Search NASA⌕ Search

Engineering topics

Etz, Brian D.

Publications and source records attributed to Etz, Brian D..

10 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

A comprehensive experimental and kinetic modeling study of di-isobutylene isomers: Part 2

A wide variety of high temperature experimental data obtained in this study complement the data on the oxidation of the two di-isobutylene isomers presented in Part I and offers a basis for an extensive validation of the kinetic model developed in this study. Due to the increasing importance of unimolecular decomposition reactions in high-temperature combustion, we have investigated the di-isobutylene isomers in high dilution utilizing a pyrolysis microflow reactor and detected radical intermediates and stable products using vacuum ultraviolet (VUV) synchrotron radiation and photoelectron photoion coincidence (PEPICO) spectroscopy. Additional speciation data at oxidative conditions were also recorded utilizing a plug flow reactor at atmospheric pressure in the temperature range 725-1150 K at equivalence ratios of 1.0 and 3.0 and at residence times of 0.35 s and 0.22 s, respectively. Combustion products were analyzed using gas chromatography (GC) and mass spectrometry (MS). Ignition delay time measurements for di-isobutylene were performed at pressures of 15 and 30 bar at equivalence ratios of 0.5, 1.0, and 2.0 diluted in 'air' in the temperature range 900-1400 K using a high-pressure shock-tube facility. New measurements of the laminar burning velocities of di-isobutylene/air flames are also presented. The experiments were performed using the heat flux method at atmospheric pressure and initial temperatures of 298-358 K. Moreover, data consistency was assessed with the help of analysis of the temperature and pressure dependencies of laminar burning velocity measurements, which was interpreted using an empirical power-law expression. Electronic structure calculations were performed to compute the energy barriers to the formation of many of the product species formed. The predictions of the present mechanism were found to be in adequate agreement with the wide variety of experimental measurements performed.

09 BIOMASS FUELS↗
DOE OSTI2022

Chemical Kinetics Underlying the Sooting Tendency and Auto-Ignition Characteristics of Linear, Branched, and Cyclic Ether Compounds

Biofuels present opportunities for improving the performance and reducing emissions from internal combustion engines by incorporating oxygenated functional groups to the fuels. Among various oxygenates, ethers have been recognized as promising candidates for an alternative to conventional diesel fuel owing to their higher reactivity and lower sooting tendency. The detailed guidelines for designing ethers, however, have not been fully discussed, even though their combustion characteristics are sensitive to the molecular structure. This study was devoted to exploring the structure-property relationships, particularly focusing on the cetane number and yield sooting index, using five linear, branched, and cyclic ethers: di-amyl-ether, 4-butoxy-heptane, 3,3-dimethyl-oxetane, 2-ethyl-4-methyl-1,3-dioxolane, and 2-isopropyl-4-methyl-1,3-dioxolane. First, we examined the chemical kinetics underlying the sooting tendency of the test fuels. The combustion product distribution was measured from flow reactor experiments at 750-1100 K, F=3, at atmospheric pressure. As a result, it was revealed that the sooting tendency is closely related to the size of hydrocarbon intermediates in the high-temperature regime (>1000 K); that is, larger hydrocarbons lead to more soot precursor formation. The underlying chemistry determining the size of the hydrocarbons from the tested fuels was analyzed using reaction pathway analysis and quantum mechanics calculations, which showed that the branched and cyclic ether structures form abundant C3-C4 compounds. Moreover, the auto-ignition characteristics of the test fuels were studied using the flow reactor at low-temperature (400-700 K) and F=1. We found a clear difference in the combustion-product distribution from high and low reactivity fuels, which was then correlated to the systematic analysis of the key reaction energy barriers with the varying molecular structure.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗
DOE OSTI2020

Prediction of Hydroxymethylfurfural Yield in Glucose Conversion through Investigation of Lewis Acid and Organic Solvent Effects

Hydroxymethylfurfural (HMF) is one of the important renewable platform compounds that can be obtained from biomass feedstocks through glucose conversion catalyzed by Brønsted and Lewis acids. However, it is challenging to enhance the HMF yield due to side reactions. In this study, a systematic approach combining theory and experiment was performed to investigate the influence of Lewis acids and organic solvents on the HMF yield. For the Lewis acid effect, a relationship between chemical hardness and experimental HMF yields was found in the rate-limiting step of glucose-to-fructose isomerization for six metal chlorides; HMF production was promoted when the metal chloride and a substrate had a similar chemical hardness. To study the organic solvent effect, a multivariate model was developed based on the insights gained from the mechanistic study of fructose dehydration, to predict HMF yields in a given water-organic cosolvent system. It showed a reliable accuracy in evaluating HMF yields with a mean absolute error (MAE) of 3.0% with respect to experimental HMF yields for 13 solvents, and also predicted HMF yields with a MAE of 10.7% for four new solvents. Chemical interpretation of the model revealed that it is desirable to use a solvent capable of stabilizing the carbocation intermediates with low proton transfer activity and high hydrogen bond basicity, to maximize the HMF yield. This multivariate model informs experimentalists about rational selection of solvents with very low computational costs needed to calculate only six variables for each solvent. It can be expanded to other catalytic systems such as heterogeneous Brønsted–Lewis bifunctional catalysts and enables optimization of reaction conditions to obtain other useful platform molecules through biomass conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Understanding how chemical structure affects ignition-delay-time $\phi$-sensitivity

$\phi$-sensitivity is the change in ignition delay time (IDT) with respect to the fuel-to-air equivalence ratio ($\phi$). High $\phi$-sensitivity is a desirable fuel property for applications in advanced compression ignition and multi-mode engine designs. Understanding how $\phi$-sensitivity depends on chemical structure is essential for selecting promising biofuels from the ever-growing list of proposed candidates. Here, we investigate the effect of chemical structure on $\phi$-sensitivity with experiment, simulation, and theory. Experimental Advanced Fuel Ignition Delay Analyzer (AFIDA) measurements for 2,4-dimethylpentane and diisopropyl ether provide evidence that branching and functional groups strongly impact $\phi$-sensitivity. Further insights into this dependence are obtained with 0-D kinetic simulations with existing mechanisms for n-pentane, diethyl ether, 3-pentanone, n-heptane, 2-methylhexane, 2,4-dimethylpentane, and 2,2,3-trimethylbutane. Quantum mechanical (QM) G4 calculations of low-temperature reactions help explain the observed experimental and simulation trends. Specifically, these QM calculations provide theoretical estimates of the ketohydroperoxide (KHP) dissociation rates, the HO 2 formation rates from peroxy radical (ROO), and the “cross-over” temperatures, i.e., the temperature at which ROO dissociation is favored compared to hydroperoxyl radical (QOOH) formation. Each of these reaction rates is compared to the n-alkane reference point to determine the impact of branching and different functional groups. Although kinetic mechanisms typically assume that KHP dissociation rates are invariant of chemical environment, our QM results suggest that this rate can span a range of roughly two orders of magnitude. We also discuss the importance of including the peroxy-hydroperoxy (OO-OOH) hydrogen transfer reaction for branched ethers. Finally, the insights gained assist in proposing a highly $\phi$-sensitive compound, namely, isopropyl propyl ether.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Investigation of structural effects of aromatic compounds on sooting tendency with mechanistic insight into ethylphenol isomers

Small aromatic molecules with oxygen-containing functional groups are a promising class of fuel additives, as they can be readily sourced from depolymerized lignin. These oxygenated aromatic compounds (OACs) show a lower sooting tendency than aromatic hydrocarbons, but OACs having alkyl groups such as ethylphenol show a higher sooting tendency than other OACs such as phenol and anisole, despite the oxygen moiety. In this study, we investigate the relationship between chemical structure and soot precursor formation to explain observed differences in the sooting tendency of OACs and to gain insight into how alkyl or oxygenated substituents on the aromatic ring affect soot precursor formation. The weakest bond for 15 aromatic compounds was identified and cleavage of these bonds was shown to generate either benzyl or phenoxy radicals. A linear relationship between standard enthalpy of formation (ΔH f o ) of these radicals and the yield sooting index (YSI) was found, and thus ΔH f ° can be applied as a metric to estimate YSIs of various aromatic compounds; higher ΔH f o of a radical indicates an increase in the radical reactivity and leads to more soot precursor formation. Flow reactor experiments were performed for 2-ethylphenol and 3-ethylphenol to elucidate how ortho and meta substitution effects the sooting tendency. Soot precursors were identified from the experiment and their formation pathways were investigated computationally. 2-ethylphenol produces more oxygenated products than 3-ethylphenol since the ortho position has increased resonance stabilization of radical intermediates, which leads to lower YSI. Overall, these results further inform the selection of potential biomass-derived fuel blendstocks that have favorable sooting tendencies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Elucidating the Chemical Pathways Responsible for the Sooting Tendency of 1 and 2-phenylethanol

Yield Sooting Index (YSI) measurements have shown that oxygenated aromatic compounds (OACs) tend to have lower YSI than aromatic hydrocarbon (AHC) compounds. For example, typical AHCs such as toluene and ethyl benzene have a YSI of 170 and 216, respectively, in contrast, OACs such as phenol and anisole have a YSI of 81 and 111, respectively. However, this trend is not always true as was observed for the structural isomers 1-phenylethanol (1PE, YSI=142) and 2-phenylethanol (2PE, YSI=207), where 2PE contains a YSI more representative of AHCs than OACs. We applied flow reactor experiments and density functional theory (DFT) calculations to examine how oxygen functionality present in 1PE and 2PE alters the reaction pathways leading to the observed difference in soot formation. It was determined that the proximity of the oxygen functional group to the aromatic ring determines whether the oxygen remains attached to the primary reacting species (for 1PE) or is eliminated early in the combustion sequence (for 2PE). For these alcohols, preservation of the oxygen in the molecule leads to further OACs, while loss of the oxygen leads to AHCs and benzyl radical. The direct pathways to AHCs and benzyl radical result in the higher YSI observed for 2PE.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A Perspective on Biomass-Derived Biofuels: From Catalyst Design Principles to Fuel Properties

The hazards to health and the environment associated with the transportation sector include smog, particulate matter, and greenhouse gas emissions. Conversion of lignocellulosic biomass into biofuels has the potential to provide significant amounts of infrastructure-compatible liquid transportation fuels that reduce those hazardous materials. However, the development of these technologies is inefficient, due to: (i) the lack of a priori fuel property consideration, (ii) poor shared vocabulary between process chemists and fuel engineers, and (iii) modern and future engines operating outside the range of traditional autoignition metrics such as octane or cetane numbers. In this perspective, we describe an approach where we follow a “fuel-property first” design methodology with a sequence of (i) identifying the desirable fuel properties for modern engines, (ii) defining molecules capable of delivering those properties, and (iii) designing catalysts and processes that can produce those molecules from a candidate feedstock in a specific conversion process. Computational techniques need to be leveraged to minimize expenses and experimental efforts on low-promise options. This concept is illustrated with current research information available for biomass conversion to fuels via catalytic fast pyrolysis and hydrotreating; outstanding challenges and research tools necessary for a successful outcome are presented.

BIOMASS FUELS↗