Search NASA⌕ Search

Engineering topics

Erlebacher, Jonah

Publications and source records attributed to Erlebacher, Jonah.

Carbon Dioxide-Free Hydrogen and Solid Carbon from Natural Gas via Metal Salt Intermediates

Production of hydrogen with low emissions and low energy input is critical for the clean energy transition, enabling all sectors of the economy to decarbonize – from electricity generation to residential heating to industrial power. In this program, Johns Hopkins University in partnership with ETCH, INC translated a novel laboratory-scale chemistry to decompose methane to hydrogen and solid carbon into a pre-commercial system. Central to the process is a closed-loop thermocatalytic redox cycle without water consumption or carbon dioxide generation that can be implemented with low capital and operating costs. Techno-economic and lifecycle analysis suggests this approach will produce the lowest cost and lowest-emissions route to hydrogen production.

03 NATURAL GAS↗

Topological control of liquid-metal-dealloyed structures

Abstract The past few years have witnessed the rapid development of liquid metal dealloying to fabricate nano-/meso-scale porous and composite structures with ultra-high interfacial area for diverse materials applications. However, this method currently has two important limitations. First, it produces bicontinuous structures with high-genus topologies for a limited range of alloy compositions. Second, structures have a large ligament size due to substantial coarsening during dealloying at high temperature. Here we demonstrate computationally and experimentally that those limitations can be overcome by adding to the metallic melt an element that promotes high-genus topologies by limiting the leakage of the immiscible element during dealloying. We further interpret this finding by showing that bulk diffusive transport of the immiscible element in the liquid melt strongly influences the evolution of the solid fraction and topology of the structure during dealloying. The results shed light on fundamental differences in liquid metal and electrochemical dealloying and establish a new approach to produce liquid-metal-dealloyed structures with desired size and topologies.

36 MATERIALS SCIENCE↗

Self-assembled porous metal-intermetallic nanocomposites via liquid metal dealloying

A major challenge in the synthesis of high surface area metals via subtractive processes such as dealloying is maintaining the mechanical integrity of the resulting porous materials. This issue is especially apparent in liquid metal dealloying, in which high-temperature selective dissolution in a molten metal bath leads to bicontinuous porosity formation. In liquid metal dealloying of polycrystalline alloys, grain boundary separation leads to the detachment of individual grains. In this work, we show that addition of small amounts of silicon to Nbsingle bondTi or Tasingle bondTi parent alloys leads to the generation of self-assembled arrays of intermetallic (niobium silicide or tantalum silicide) plates that are structurally merged with the usual bicontinuous porosity seen in dealloying. These silicide plates pass through grain boundaries and hold the niobium or tantalum network intact without strongly affecting the microstructural evolution during dealloying. Our approach yields a mechanically robust porous metal-intermetallic composite, which can be further processed to form tertiary materials via re-impregnation by a new third phase. The materials design strategy introduced here can be generalized to serve as a platform to form dense multiphase nanocomposites.

36 MATERIALS SCIENCE↗

Control of Reactivity in Nanoporous Metal/Ionic Liquid Composite Catalysts

In this program, we explored a new concept in nanostructured heterogeneous catalysis design – the nanoporous metal/ionic liquid (IL) composite. Over the course of this entire program from inception, we produced sixteen publications [DOE1-DOE16]. The idea behind this concept was to tailor the chemical environment within and near the pores of a nanoporous high surface area metal electrocatalyst in order to enhance the aggregate composite activity and selectivity. Most electrocatalyst design focuses upon lowering the activation barrier for a particular synthesis reaction. While we also try to minimize this quantity, one should also recognize that significant catalytic enhancements can be made by biasing the reaction to completion via control of the environment in which the reaction occurs. Specific ideas we explored in this program included (a) chemically biasing mass transport of reactants to the catalyst surface and products away from it, and (b) corralling of reactants and products to spatially separate them and reduce side reactions. We made a particular focus on electrocatalysis under kinetically limited conditions, and in which the catalyst is a nanoporous metal and the biasing environment is an ionic liquid impregnating the pores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pattern formation during electrochemical and liquid metal dealloying

Dealloying has evolved from a problematic corrosion process to a versatile tool for scalable fabrication of nanostructured metals. While the original, and majority of, work in the area has focused on electrochemical dealloying, a powerful variation of dealloying—liquid metal dealloying—has recently gained popularity. This process relies on a melt to carry out selective dissolution, replacing the traditional electrolyte solution. While electrolytes and molten metals are both suitable dealloying media, they can lead to very different morphologies. In this article, we compare and contrast what is known about the microscale physics and chemistry controlling microstructural evolution in electrochemical and liquid metal dealloying. Here, we conclude that the core phenomenology of porosity evolution—a competition between dissolution and interface diffusion—is similar in both dealloying processes, but that the relative magnitudes of these two processes control interfacial pattern formation.

McCue, Ian↗

Balancing activity, stability and conductivity of nanoporous core-shell iridium/iridium oxide oxygen evolution catalysts [Balancing activity, stability and conductivity of nanoporous core-shell Ir/IrO 2 oxygen evolution catalysts]

The selection of oxide materials for catalyzing the Oxygen Evolution Reaction in acid-based electrolyzers must be guided by the proper balance between activity, stability and conductivity – a challenging mission of great importance for delivering affordable and environmentally friendly hydrogen. Here we report that the highly conductive nanoporous architecture of an iridium oxide shell on a metallic iridium core, formed through the fast dealloying of osmium from an Ir 25 Os 75 alloy, exhibits an exceptional balance between oxygen evolution activity and stability as quantified by the Activity-Stability FactorASF. Based on this metric, the nanoporous Ir/IrO 2 morphology of dealloyed Ir 25 Os 75 shows a factor of ~30 improvement ASFrelative to conventional Ir-based oxide materials and a ~8 times improvement over dealloyed Ir 25 Os 75 nanoparticles due to optimized stability and conductivity, respectively. Here, we propose that the Activity-Stability FactorASF is the key “metric” for determining the technological relevance of oxide-based anodic water electrolyzer catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A high-throughput technique for determining grain boundary character non-destructively in microstructures with through-thickness grains

Grain boundaries (GBs) govern many properties of polycrystalline materials. However, because of their structural variability, our knowledge of GB constitutive relations is still very limited. We present a novel method to characterise the complete crystallography of individual GBs non-destructively, with high-throughput, and using commercially available tools. This method combines electron diffraction, optical reflectance and numerical image analysis to determine all five crystallographic parameters of numerous GBs in samples with through-thickness grains. We demonstrate the technique by measuring the crystallographic character of about 1,000 individual GBs in aluminum in a single run. Our method enables cost- and time-effective assembly of crystallography–property databases for thousands of individual GBs. Furthermore, such databases are essential for identifying GB constitutive relations and for predicting GB-related behaviours of polycrystalline solids.

36 MATERIALS SCIENCE↗

Kinetics and morphological evolution of liquid metal dealloying

Liquid metal dealloying (LMD) has recently emerged as a novel technique to fabricate bulk nanostructures using a bottom-up self-organization method, but the literature lacks fundamental studies of this kinetic process. In this work, we conduct an in-depth study of the kinetics and fundamental microstructure evolution mechanisms during LMD using Tisingle bondTa alloys immersed in molten Cu as a model system. We develop a model of LMD kinetics based on a quantitative characterization of the effects of key parameters in our system including alloy composition, dealloying duration, and dealloying temperature. Further, this work demonstrates that the dealloying interface is at or near equilibrium during LMD, and that the rate-limiting step is the liquid-state diffusion of dissolving atoms away from the dealloying interface (diffusion-limited kinetics). The quantitative comparison between theoretically predicted and measured dealloying rates further reveals that convective transport and rejection of the dissolving element during coarsening of the structure also influence the dealloying kinetics.

36 MATERIALS SCIENCE↗

Basic Research Needs Workshop on Synthesis Science for Energy Relevant Technology

The technology that lies at our fingertips becomes more powerful each day. Smartphones connect us instantly to family, friends, and co-workers around the globe; give us access to a limitless stream of information; control the heating in our homes; and serve as our cameras, calculators, flashlights, music players, boarding passes and, on occasion, our phones. Cars are ever more fuel-efficient, safer, semi-autonomous, and have more computing power than the systems that guided humankind to the moon. LED lighting and solar panels are becoming commonplace, replacing less efficient technologies and expanding the energy options available worldwide. Novel polymers and nanoparticles are playing a crucial role in enhanced oil recovery. None of these advances would have been possible without the discovery and development of, and ability to create, new materials and chemical processes. Now imagine what our world would be like if we could accelerate those discoveries a thousandfold. What if the only limit to synthesizing new forms of matter were the imagination? We could build complex assemblies of atoms and molecules with architectures and capabilities far exceeding those of materials found in nature—for example, develop catalysts that turn garbage into fuels, design solar cells to power our homes directly from sunlight, make batteries with the energy density of gasoline, and create one- and two-dimensional solids that transport charge hundreds of times faster than silicon or allow us to build quantum bits based on the spins of electrons or photons to realize the promise of “beyond Moore’s law” computing. Advances in synthesis science are required to bring about this future—we not only must know how to design new molecules and materials with desired functions and properties through theory and computational techniques; we also must be able to make the materials we envision. New approaches to discovering as yet unimagined matter require a sea change in the way we think about the science of synthesis. Chemical and materials sciences have traditionally focused on understanding structure–function relationships with the goal of predicting where the atoms should be placed to achieve a targeted property or process. Much less effort has been directed toward a predictive science of synthesis—understanding how to get the atoms where they need to go to achieve the desired structure. This report, which is the result of the Basic Energy Sciences Workshop on Basic Research Needs for Synthesis Science for Energy Technologies, lays out the scientific challenges and opportunities in synthesis science. The workshop was attended by more than 100 leading national and international scientific experts. Its five topical and two crosscutting panels identified four priority research directions (PRDs) for realizing the vision of predictive, science-directed synthesis.

99 GENERAL AND MISCELLANEOUS↗

Topology-generating interfacial pattern formation during liquid metal dealloying

Liquid metal dealloying has emerged as a novel technique to produce topologically complex nanoporous and nanocomposite structures with ultra-high interfacial area and other unique properties relevant for diverse material applications. This process is empirically known to require the selective dissolution of one element of a multicomponent solid alloy into a liquid metal to obtain desirable structures. However, how structures form is not known. Here we demonstrate, using mesoscale phase-field modelling and experiments, that nano/microstructural pattern formation during dealloying results from the interplay of (i) interfacial spinodal decomposition, forming compositional domain structures enriched in the immiscible element, and (ii) diffusion-coupled growth of the enriched solid phase and the liquid phase into the alloy. We highlight how those two basic mechanisms interact to yield a rich variety of topologically disconnected and connected structures. Furthermore, we deduce scaling laws governing microstructural length scales and dealloying kinetics.

36 MATERIALS SCIENCE↗