, with highly oriented pyrolytic graphite (HOPG) were studied in-situ by electrochemical scanning tunneling microscopy (EC-STM). The etching of HOPG surface and the exfoliation of graphite/graphene flakes as well as cation intercalation were observed at the HOPG/C 2 MImTFSI interface. The etching also takes place in C 4 MImTFSI at -1.5 V vs Pt but only at step edges with a much slower rate, whereas C 8 MIm + cations adsorbs strongly on the HOPG surface under similar conditions with no observable etching or intercalation. Finally, the EC-STM observations can be explained by the increase in van der Waals interaction between the cations and the graphite surface with increasing length of alkyl chains.

25 ENERGY STORAGE↗

Predicting Surface Clustering at Ambient Conditions from Thermodynamic Data

Scanning tunneling microscopy (STM) has proved to be a prime tool to characterize the atomic structure of crystal surfaces under UHV conditions. With the development of high-pressure scanning tunneling microscopy (HP-STM), the scope of this technique has been largely extended, as new structures were found to occur under gas phase chemical potentials achieved under ambient conditions. Particularly interesting is the substantial restructuring of initially flat and stable surfaces into new orientations by formation of nanoclusters. Here we discuss the possible generality of this phenomenon by analyzing cases where atomically flat surfaces of certain transition metals undergo such changes in the presence of CO at room temperature (RT) while some remain unchanged. From our analysis we argue that such changes can be predicted from thermodynamic data published in the literature, particularly from the difference in adsorption energy on low-and high-coordination sites, like terrace and step sites, which can be obtained from thermal desorption spectroscopy (TDS) measurements, and possibly also from theoretical calculations. Finally, for the vicinal surfaces with high Miller indices, changes in the repulsive elastic interactions between the ordered steps due to adsorbates may also play an important role.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure of Copper–Cobalt Surface Alloys in Equilibrium with Carbon Monoxide Gas

Here, we studied the structure of the copper–cobalt (CuCo) surface alloy, formed by Co deposition on Cu(110), in dynamic equilibrium with CO. Using scanning tunneling microscopy (STM), we found that, in vacuum at room temperature and at low Co coverage, clusters of a few Co atoms substituting Cu atoms form at the surface. At CO pressures in the Torr range, we found that up to 2.5 CO molecules can bind on a single Co atom, in carbonyl-like configurations. Based on high-resolution STM images, together with density functional theory calculations, we determined the most stable CuCo cluster structures formed with bound CO. Such carbonyl-like formation manifests in shifts in the binding energy of the Co core-level peaks in X-ray photoelectron spectra, as well as shifts in the vibrational modes of adsorbed CO in infrared reflection absorption spectra. The multiple CO adsorption on a Co site weakens the Co–CO bond and thus reduces the C–O bond scission probability. Our results may explain the different product distribution, including higher selectivity toward alcohol formation, when bimetallic CuCo catalysts are used compared to pure Co.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure of the Clean and Oxygen-Covered Cu(100) Surface at Room Temperature in the Presence of Methanol Vapor in the 10–200 mTorr Pressure Range

Using ambient pressure X-ray photoelectron spectroscopy (APXPS) and high pressure scanning tunneling microscopy (HPSTM), we show that in equilibrium with 0.01–0.2 Torr of methanol vapor, at room temperature, the Cu(100) surface is covered with methoxy species forming a c(2 × 2) overlayer structure. In contrast, no methoxy is formed if the surface is saturated with an ordered oxygen layer, even when the methanol pressure is 0.2 Torr. At oxygen coverages below saturation, methanol dissociates and reacts with the atomic oxygen, producing methoxy and formate on the surface, and formaldehyde that desorbs to the gas phase. Unlike the case of pure carbon monoxide and carbon dioxide, methanol does not induce the restructuring of the Cu(100) surface. These results provide insight into catalytic anhydrous production of aldehydes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ambient-Pressure X-ray Photoelectron Spectroscopy Study of Cobalt Foil Model Catalyst under CO, H 2 , and Their Mixtures

Ambient-pressure X-ray photoelectron spectroscopy (XPS) was used to investigate the reactions of CO, H 2 , and their mixtures on Co foils. We found that CO adsorbs molecularly on the clean Co surface and desorbs intact in vacuum with increasing rate until ~90°C where all CO desorbs in seconds. In equilibrium with 100 mTorr gas, CO dissociates above 120°C, leaving carbide species on the surface but no oxides, because CO efficiently reduces the oxides at temperatures ~100°C lower than H 2 . Additionally, water as impurities or produced by reaction of CO and H 2 efficiently oxidizes Co even at room temperature. Under 97:3 CO/H 2 mixture and with increasing temperatures, the Co surface becomes more oxidized and covered by hydroxyl groups until ~150°C where surface starts to get reduced, accompanied by carbide accumulation indicative of CO dissociation. A similar trend was observed for 9:1 and 1:1 mixtures, but surface reduction begins at higher temperatures. (Figure Presented).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

One-dimensional nanoclustering of the Cu(100) surface under CO gas in the mbar pressure range

The bulk terminated Cu(100) surface becomes unstable in the presence of CO at room temperature when the pressure reaches the mbar range. Scanning tunneling microscopy images show that above 0.25 mbar the surface forms nanoclusters with CO attached to peripheral Cu atoms. At 20 mbar and above 3-atom wide one-dimensional nanoclusters parallel to < 001 > directions cover the surface, with CO on every Cu atom, increasing in density up to 115 mbar. Density functional theory explains the findings as a result of the detachment of Cu atoms from step edges caused by the stronger binding of CO relative to that on flat terraces.

Chemistry↗