Engineering topics

Fagents, Sarah A.

Publications and source records attributed to Fagents, Sarah A..

9 records

NASA NTRS2017

A Volume Flux Approach to Cryolava Dome Emplacement on Europa

We previously modeled a subset of domes on Europa with morphologies consistent with emplacement by viscous extrusions of cryolava. These models assumed instantaneous emplacement of a fixed volume of fluid onto the surface, followed by relaxation to form domes. However, this approach only allowed for the investigation of late-stage eruptive processes far from the vent and provided little insight into how cryolavas arrived at the surface. Consideration of dome emplacement as cryolavas erupt at the surface is therefore pertinent. A volume flux approach, in which lava erupts from the vent at a constant rate, was successfully applied to the formation of steep-sided volcanic domes on Venus. These domes are believed to have formed in the same manner as candi-date cryolava domes on Europa. In order to gain a more complete understanding of the potential for the emplacement of Europa domes via extrusive volcanism, we have applied this new volume flux approach to the formation of putative cryovolcanic domes on Europa. Assuming as in that europan cryolavas are briny, aqueous solutions which may or may not contain some ice crystal fraction, we present the results of this modeling and explore theories for the formation of low-albedo moats that surround some domes.

Cryolava Dome Emplacement↗

NASA NTRS2014

The Influence of Slope Breaks on Lava Flow Surface Disruption

Changes in the underlying slope of a lava flow impart a significant fraction of rotational energy beyond the slope break. The eddies, circulation and vortices caused by this rotational energy can disrupt the flow surface, having a significant impact on heat loss and thus the distance the flow can travel. A basic mechanics model is used to compute the rotational energy caused by a slope change. The gain in rotational energy is deposited into an eddy of radius R whose energy is dissipated as it travels downstream. A model of eddy friction with the ambient lava is used to compute the time-rate of energy dissipation. The key parameter of the dissipation rate is shown to be rho R(sup 2/)mu, where ρ is the lava density and mu is the viscosity, which can vary by orders of magnitude for different flows. The potential spatial disruption of the lava flow surface is investigated by introducing steady-state models for the main flow beyond the steepening slope break. One model applies to slow-moving flows with both gravity and pressure as the driving forces. The other model applies to fast-moving, low-viscosity, turbulent flows. These models provide the flow velocity that establishes the downstream transport distance of disrupting eddies before they dissipate. The potential influence of slope breaks is discussed in connection with field studies of lava flows from the 1801 Hualalai and 1823 Keaiwa Kilauea, Hawaii, and 2004 Etna eruptions.

disruption↗

NASA NTRS2012

Photogrammetric and Global Positioning System Measurements of Active Pahoehoe Lava Lobe Emplacement on Kilauea, Hawaii

Basalt is the most common rock type on the surface of terrestrial bodies throughout the solar system and -- by total volume and areal coverage -- pahoehoe flows are the most abundant form of basaltic lava in subaerial and submarine environments on Earth. A detailed understanding of pahoehoe emplacement processes is necessary for developing accurate models of flow field development, assessing hazards associated with active lava flows, and interpreting the significance of lava flow morphology on Earth and other planetary bodies. Here, we examine the active emplacement of pahoehoe lobes along the margins of the Hook Flow from Pu'u 'O'o on Kilauea, Hawaii. Topographic data were acquired between 21 and 23 February 2006 using stereo-imaging and differential global positing system (DGPS) measurements. During this time, the average discharge rate for the Hook Flow was 0.01-0.05 cubic m/s. Using stereogrammetric point clouds and interpolated digital terrain models (DTMs), active flow fronts were digitized at 1 minute intervals. These areal spreading maps show that the lava lobe grew by a series of breakouts tha t broadly fit into two categories: narrow (0.2-0.6 m-wide) toes that grew preferentially down-slope, and broad (1.4-3.5 m-wide) breakouts that formed along the sides of the lobe, nearly perpendicular to the down-flow axis. These lobes inflated to half of their final thickness within approx 5 minutes, with a rate of inflation that generally deceased with time. Through a combination of down-slope and cross-slope breakouts, lobes developed a parabolic cross-sectional shape within tens of minutes. We also observed that while the average local discharge rate for the lobe was generally constant at 0.0064 +/- 0.0019 cubic m/s, there was a 2 to 6 fold increase in the areal coverage rate every 4.1 +/- 0.6 minutes. We attribute this periodicity to the time required for the dynamic pressurization of the liquid core of the lava lobe to exceed the cooling-induced strength of the lobe margins. Using DGPS-derived DTMs of the topography before and after pahoehoe lobe emplacement, we observed that the lava typically concentrated within existing topographic lows, with the lobe reaching a maximum thickness of approx 1.2 m above the lowest points of the initial topography and above reverse-facing slopes. Lobe margins were typically controlled by high-standing topography, with the zone directly adjacent to the final flow margin having average relief that is approx 4 cm higher than the lava-inundated region. This suggests that irregularities approx 25% of the height of the smallest breakout elements (i.e., toes) can exert a strong control on the paths of low-discharge pahoehoe lobes, with stagnated toes forming confining margins that allow interior portions of flow to topographically invert the landscape by inflation.

Hamilton, Christopher W.↗

NASA NTRS2009

A Hybrid Model for Leveed Lava Flows: Implications for Eruption Styles on Mars

Many cehannelized lava flows on the plains of Mars have substantial embanking margins and levees inferred to have been stationary while the central channel was active. Levee formation can be attributed to two end-member processes during emplacement; construction during passage of the flow front and growth along the entire length of the flow while it is active. It is shown here that the amount of lava that can be deposited by the flow front alone is limited. Estimates of the levee volume for many Mars plains flows exceed this limit and must have formed by processes that continued after the passage of the front. Experimental studies of analogous laboratory flows also indicate a combination of both modes of emplacement. A model that combines both modes of levee formation. is presented, including a method for estimating volumetric flow rate, eruption duration, and viscosity. Six lava flows on the plains of the Tharsis volcanic province are used as illustrative examples. Crustal thicknesses for the six flows examined range from 9 to 23 m. Estimated emplacement times required to cool crusts of these thicknesses range from I year to 10 years. Correspondini viscosities are on the order of 10 5-106 Pa s. Effusion rates range from 25 to 840 m 3 s - and are all within the range of terrestrial observations. Therefore, the large leveed plains flows on Mars are not dramatically different in eruption rate or lava viscosity from large terrestrial analogs.

Glaze, Lori S.↗

NASA NTRS2003

Jupiter System Data Analysis Program: Mechanisms, Manifestation, and Implications of Cryomagmatism on Europa

The objectives of the work completed under NASA Grant NAG5-8898 were (i) to document and characterize the low-albedo diffuse surfaces associated with triple bands and lenticulae, (ii) to determine their mechanisms of formation, and (iii) to assess the implications of these features for the resurfacing (in space and time) of the Europa and the nature of the Europan interior. The approach involved a combination of processing and analysis of Solid State Imaging data returned by the Galileo spacecraft during the primary and extended mission phases, together with numerical modeling of the physical processes interpreted to the observed features. We have modeled the formation of Europan triple explosive venting of cryoclastic material from bands and lenticulae halos by two processes: (i) a liquid layer in the Europan interior, and (ii) lag deposit formation by the thermal influence of subsurface cryomagmatic intrusions. We favor the latter hypothesis for explaining these features, and further suggest that a liquid water or brine intrusion is required to provide sufficient lateral heating of surface ice to explain the 25 km size of the largest features. (Solid ice diapirs, even under the most favorable conditions, become thermally exhausted before they heat significant lateral distances). We argue that water circulating in open fractures, or repeated cryomagmatic 'diking' events would provide sufficient thermal input to produce the observed features. Thus our work argues for the existence of a liquid beneath Europa's surface. Our results might most easily be explained by the presence of a continuous liquid layer (the putative Europan ocean); this would concur with the findings of the Galileo magnetometer team. However, we cannot rule out the possibility that discrete liquid pockets provide injections of fluid closer to the surface.

Fagents, Sarah A.↗

NASA NTRS2003

Icelandic Pseudocraters as Analogs to some Volcanic Cones on Mars

Pseudocraters are rootless vents formed by the interaction of lava flows with surface or near-surface water. This interaction can produce mild explosions and the accumulation of scoria and spatter into small constructs. Pseudocraters in several localities in Iceland were examined in the field and compared to similar appearing features observed on Mars. The Icelandic pseudocrater cones in this study range in size from 6 to 70 m in diameter, have summit craters which range from 2 to 28 m in diameter (many cones lack craters entirely), and have flanks that am either concave- up or convex-up. The size and spacing of Icelandic pseudo-craters might be a function of the availability of water, in which larger, closely spaced features result from efficient lava-water interaction, as suggested by the environments in which the features formed. Possible Martian pseudocrater cones in Amamnis Planitia range in diameter from 30 to 180 m and have craters 12 to 80 m in diameter. A numerical model for volcanic explosions was adapted to study the formation of pseudocraters under terrestrial and Martian conditions. The results suggest that explosions forming Martian cones require significantly less water (calculated masses am less by a factor of 4 to 16) than those forming Icelandic pseudokers, despite their larger sizes, This is attributed to the low gravity and atmospheric pressure in the Mars environment and is consistent with the likely lower abundance of water, which might be present as interstitial ice at shallow depths in the regolith. Locations of potential pseudocraters on Mars at latitudes as low as approximately 8 degrees N, imply the presence of crustal ice stores at the time of their formation.

Greeley, Ronald↗

NASA NTRS2003

A Reassessment of the Emplacement and Erosional Potential of Turbulent, Low-Viscosity Lavas on the Moon

We have reevaluated the role of thermal erosion by low-viscosity lunar lavas as a mechanism or the formation of the lunar sinuous rilles. We have adapted the model of Williams et aL and used the compositions of an Apollo 12 basalt and a terrestrial komatiitic basalt to investigate the compositional and environmental effects on the flow behavior of low-viscosity lavas on the Moon and Earth. Our model predict that lunar lava could have erupted as turbulent flows that were capable of flowing hundreds of kilometers on a sufficiently flat, unobstructed substrate. These results are consistent with previous studies. Modeling of lava over a substrate of the same composition shows that thermal erosion rates would have been low (approx. 10 cm/d). As a result, long-duration eruptions (approximately months to years) would have been required to incise deep (tens to hundreds of meters) channels. Partial melting and mechanical removal of the substrate, a mechanism suggested by Hulme to enhance erosion, only slightly increases thermal erosion rules. Other factors, such as higher flow rates or lava superheating, could have produced deep rilles by thermal erosion during shorter-duration eruption. A superheated lunar lava not only would have had a higher erosion rate (approx. 40 cm/d) but also would have remained uncrusted for tens of kilometers, which is consistent with the open channel morphology of most sinuous rilles. For lunar lavas with large volatile (t.e., vesicle) contents, the presence of vesicles would have tended to increase viscosity at low strain rates, resulting in shorter turbulent flow distances, lower thermal erosion rates, and thus shallower erosion channel depths for given eruption durations.

William, David A.↗

NASA NTRS2002

Mars Global Surveyor Data Analysis Program. Origins of Small Volcanic Cones: Eruption Mechanisms and Implications for Water on Mars

The goal of the proposed work was to determine the origins of small volcanic cones observed in Mars Global Surveyor (MGS) data, and their implications for regolith ice stores and magma volatile contents. For this 1-year study, our approach involved a combination of: Quantitative morphologic analysis and interpretation of Mars Orbiter Camera (MOC) and Mars Orbiter Laser Altimeter (MOLA) data; Numerical modeling of eruption processes responsible for producing the observed features; Fieldwork on terrestrial analogs in Iceland. Following this approach, this study succeeded in furthering our understanding of (i) the spatial and temporal distribution of near-surface water ice, as defined by the distribution and sizes of rootless volcanic cones ("pseudocraters"), and (ii) the properties, eruption conditions, and volatile contents of magmas producing primary vent cones.

Fagents, Sarah A.↗

NASA NTRS2000

Volcanism on the Red Planet: Mars

Of all the planets in the Solar System, Mars is the most Earthlike in its geological characteristics. Like Earth, it has been subjected to exogenic processes, such as impact cratesing and erosion by wind and water, as well as endogenic processes, including tectonic deformation of the crust and volcanism. The effects of these processes are amply demonstrated by the great variety of surface features, including impact craters, landslides, former river channels, sand dunes, and the largest volcanoes in the Solar System. Some of these features suggest substantial changes in Mars' environment during its history. For example, as reviewed by Carr, today Mars is a cold, dry desert with an average atmospheric pressure of only 5.6 mbar which does not allow liquid water to exist on the surface. To some planetary scientists, the presence of the channels bespeaks a time when Mars was warmer and wetter. However, others have argued that these features might have formed under current conditions and that there might not have been a shift in climate. Could the morphology of volcanoes and related features provide clues to past Martian environments? What role is played by atmospheric density in the styles of eruptions on Mars and resulting landforms? If these and related questions can be answered, then we may have a means for assessing the conditions on Mars' surface in the past and comparing the results with models of Martian evolution. In this chapter, we outline the sources of information available for volcanism on Mars, explore the influence of the Martian environment on volcanic processes, and describe the principal volcanic features and their implications for understanding the general evolution of the Martian surface.

Greeley, Ronald↗