Evan Roelke | Search NASA

NASA NTRSDate not supplied

Performance Analysis of SmallSat Aerocapture at Venus

Aerocapture is a method of spacecraft orbital insertion that has the potential to provide mass savings as compared to aerobraking. In particular, aerocapture at Venus is desirable due to high atmospheric density and potential for science return. While promising, accurate orbital insertion by means of aerocapture requires an active guidance, navigation, and control architecture. This paper documents the initial assessment of the performance of two guidance algorithms, a generalized numerical predictor corrector and the Fully-Numeric Predictor- corrector for Aerocapture Guidance, applied to smallsat aerocapture at Venus using two different simulation environments with equivalent simulation inputs. Nominal trajectory performance is assessed. In addition, Monte Carlo analysis is performed to compare each guidance algorithm’s performance under uncertainty.

aerocapture↗

NASA NTRSDate not supplied

Performance Analysis of SmallSat Aerocapture at Venus

Aerocapture is a method of spacecraft orbital insertion that has the potential to provide mass savings as compared to aerobraking. In particular, aerocapture at Venus is desirable due to high atmospheric density and potential for science return. While promising, accurate orbital insertion by means of aerocapture requires an active guidance, navigation, and control architecture. This paper documents the initial assessment of the performance of two guidance algorithms, a generalized numerical predictor corrector and the Fully-Numeric Predictor-corrector for Aerocapture Guidance, applied to smallsat aerocapture at Venus using two different simulation environments with equivalent simulation inputs. Nominal trajectory performance is assessed. In addition, Monte Carlo analysis is performed to compare each guidance algorithm’s performance under uncertainty.

aerocapture↗

NASA NTRSDate not supplied

Advanced Supersonic Parachute Inflation Research and Experiment-2 (ASPIRE2) Flight Mechanics Modeling and Simulation

Introduction: The Advanced Supersonic Para-chute Inflation Research Experiment-2 (ASPIRE2) program is a sounding rocket flight test to be conducted at Wallops Island, VA in early 2025. This program is a risk mitigation exercise for the Mars Sample Retrieval Lander (MSRL) program and builds upon the success of the 2017 & 2018 ASPIRE program, [1,2]. While the ASPIRE program certified the strengthened 21.5 m diameter disk-gap-band (DGB) deployed at Mach 1.7, ASPIRE2 will certify a 24 m diameter DGB deployed at Mach 2.1. The need to certify this increased parachute performance is driven the increased lander mass for MSRL; over 50% increase in comparison to M2020. Modeling: Like its predecessor, ASPIRE2 is developing a multi-body flight dynamics simulation to predict parachute dynamics and aide in designing the flight test that will target Mars-relevant flight conditions, as shown in Figure 1. This work de-scribes the parachute modeling, flight mechanics simulations (from payload separation to splash-down), and design trades used to prepare for the 2025 ASPIRE2 flight. Discussed herein are comparisons between ASPIRE and ASPIRE2, noting key differences in the parachute modeling and vehicle configuration. A study on the attitude control system performance impacts with respect to payload section design will also be presented. This work will quantify the pre-flight parachute performance in the presence of uncertainties, such as those associated with the separation from the sounding rocket, atmosphere, the parachute system, and vehicle mass. The pre-flight predictions will include Monte Carlo analyses, powered by the flight mechanics simulations to show the ASPIRE2 vehicle performance in meeting program requirements on parachute deployment conditions (Mach & dynamic pressure), parachute loads, vehicle attitude at key milestones, and the vehicle splashdown conditions.

Entry Descent and Landing↗

NASA NTRSDate not supplied

Advanced Supersonic Parachute Inflation Research Experiment 2 (ASPIRE2) Flight Mechanics and Parachute Performance

The Advanced Supersonic Parachute Inflation Re-search Experiment-2 (ASPIRE2) program consists of a sounding rocket flight test to be launched at Wallops Flight Facility (WFF) in 2025. This effort seeks to qualify the supersonic parachute for the Sample Retrieval Lander (SRL) under the Mars Sample Return (MSR) program, building off the successes of its predecessor program, ASPIRE, which launched in both 2017 and 2018. The conops for the ASPIRE2 mission are shown in Figure 1 relative to its predecessor. While the ASPIRE pro-gram qualified a 21.5 m diameter disk-gap band parachute deployed at Mach 1.7, the SRL parachute will be increased to 24 m in diameter and target a Mach 2.1 parachute deployment condition, the largest diameter supersonic parachute deployed at the highest Mach number to date. These requirements are driven by the increased landing mass of the sample retrieval lander, which is roughly a 50% increase over that of the Mars2020 entry vehicle. These changes necessitate ASPIRE2 to certify the parachute performance under similar deployment conditions. This work will cover the 6-DoF para-chute model implementation and flight mechanics performance for the ASPIRE2 campaign and discuss how these results will impact the design of the test article. The ASPIRE2 trajectory is simulated using a multi-body flight dynamics tool, Program to Optimize Simulated Trajectories II (POST2). This work will summarize both the flight mechanics and parachute modeling (from payload separation until splashdown) and performance for this mission. Various design trades will be assessed such as para-chute tuning parameters as well as vehicle center of gravity location.

Evan Roelke↗

NASA NTRSDate not supplied

Hypersonic Inflatable Aerodynamic Decelerator Earth-based Applications

Hypersonic Inflatable Aerodynamic Decelerators technology has been developed by NASA to enable challenging entry, descent, and landing missions at various planetary destinations. In the last two decades, HIAD technology has been developed through a series of ground tests and flight tests, culminating in the 2022 Low-Earth Orbit Flight Test of an Inflatable Decelerator flight demonstration of a 6 m diameter vehicle from orbital velocities. Past studies have considered application of HIAD for human-scale missions, especially return from the Moon or human-class missions to Mars. However, recent commercial interest in the HIAD technology following LOFTID’s success shows HIAD applications are possible for cislunar return, Earth aerocapture, return from low Earth orbit, and even launch vehicle component recovery. This paper describes the flight performance range for these new, Earth-based applications.

Soumyo Dutta↗

NASA NTRSDate not supplied

Comparative Performance of Entry Simulations using Guided Human-Scale Landers at Mars

There has been ongoing interest in human exploration of Mars since the 1970s. Most studies to date have investigated moderate lift-to-drag ratio vehicles to investigate this problem. This paper considers the development and cross-simulation comparison of a slender-bodied, moderate lift-to-drag human-scale lander vehicle for Mars. The vehicle employs the Fully Numerical Predictor-corrector Entry Guidance to target a powered descent state, subsequently leveraging Fractional Polynomial Powered Descent Guidance laws to reach the desired touchdown target. Differences in simulation environment as well as nominal trajectory results are shared.

Evan Roelke↗

NASA NTRSDate not supplied

Shape Approximation in Camera Fields of View for Parachute Visibility Applications

The ability to simulate camera line of sight and field of view is a powerful capability for flight mechanics simulations. This paper improves upon an existing camera visibility implementation that leverages geometry to estimate parachute visibility from a singular point by introducing a shape discretization method. The new method approximates a shape as a set of analytical points relative to a target marker within any number of camera fields of view. The method is developed in such a way to be generalized to a myriad of spacecraft applications. This effort focuses on an implementation to simulate parachute canopy visibility within the combined field of view of three cameras but additional applications are discussed. Monte Carlo analysis is used to assess the parachute canopy visibility example and demonstrate its improved performance over the previous method.

Evan Roelke↗

NASA NTRSDate not supplied

Advanced Supersonic Parachute Inflation Research Experiment-2 (ASPIRE2) Parachute Modeling and Flight Mechanics Performance

The Advanced Supersonic Parachute Inflation Research Experiment-2 (ASPIRE2) program is designed to test and qualify the supersonic parachute for the Mars entry, descent, and landing stage of the Mars Sample Return campaign. The ASPIRE2 test was planned for early 2026 and would have involved testing the parachute at deployments of Mach 2.1 and higher load conditions than previous Mars missions. The ASPIRE2 simulation builds upon a previous test framework from the ASPIRE tests in 2017-2018 used to qualify the Mars 2020 parachute, but due to new requirements, the modeling and simulation for ASPIRE2 has needed development and characterization of different sensitivities. This paper looks at the mission design as of mid-2024 and presents the trade space for qualifying the parachute in a dynamic environment.

Evan Roelke↗

NASA NTRSDate not supplied

Hypersonic Inflatable Aerodynamic Decelerator Earth-based Applications

Hypersonic Inflatable Aerodynamic Decelerators technology has been developed by NASA to enable challenging entry, descent, and landing missions at various planetary destinations. In the last two decades, HIAD technology has been developed through a series of ground tests and flight tests, culminating in the 2022 Low-Earth Orbit Flight Test of an Inflatable Decelerator flight demonstration of a 6 m diameter vehicle from orbital velocities. Past studies have considered application of HIAD for human-scale missions, especially return from the Moon or human-class missions to Mars. However, recent commercial interest in the HIAD technology following LOFTID’s success shows HIAD applications are possible for cislunar return, Earth aerocapture, return from low Earth orbit, and even launch vehicle component recovery. This paper describes the flight performance range for these new, Earth-based applications.

Soumyo Dutta↗

NASA NTRSDate not supplied

Advanced Supersonic Parachute Inflation Research Experiment-2 (ASPIRE2) Parachute Modeling and Flight Mechanics Performance

The Advanced Supersonic Parachute Inflation Research Experiment-2 (ASPIRE2) program is designed to test and qualify the supersonic parachute for the Mars entry, descent, and landing stage of the Mars Sample Return campaign. The ASPIRE2 test was planned for early 2026 and would have involved testing the parachute at deployments of Mach 2.1 and higher load conditions than previous Mars missions. The ASPIRE2 simulation builds upon a previous test framework from the ASPIRE tests in 2017-2018 used to qualify the Mars 2020 parachute, but due to new requirements, the modeling and simulation for ASPIRE2 has needed development and characterization of different sensitivities. This paper looks at the mission design as of mid-2024 and presents the trade space for qualifying the parachute in a dynamic environment.

Evan Roelke↗

NASA NTRSDate not supplied

Shape Approximation in Camera Fields of View for Parachute Visibility Applications

The ability to simulate camera line of sight and field of view is a powerful capability for flight mechanics simulations. This paper improves upon an existing camera visibility implementation that leverages geometry to estimate parachute visibility from a singular point by introducing a shape discretization method. The new method approximates a shape as a set of analytical points relative to a target marker within any number of camera fields of view. The method is developed in such a way to be generalized to a myriad of spacecraft applications. This effort focuses on an implementation to simulate parachute canopy visibility within the combined field of view of three cameras but additional applications are discussed. Monte Carlo analysis is used to assess the parachute canopy visibility example and demonstrate its improved performance over the previous method.

Evan Roelke↗

NASA NTRSDate not supplied

Comparative Performance of Entry Simulations using Guided Human-Scale Landers at Mars

There has been ongoing interest in human exploration of Mars since the 1970s. Most studies to date have investigated moderate lift-to-drag ratio vehicles to investigate this problem. This paper considers the development and cross-simulation comparison of a slender-bodied, moderate lift-to-drag human-scale lander vehicle for Mars. The vehicle employs the Fully Numerical Predictor-corrector Entry Guidance to target a powered descent state, subsequently leveraging Fractional Polynomial Powered Descent Guidance laws to reach the desired touchdown target. Differences in simulation environment as well as nominal trajectory results are shared.

Evan Roelke↗