Search NASA⌕ Search

Engineering topics

Esclapez, Lucas

Publications and source records attributed to Esclapez, Lucas.

At least 19 records

SUNDIALS time integrators for exascale applications with many independent systems of ordinary differential equations

Many complex systems can be accurately modeled as a set of coupled time-dependent partial differential equations (PDEs). However, solving such equations can be prohibitively expensive, easily taxing the world’s largest supercomputers. One pragmatic strategy for attacking such problems is to split the PDEs into components that can more easily be solved in isolation. This operator splitting approach is used ubiquitously across scientific domains, and in many cases leads to a set of ordinary differential equations (ODEs) that need to be solved as part of a larger “outer-loop” time-stepping approach. The SUNDIALS library provides a plethora of robust time integration algorithms for solving ODEs, and the U.S. Department of Energy Exascale Computing Project (ECP) has supported its extension to applications on exascale-capable computing hardware. In this paper, we highlight some SUNDIALS capabilities and its deployment in combustion and cosmology application codes (Pele and Nyx, respectively) where operator splitting gives rise to numerous, small ODE systems that must be solved concurrently.

97 MATHEMATICS AND COMPUTING↗

Symbolic construction of the chemical Jacobian of quasi-steady state (QSS) chemistries for Exascale computing platforms

The Quasi-Steady State Approximation (QSSA) can be an effective tool for reducing the size and stiffness of chemical mechanisms for implementation in computational reacting flow solvers. However, for many applications, the resulting model still requires implicit methods for efficient time integration. Here, in this paper, we outline an approach to formulating the QSSA reduction that is coupled with a strategy to generate C++ source code to evaluate the net species production rates, and the chemical Jacobian. The code-generation component employs a symbolic approach enabling a simple and effective strategy to analytically compute the chemical Jacobian. For computational tractability, the symbolic approach needs to be paired with common subexpression elimination which can negatively affect memory usage. Several solutions are outlined and successfully tested on a 3D multipulse ignition problem, thus allowing portable application across chemical model sizes and GPU capabilities. The implementation of the proposed method is available at https://github.com/AMReX-Combustion/PelePhysics under an open-source license.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multiphysics Time-Integration for Turbulent Combustion at the Exascale

Turbulent reacting flow systems are often modeled with coupled time-dependent partial differential equations (PDEs). Solving such equations can easily tax the world's largest supercomputers. One pragmatic strategy for attacking such problems is to split the PDEs into components that can more easily be solved in isolation. This generic operator-splitting strategy leads to a set of ordinary differential equations (ODEs) that need to be solved as part of an "outer-loop" time-stepping approach. In many combustion applications, the ODEs to be solved can be very stiff, exhibiting timescales that span many orders of magnitude. The SUNDIALS library provides a plethora of robust time integration algorithms for solving these ODEs on exascale-capable computing hardware, yet for many complex applications (such multicomponent fuels or emissions predictions), the chemical models remain too complex to solve using reasonable resources. The Quasi-Steady State Approximation (QSSA) can be an effective tool for reducing the size and stiffness of the simulations. In this talk, I will discuss the use of the SUDIALS library of ODE solvers together with automatic code generation tools to solve complex turbulent reacting flow problems using QSSA models.

chemistry↗

Recent Progress on Numerical Modeling for Microgravity Electric Field Flames: Preprint

This paper presents the recent progress on the NASA Physical Science Informatics (PSI) project PeleLM CFD of Ion Driven Winds from Diffusion Flames in simulating the E-FIELD Flames microgravity results. The focus of this project is to comprehensively simulate the behavior of a small diffusion flame under the influence of an externally applied electric field in zero-gravity. To date, the capability of accurately simulating electric field flames has eluded researchers because the system exhibits dramatic ranges of coupled temporal and spatial scales. Moreover, in earth gravity the hot combustion products are subject to buoyancy effects that are difficult to isolate from those generated by the electric field. This work is an implementation in an existing powerful simulation framework (PeleLM) for this problem using PeleLMeX in order to validate the model and investigate the complex coupled system. The current effort includes establishing the domain of a diffusion coflow burner, examining the boundary conditions, flame geometry and ignition with gravitational forces and also with an electric field applied. A detailed model is used that includes the chemistry of charged ions and chemiluminescent flame intermediates to capture any feedback between ion-driven convection and combustion behavior, and to allow quantitative comparisons with experimental measurements.

coflow flames↗

The Pele Simulation Suite for Reacting Flows at Exascale

In this work, we present the Pele suite of software tools for compressible and incompressible reacting flows. The Pele suite leverages several different libraries, notably AMReX and SUNDIALS, to achieve performance portability on heterogeneous computing architectures across the supercomputing landscape. The Pele suite is comprised of PeleC, a compressible reacting flow block-structured adaptive mesh refinement solver, PeleLMeX, a low-Mach number reacting flow block-structured adaptive mesh refinement solver, Pele-Physics, a library for transport, thermodynamics, finite rate chemistry, soot, spray and radiation physics. The objective of this paper is (i) to present the code development efforts necessary to achieve highly effective and scalable applications for exascale machines and (ii) to detail the performance results of the Combustion-Pele project applications on Oak Ridge National Laboratory's Frontier. We show good weak and strong scaling results for both PeleC and PeleLMeX up to more than 50 billion cells on more than 4096 Frontier graphics processing unit nodes. We also present a capability demonstration simulation of a dual-fuel pulse compression ignition engine (six adaptive mesh refinement levels, and 60 billion cells or 2.1 trillion degrees of freedom) on Frontier, to date one of the largest simulations performed on the first exascale-class supercomputer.

adaptive mesh refinement↗

PeleMP: The Multiphysics Solver for the Combustion Pele Adaptive Mesh Refinement Code Suite

Combustion encompasses multiscale, multiphase reacting flow physics spanning a wide range of scales from the molecular scales, where chemical reactions occur, to the device scales, where the turbulent flow is affected by the geometry of the combustor. This scale disparity and the limited measurement capabilities from experiments make modeling combustion a significant challenge. Recent advancements in high-performance computing (HPC), particularly with the Department of Energy's Exascale Computing Project (ECP), have enabled high-fidelity simulations of practical applications to be performed. The major physics submodels, including chemical reactions, turbulence, sprays, soot, and thermal radiation, exhibit distinctive computational characteristics that need to be examined separately to ensure efficient utilization of computational resources. This paper presents the multiphysics solver for the Pele code suite, called PeleMP, which consists of models for spray, soot, and thermal radiation. Here, the mathematical and algorithmic aspects of the model implementations are described in detail as well as the verification process. The computational performance of these models is benchmarked on multiple supercomputers, including Frontier, an exascale machine. Results are presented from production simulations of a turbulent sooting ethylene flame and a bluff-body swirl stabilized spray flame with sustainable aviation fuels to demonstrate the capability of the Pele codes for modeling practical combustion problems with multiphysics. This work is an important step toward the exascale computing era for high-fidelity combustion simulations providing physical insights and data for predictive modeling of real-world devices.

42 ENGINEERING↗

Adaptive Mesh Refinement Simulations for Turbulent Reacting Flow

With the increased availability of exascale computing hardware, detailed simulations of realistic devices can be performed at practically relevant time and length scales. Insights into the multiscale driving mechanisms in compressible reacting flow systems with complex geometry, such as combustors, can be used for design optimization and technology improvements. However, to effectively perform these simulations, advanced numerical algorithms must be used to maintain solution accuracy without incurring undue computational costs. PeleC, part of the Pele suite of codes, leverages block-structured adaptive mesh refinement (AMR) through the AMReX library to capture fine-scale flow features in compressible reacting flows. In this talk, we discuss recent improvements to the numerical algorithms, particularly in regard to describing flows at complex boundary structures, and PeleC's performance on exascale computing hardware. We will demonstrate that PeleC is well-suited for modern, extreme-scale, heterogenous compute platforms.

combustion↗

DNS of Flame Stabilization Dynamics of a Swirl-Stabilized Spray Burner Using Sustainable Aviation Fuels

Concern for emission reduction has motivated the development of new cost-effective alternative sustainable aviation fuels (SAFs). Drop-in SAFs with blends of the certified and the alternative fuels are beneficial because they do not require engine modifications for use in current aviation engines. Combustion characteristics are of particular concern when comparing a new fuel with Jet-A. Lean blow-off and flame stabilization have been identified to be governed by the fuel propensity to autoignition, i.e. derived cetane number. However, fundamental investigation is required to identify the impact of derived cetane number on the combustion mode of flame stabilization in a realistic combustor. The combustion mode has also a direct impact on turbulent combustion modeling closures. DNS simulations are performed in the low-Mach solver of the Pele Suite called PeleLMeX. Lagrangian multi-phase modeling is used to capture the liquid spray injection of Jet-A (reference fuel) and C1 as a representative of a low cetane number SAF. Adaptive Mesh Refinement (AMR) is used to enable a more efficient simulation of a more realistic domain size and embedded boundary treatment is used to model a bluff-body geometry. Local extinction and edge flame propagation were observed for both fuels. The edge flame propagation mode was quantified in terms of a Damkohler number defined as the ratio between progress variable reaction rate and its diffusive flux. Initial analysis suggests that a mixed mode combustion occurs for the edge flame propagation, with flame propagation assisted by ignition and autoignition co-existing for both Jet-A and C1 flames. The analysis of the extinction region shows a larger progress variable for Jet-A which can further increase the local displacement speed and present a faster reignition of the stoichiometric mixture fraction.

adaptive mesh refinement↗

Experiences Readying Applications for Exascale

The advent of Exascale computing invites an assessment of existing best practices for developing application readiness on the world's largest supercomputers. This work details observations from the last four years in preparing scientific applications to run on the Oak Ridge Leadership Computing Facility's (OLCF) Frontier system. This paper addresses a range of topics in software including programmability, tuning, and portability considerations that are key to moving applications from existing systems to future installations. A set of representative workloads provides case studies for general system and software testing. We evaluate the use of early access systems for development across several generations of hardware. Finally, we discuss how best practices were identified and disseminated to the community through a wide range of activities including user-guides and trainings. We conclude with recommendations for ensuring application readiness on future leadership computing systems.

exascale↗

Experiences readying applications for Exascale

The advent of Exascale computing invites an assessment of existing best practices for developing application readiness on the world's largest supercomputers. This work details observations from the last four years in preparing scientific applications to run on the Oak Ridge Leadership Computing Facility's (OLCF) Frontier system. This paper addresses a range of topics in software including programmability, tuning, and portability considerations that are key to moving applications from existing systems to future installations. A set of representative workloads provides case studies for general system and software testing. We evaluate the use of early access systems for development across several generations of hardware. Finally, we discuss how best practices were identified and disseminated to the community through a wide range of activities including user-guides and trainings. We conclude with recommendations for ensuring application readiness on future leadership computing systems.

Gottiparthi, Kalyan↗

PeleLMeX: an AMR Low Mach Number Reactive Flow Simulation Code without level sub-cycling

PeleLMeX simulates chemically reacting low Mach number flows with block-structured adaptive mesh refinement (AMR). The code is built upon the AMReX library, which provides the underlying data structures and tools to manage and operate on them across massively parallel computing architectures. PeleLMeX algorithmic features are inherited from its predecessor PeleLM but key improvements allow representation of more complex physical processes. Together with its compressible flow counterpart PeleC, the thermo-chemistry library PelePhysics and the multi-physics library PeleMP, it forms the Pele suite of open-source reactive flow simulation codes.

97 MATHEMATICS AND COMPUTING↗

Simulations of Fuel-Air Mixing in a 7 Element Lean Direct Injection (LDI) Aviation Combustor: Preprint

The increased accessibility of commercial aviation to the general population has in-creased the conventional jet fuel consumption, thereby causing increased CO2emissions. One of the strategies to reduce the environmental impact is to use sustainable aviation fuels (SAFs). SAFs are jet fuels obtained from renewable resources such as biomass and waste streams such as plastics/municipal solid wastes. Even though the use of SAFs has been gaining importance over the last two decades, only a few numerical studies on their usage have been reported so far. In this study, two SAFs namely, alcohol to jet (ATJ) and hydrotreated esters and fatty acids (HEFA), are chosen and their use in a simple, lead direct injection (LDI) combustor is studied. The focus of this study is limited to the thermo-chemical properties of the fuels and their impact on fuel distribution and evaporation. Hence, only non-reactive simulations are performed. A high accuracy, adaptive mesh refinement based low-Mach solver, PeleLMeX, is used for performing the simulations. The time-averaged flow results indicate faster evaporation of HEFA when compared to ATJ and Jet-A. The difference in fuel evaporation rates is attributed to the differences in fuel viscosity and surface tension properties and the concomitant variations in the fuel droplet size distributions.

adaptive mesh refinement↗

Simulations of Fuel-Air Mixing in a 7 Element Lean Direct Injection (LDI) Aviation Combustor

The increased accessibility of commercial aviation to the general population has in-creased the conventional jet fuel consumption, thereby causing increased CO2 emissions. One of the strategies to reduce the environmental impact is to use sustainable aviation fuels (SAFs). SAFs are jet fuels obtained from renewable resources such as biomass and waste streams such as plastics/municipal solid wastes. Even though the use of SAFs has been gaining importance over the last two decades, only a few numerical studies on their usage have been reported so far. In this study, two SAFs namely, Alcohol to Jet (ATJ) and Hydrotreated Esters and Fatty Acids (HEFA), are chosen and their use in a simple, Lead Direct Injection (LDI) combustor is studied. The focus of this study is limited to the thermo-chemical properties of the fuels and their impact on fuel distribution and evaporation. Hence, only non-reactive simulations are performed. A high accuracy, adaptive mesh refinement based low-Mach solver, PeleLMeX, is used for performing the simulations. The time-averaged flow results indicate faster evaporation of HEFA when compared to ATJ and Jet-A. The difference in fuel evaporation rates is attributed to the differences in fuel viscosity and surface tension properties and the concomitant variations in the fuel droplet size distributions.

adaptive mesh refinement↗

Examination of a Methane/Diesel RCCI Engine Using Pele: Preprint

Multi-fuel, advanced injection strategies have become increasingly promising as a strategy to mitigate the emissions generated from internal combustion engines. By carefully controlling the combustion phasing in-cylinder, these new multi-pulse, multi-fuel injection strategies are able to burn in the low-temperature combustion regime where both NOx and soot are not readily produced, reducing the need for extensive exhaust gas recirculation systems. In this study, we examine a reactivity-controlled compression ignition (RCCI) strategy that uses an early pre-filled methane-air mixture with low turbulence background as the low-reactivity fuel and a direct injection of four discrete dodecane jets as a surrogate for the high-reactivity diesel fuel. We use the Pele software suite, a highly optimized, exascale-ready, adaptive mesh refinement codebase to perform high-resolution numerical simulations of a scaled down, single cylinder from the RCCI engine. Here, we resolve the ignition kernels down to micrometer scales and present several statistical quantities evaluating the development of the flow and detailing the onset of ignition and subsequent flame development. Particular attention is paid to the conditions surrounding the onset of the first ignition kernels and discussing what led to the development of those conditions.

CFD↗

Direct Numerical Simulation of Flame-Wall Interaction for Low-Carbon Gas Turbine Combustion

Green hydrogen (H2) and ammonia (NH3) are emerging as carbon free alternatives to hydrocarbon fuels. In gas turbines, flames interact with the combustor liner (wall), which affects the pollutant emissions, the burning efficiency, and the thermal load on the liner. We lack understanding of this important flame-wall interaction (FWI) for alternative fuels. FWI occurs at the scale of the flame thickness, and such scales are only resolved by direct numerical simulation. Here, we resolve the FWI for NH3 and H2 flames. Preliminary results of two distinct projects are presented: 2D laminar anchored V-flame, and 3D turbulent swirling flame. For the laminar flame, we show flame quenching at the wall and resulting leakage of NH3 and increased N2O, but decreased NO emissions. For the swirling flame, we show CO emissions, and comparison of flame shapes and location to experimental measurements. Ultimately we show that quenching and pollutant emissions strongly affected by fuel/air ratio, and that an inclined wall can stabilize very lean turbulent CH4/H2 flames, but prone to large CO emissions.

adaptive mesh refinement↗

PELE - Transforming Combustion Science and Technology with Exascale Simulations

This poster presents the status of the Pele Combustion project, an applications project in the Exascale Computing Project. It summarizes the goal of the projects, developments added to the Pele simulation capabilities over the last year, some example performance figures that target ultimate application on the Frontier supercomputer, and show a number of published and in-progress simulation results, by us and our collaborators.

combustion↗

High-Fidelity Simulations of Plasma-Assisted Oxidation of Hydrocarbon Fuels Using Nanosecond Pulsed Discharges

Next, a robust and efficient framework for simulating NSPD in multiple dimensions is developed. The reactive Navier-Stokes equations are extended to include a drift-diffusion plasma-fluid model with a local field approximation (LFA) in a finite-volume solver, which uses an adaptive mesh refinement (AMR) strategy to address the wide separation of length scales in the problem. A two-way coupling strategy is used whereby the plasma-fluid model and reactive Navier-Stokes equations are integrated simultaneously. The oxidation of ethylene/air mixtures mediated by NSPD is simulated in a pin-to-pin configuration. All phases of the plasma discharge are simulated explicitly (including streamer ignition, propagation, and connection, as well as the subsequent spark phase), along with the evolution of the plasma during the inter-pulse period. Temporally and spatially-resolved results are presented, with an emphasis on the analysis of heating and energy deposition, as well as of the evolution of the concentration of active particles generated during the NSPD and their influence on ignition.

adaptive mesh refinement↗