Search NASA⌕ Search

Engineering topics

Erin Hayward

Publications and source records attributed to Erin Hayward.

Development of Cryogenic Phase Change Materials for Lunar Sample Return

One of the scientific goals of NASA’s Artemis missions is to return regolith samples from the lunar surface. To maintain scientific integrity of these samples, including any volatiles that may exist, cryogenic stowage is desired. FROSTE (Frozen Return Of Samples To Earth) is the element of the Moon to Mars architecture that is tasked with developing and advancing concepts related to this goal. Both active and passive solutions are being considered, but active solutions (cryo-coolers) have high mass and cost penalties. Phase change materials (PCMs) are commonly used as passive thermal management solutions, particularly for sensitive scientific samples. However, there are currently no PCMs capable of providing cooling at the cryogenic temperatures needed to enable lunar sample return with volatiles intact (<120 K). FROSTE has identified two possible candidate materials that could fill this gap. Testing is required to verify the thermal performance of these materials, as well as gain experience with their handling characteristics. We are conducting this testing at the Marshall Space Flight Center’s Space Environmental Effects laboratory, in vacuum, with liquid nitrogen providing cooling ability below the freezing point of the materials. In this talk, we will present an overview of the FROSTE program element and share results from the initial development testing of two cryogenic phase change materials.

phase change material↗

KNaCK-SLAM: Kinematic Navigation and Cartography Knapsack Velocity-aided LiDAR Inertial Simultaneous Localization and Mapping (SLAM)

As manned missions return to the Moon and continue on to Mars in the near future, surface navigation and mapping in extremely low solar illumination and unstructured environments without navigation aids like Global Navigation Satellite Systems (GNSS) becomes more important than even. This work explores the use of LiDAR-based Simultaneous Localization and Mapping (SLAM) to solve those problems. A LiDAR-based SLAM system be deployed as a self-contained instrument independent of external sensor inputs, and can operate in unlit environments where Vision-based SLAM system are inoperable. Furthermore, the advent of chip-scale frequency modulated continuous wave (FMCW) LiDAR technology provides Doppler-velocity information for each sensed point in the scene, which can be used to further constrain localization error in the SLAM front-end. Here we discuss the development of SLAM algorithm that makes use of the unique velocity and range sensing capabilities of FMCW-LiDAR based sensors for rover and kinematic (i.e. person-mounted) mobile navigation and terrain mapping applications for surface exploration and scientific investigations.

Kyle Miller↗

Thermal Control Coating Charging Tests for the Europa Clipper Mission

Thermal control coatings are an essential part of spacecraft systems. Typically, these coatings are directly exposed to the space environment, which means they must be designed and applied in a manner that can withstand exposure to radiation, ultra-violet light, thermal cycles, etc. In the case of the Europa Clipper mission, the thermal control coatings must also have relatively low resistivity in order to minimize electrostatic charging (and discharging) due to the abundant low-energy plasma populations in the Jovian environment. This paper will present the results of a test campaign led by NASA’s Jet Propulsion Laboratory (JPL) to find thermal control coating solutions that minimized the occurrence of electrostatic discharges – even at cryogenic temperature conditions. The customized laboratory test system at NASA’s Marshall Space Flight Center will be described, along with the test requirements and conditions. Finally, a summary of the coatings with the best electrostatic characteristics will be provided.

Thermal Control Coatings↗

Overview of Space Environmental Effects (SEE) Team Electrostatic Discharge (ESD) Testing

Electrostatic discharge (ESD) due to the radiation environment encountered during spaceflight missions is a serious risk that must be mitigated by careful testing and design considerations. The MSFC Space Environmental Effects (SEE) Team has world-class facilities for ESD testing along with decades of experience. The Team has recently conducted successful campaigns for several high-profile projects including Europa Clipper, Exploration Upper Stage, Lunar Gateway, Orion, Docking System, and Human Landing System. This presentation will give a brief overview of ESD causes, hazards, test methods and test deliverables.

Peter Bertone↗

Caves as Planetary Analogs for GPS Denied, Low-Light Mapping and Navigation in Rugged Environments

KNaCK (Kinematic Navigation and Cartography Knapsack) is a backpack-mounted mobile mapping system. It can map its surroundings in 3 dimensions and localize itself in space using a LiDAR (Light Detection and Ranging) sensor and SLAM (Simultaneous Localization and Mapping) algorithm. The KNaCK team is leveraging caves as a proving ground to refine technology for mapping and navigation on other worlds while simultaneously advancing the State of the Art for terrestrial cave exploration and study.

LiDAR↗

Analog Missions: Exploring the Human Element

Analog missions help NASA discover what the crew experience will be like on long duration exploration missions. A brief overview of HERA, the Human Exploration Research Analog, is given.

analog↗

Caves as Planetary Analogs for GPS Denied, Low-Light Mapping and Navigation in Rugged Environments

KNaCK (Kinematic Navigation and Cartography Knapsack) is a backpack-mounted mobile mapping system. It can map its surroundings in 3 dimensions and localize itself in space using a LiDAR (Light Detection and Ranging) sensor and SLAM (Simultaneous Localization and Mapping) algorithm. The KNaCK team is leveraging caves as a proving ground to refine technology for mapping and navigation on other worlds while simultaneously advancing the State of the Art for terrestrial cave exploration and study.

LiDAR↗

Metallic Environmentally Resistant Coatings Rapid Innovation Initiative (MERCRII) Mechanism Development and Testing

This project seeks to address the high friction and low wea resistance of lightweight aluminum (Al) and titanium (Ti) alloys to extend the lifetime and sustainability of both lunar and Martian assets missions by developing advanced wear-and radiation-resistant. MERCRII started with 6 candidate coating materials and 3 candidate application methods that were down-selected through pathfinder and 2 phases of testing to one coating configuration: Ti64 with 2%hBN Vacuum Plasma Spray.

dust mitigation↗

Update on Planetary, Lunar, & Asteroid Natural Environment Testbed (PLANET)

At ISMSE15, the Planetary, Lunar, & Asteroid Natural Environment Testbed (PLANET) was introduced as an upcoming high-fidelity, combined-effects planetary surface environment laboratory. This year, we will present an update on the facility status, describing the procurement, installation, commissioning of the chamber in Huntsville, Alabama (USA). With NASA’s push to return to the Moon through the Artemis program, there is a clear need for more high-fidelity test chambers that can replicate multiple aspects of the lunar surface, especially the fine, dusty lunar soil known as regolith. The PLANET chamber is designed to fill this gap, enabling research & development, qualification, and verification testing in a combined lunar surface environment, at an affordable price, for government, commercial/industry, and academic partners. Features include a large regolith simulant bed, low energy electron and ion sources to replicate the solar wind, full-spectrum UV and Solar simulation, and a liquid nitrogen cryogenic shroud, all in a high-vacuum environment (as low as 10^-7 mbar). PLANET’s initial focus will be on the lunar environment, but other surface environments (Martian, asteroid, etc.) are also possible to simulate. Besides the environmental instrumentation, PLANET will be equipped with specialized test systems that the Space Environmental Effects Team has developed over the past two years, including an in-situ tribometer and uniform dust distribution system. The chamber is currently being manufactured, with plans to install in May 2024. This will be followed by outfitting and commissioning. The challenges and accomplishments seen during this process will be detailed, and data from the first tests performed in PLANET will be shared with the community.

environmental testing↗