Search NASA⌕ Search

Engineering topics

Eversman, W.

Publications and source records attributed to Eversman, W..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Prediction of two-dimensional sound propagation over an arbitrarily-shaped barrier using the boundary element method

2D sound propagation over an arbitrarily-shaped barrier situated on a locally reacting infinite plane in a homogeneous medium is treated utilizing the BEM. The BIE is formulated so that the integral along an infinite homogeneous plane disappears if the half space Green's function is selected to satisfy the boundary condition of this plane. Comparison of the BEM results with test results by Habault and by Kearns shows good agreement of the sound field utilizing the BEM.

Park, Jong M.↗
NASA NTRS1990

Two dimensional sound propagation over a ridge

The sound propagation over an arbitrarily-shaped ridge situated on an infinite plane is treated using the Boundary Element Method, for which the Helmholtz integral equation in two-dimensional half space is formulated. A previously developed computational scheme for the acoustic problem at wave length shorther than the characteristic dimension of the radiator or scatterer is applied to the propagation of relatively low frequency sound over large terrain features. The numerical results using the Boundary Element Method are compared to those using algorithms for the Matched Asymptotic Expansion technique.

Eversman, W.↗
NASA NTRS1990

Two-dimensional radiation and scattering at short wave length

In the present investigation of radiation and scattering by objects when the wavelengths are much smaller than the characteristic dimensions of the radiator or scatterer, the boundary-element method is used to obtain computational accuracy and efficiency. The approach employed for wavelengths less than 5 percent of object characteristic dimensions involves cubic elements, approximate polynomial and asymptotic evaluations of the fundamental solution, and a tailoring of the order of the Gaussian quadrature according to the local demands dictated by the distance between sending and receiving points. The method addresses the propagation of low-frequency sound over large terrain features.

Yoon, W. S.↗
NASA NTRS1986

A comparison of the structureborne and airborne paths for propfan interior noise

A comparison is made between the relative levels of aircraft interior noise related to structureborne and airborne paths for the same propeller source. A simple, but physically meaningful, model of the structure treats the fuselage interior as a rectangular cavity with five rigid walls. The sixth wall, the fuselage sidewall, is a stiffened panel. The wing is modeled as a simple beam carried into the fuselage by a large discrete stiffener representing the carry-through structure. The fuselage interior is represented by analytically-derived acoustic cavity modes and the entire structure is represented by structural modes derived from a finite element model. The noise source for structureborne noise is the unsteady lift generation on the wing due to the rotating trailing vortex system of the propeller. The airborne noise source is the acoustic field created by a propeller model consistent with the vortex representation. Comparisons are made on the basis of interior noise over a range of propeller rotational frequencies at a fixed thrust.

Eversman, W.↗
NASA NTRS1986

Modeling the effects of wind tunnel wall absorption on the acoustic radiation characteristics of propellers

Finite element theory is used to calculate the acoustic field of a propeller in a soft walled circular wind tunnel and to compare the radiation patterns to the same propeller in free space. Parametric solutions are present for a "Gutin" propeller for a variety of flow Mach numbers, admittance values at the wall, microphone position locations, and propeller to duct radius ratios. Wind tunnel boundary layer is not included in this analysis. For wall admittance nearly equal to the characteristic value of free space, the free field and ducted propeller models agree in pressure level and directionality. In addition, the need for experimentally mapping the acoustic field is discussed.

Baumeister, K. J.↗
NASA NTRS1986

A comparison of the structureborne and airborne paths for propfan interior noise

In the present comparative study of aircraft interior noise levels due to airborne and structureborne paths for a given propeller source, a structure model is used that treats the fuselage interior as a rectangular cavity with five rigid walls; the sixth, or fuselage sidewall, is a stiffened panel. The wing is modeled as a simple beam carried into the fuselage by a large, discrete stiffener representing the carry-through structure. Comparisons are made on the basis of interior noise over a range of propeller rotational frequencies at a fixed thrust. It is found that the relative importance of the structural and airborne paths is highly dependent on the structural parameters.

Eversman, W.↗
NASA NTRS1986

Modeling the effects of wind tunnel wall absorption on the acoustic radiation characteristics of propellers

Finite element theory is used to calculate the acoustic field of a propeller in a soft walled circular wind tunnel and to compare the radiation patterns to the same propeller in free space. Parametric solutions are present for a 'Gutin' propeller for a variety of flow Mach numbers, admittance values at the wall, microphone position locations, and propeller to duct radius ratios. Wind tunnel boundary layer is not included in this analysis. For wall admittance nearly equal to the characteristic value of free space, the free field and ducted propeller models agree in pressure level and directionality. In addition, the need for experimentally mapping the acoustic field is discussed.

Baumeister, K. J.↗
NASA NTRS1986

A numerical model of acoustic choking. II - Shocked solutions

The one dimensional equations of gas dynamics are used to model subsonic acoustic choking. This model can accommodate non-linear distortion of waves and the eventual formation of shock waves. Several finite differencing schemes are adapted to obtain solutions. The results obtained with the various schemes are compared with the asymptotic results available. The results suggest that no one finite differencing scheme gives solutions significantly better than the others and that most of the difference solutions are close to the asymptotic results. If the acoustic shock wave is sufficiently strong it almost annihilates the acoustic wave; in this situation numerical errors may dominate the results. Such solutions involve very large acoustic attenuations.

Walkington, N. J.↗
NASA NTRS1986

Fundamental investigations of the finite element solutions for acoustic propagation in ducts

The question of convergence of three finite element algorithms for the modelling of acoustic transmission in ducts carrying a nonuniform mean flow is addressed. The details of each algorithm are stated and example calculations in uniform and nonuniform ducts are made and assessed for accuracy and convergence. The algorithm based on the assumption of irrotationality is found to be highly convergent. This algorithm is the one used in current turbo-fan inlet acoustic radiation codes. A theoretical analysis indicating convergence is supported by example calculations. Two additional algorithms which do not require irrotationality are found to be less convergent, and perhaps not convergent at all for certain severely sheared velocity profiles. No theoretical convergence criteria can presently be established for these algorithms and convergence difficulties are shown here by example. Included in this class of algorithms is the duct analysis program ADAM which is known to display apparently nonconvergent solutions in certain cases.

Walkington, N. J.↗
NASA NTRS1985

Fundamental studies of structure borne noise for advanced turboprop applications

The transmission of sound generated by wing-mounted, advanced turboprop engines into the cabin interior via structural paths is considered. The structural model employed is a beam representation of the wing box carried into the fuselage via a representative frame type of carry through structure. The structure for the cabin cavity is a stiffened shell of rectangular or cylindrical geometry. The structure is modelled using a finite element formulation and the acoustic cavity is modelled using an analytical representation appropriate for the geometry. The structural and acoustic models are coupled by the use of hard wall cavity modes for the interior and vacuum structural modes for the shell. The coupling is accomplished using a combination of analytical and finite element models. The advantage is the substantial reduction in dimensionality achieved by modelling the interior analytically. The mathematical model for the interior noise problem is demonstrated with a simple plate/cavity system which has all of the features of the fuselage interior noise problem.

Eversman, W.↗
NASA NTRS1985

Contributions to the finite element solution of the fan noise radiation problem

The radiation of fan generated noise to the far field from a nacelle of realistic geometry is investigated using the finite element method. Several innovations have been introduced to minimize the computational requirements and create a highly efficient numerical scheme. The innovations include: (1) formulation of the problem in terms of velocity potential and density in such a way that no inlet mean flow velocity derivatives are required in the field equations, (2) the use of 'wave envelope' elements in an outer region permitting a grid much coarser than would be used for conventional finite elements, (3) the use of a mesh which deforms with an increase of forward flight speed so that mesh lines are always lines of constant phase and rays for a point source, permitting the use of wave envelope elements and simple boundary conditions for any case of forward velocity, (4) an efficient scheme for introducing the noise source via modal amplitude coefficients, and (5) the use of a frontal solution technique which for physically realistic problems drastically reduces the active storage requirements. The finite element scheme is outlined, as are the specific details of the innovations. Results are given for cases where comparable experimental data are available.

Eversman, W.↗
NASA NTRS1984

Applications of finite element and wave envelope element approximations to turbofan engine noise radiation including flight effects

The problem of acoustic radiation from turbofan engine inlets in flow has not lent itself fully to analysis by numerical means because of the large domains and high frequencies involved. The current work has extended the use of finite elements and wave envelope elements, elements which simulate decay and wavelike behaviour in their interpolation functions, from the no-flow case in which they have been proven, to cases incorporating mean flow. By employing an irrotational mean flow assumption, the acoustics problem has been posed in an axisymmetric formulation in terms of acoustic velocity potential, thus minimizing computer solution storage requirements. The results obtained from the numerical procedures agree well with known analytical solutions, static experimental jet engines inflow data, and also with flight test results.

Parrett, A. V.↗
NASA NTRS1984

Modelling of wind tunnel wall effects on the radiation characteristics of acoustic sources

It is pointed out that the relatively high fuel economy available from propeller-driven aircraft has renewed interest in high speed, highly loaded multiple blade turboprop propulsion systems. Undesirable features related to community noise and the high intensity cabin noise have stimulated new research on the acoustic characteristics of turboprops. The present investigation has the objective to develop a mathematical model of the essential features of the radiation of acoustic disturbances from propellers in a duct and in free space in order to quantify the success with which duct testing can be expected to approximate free field conditions. In connection with the importance of source directionality, a detailed model is considered which consists of a finite element representation of the Gutin propeller theory valid in both the near and far field.

Eversman, W.↗
NASA NTRS1984

A flight study of tone radiation patterns generated by inlet rods in a small turbofan engine

This paper presents a flight study of tone radiation patterns from a small turbofan engine and compares results with similar static test stand data and a recently developed radiation theory. An interaction tone was produced by a circumferential array of inlet rods placed just upstream of the fan blades. Overhead and sideline flight directivity patterns showed cut-on of a dominant single mode occurred where predicted and the absence of any other significant circumferential or radial modes. In general, good agreement was found between measured flight and static data, with small differences being attributed to inlet geometry and/or forward speed effects. Good agreement was also obtained between flight data and theory for directivity pattern shape, however, the theory consistently predicted higher values for peak radiation angle over a wide range of frequency.

Preisser, J. S.↗