Engineering topics

Euler, J. A.

Publications and source records attributed to Euler, J. A..

4 records

NASA NTRS1992

Collision avoidance of a multiple degree of redundancy manipulator operating through a window

The problem of collision-free operation of a multiple-degree-of-redundancy manipulator operating through a window is addressed. An efficient gradient projection optimization scheme is presented for the kinematic control of manipulators with multiple degrees of redundancy. This scheme was developed for dextrous robotic and telerobotic applications in space station construction as well as in congested shop floor environment. A performance criterion is defined to maximize the shortest distances between the manipulator links and the edges of the window. Effectiveness of this scheme and the validity of the performance criterion are verified through simulations of the seven-degree-of-freedom NASA Laboratory Telerobotic Manipulator.

Zghal, H.↗

NASA NTRS1990

Collision avoidance of a redundant manipulator operating through a window

The problem of collision-free operation of a redundant robot manipulator through a window is addressed. The window is modeled by a polygon with the sides representing the edges of the window. A performance criterion is defined to maximize the shortest distances between the arm link axes and the edges of the window. An efficient gradient projection optimization scheme for the kinematic control of manipulators with multiple degrees of redundancy is developed and used. The effectiveness of this scheme and the validity of the performance criterion are verified through simulations of the seven-degree-of-freedom NASA Laboratory Telerobotic Manipulator (LTM), where controlling only the position of the end-effector provides three degrees of redundancy.

Zghal, H.↗

NASA NTRS1990

Efficient gradient projection optimization for manipulators with multiple degrees of redundancy

An efficient gradient projection optimization scheme is presented for manipulators with multiple degrees of redundancy. This is an extension of the gradient projection scheme presented by Dubey et al. (1989) for manipulators with one degree of redundancy. The feasibility and effectiveness of this scheme are tested through simulations of the seven-degree-of-freedom NASA Laboratory Telerobotic Manipulator (LTM). Only the position of the LTM end effector is controlled, which requires only three degrees of freedom. The remaining joints, except for the wrist roll joint, which does not contribute to the end-effector linear velocity, provide three degrees of redundacy.

Zghal, H.↗

NASA NTRS1989

Robotic control of the seven-degree-of-freedom NASA laboratory telerobotic manipulator

A computationally efficient robotic control scheme for the NASA Laboratory Telerobotic Manipulator (LTM) is presented. This scheme utilizes the redundancy of the seven-degree-of-freedom LTM to avoid joint limits and singularities. An analysis to determine singular configurations is presented. Performance criteria are determined based on the joint limits and singularity analysis. The control scheme is developed in the framework of resolved rate control using the gradient projection method, and it does not require the generalized inverse of the Jacobian. An efficient formulation for determining the joint velocities of the LTM is obtained. This control scheme is well suited for real-time implementation, which is essential if the end-effector trajectory is continuously modified based on sensory feedback. Implementation of this scheme on a Motorola 68020 VME bus-based controller of the LTM is in progress. Simulation results demonstrating the redundancy utilization in the robotic mode are presented.

Dubey, R. V.↗