Search NASA⌕ Search

Engineering topics

Fang, Hong

Publications and source records attributed to Fang, Hong.

At least 37 records · Page 2

Enhancing Superionic Conductivity in Cluster-Based Sodium-Rich Antiperovskites

Sodium (Na) superionic conductors are the key to developing next-generation solid-state batteries with safety and low cost. However, most of the known Na-conductors exhibit limited ionic conductivities at room temperature (RT), hindering their practical applications. To meet the challenge, a series of Li- and Na-rich antiperovskite superionic conductors based on cluster ions (e.g. BH4- and BCl4-) have been theoretically developed [e.g. Fang et al. PNAS 114, 11046, 2017; ACS App. Mat. Inter. 11, 963, 2018]. These materials exhibit superior properties as solid electrolytes with greatly enhanced ionic conductivities at RT. One cluster-based solid electrolyte of such, Na3O(BH)4, has been successfully synthesized for the first time most recently and its measured RT ionic conductivity is well above 10-3 S/cm which is four orders of magnitude higher than that of its halogen counterparts Na3OX (X = Cl, Br, I) [Sun et al. J. Am. Chem. Soc. 141, 5640, 2019]. In this work, we aim to further enhance the ionic conductivity of the Na-superionic conductor by using chemical mixing according to the size effect. The study further shows the advantage of utilizing cluster ions as building blocks, introducing additional degrees of freedom into tuning the properties of superionic conductors.

Fang, Hong↗

Record-high stability and compactness of multiply-charged clusters aided by selected terminal groups

Multiply-charged clusters with compact sizes that are stable in the gas phase are important due to their potential applications as weakly-coordinating ions and building blocks of bulk materials. However, the number of these clusters, especially those with high charge states beyond two, is limited. In this work, we show that gas-phase di- and tri-anions with record-high stability and compactness can be developed by utilizing a series of stable mono-anions with linear configurations as ligands. A stable di-anion with a record-high second electron binding energy of 6.26 eV and the smallest tri-anion with a record-low radius of 4.85 Å have been identified. This study demonstrates that multiply-charged clusters with highly charged state and compact sizes can be stabilized solely by selected terminal groups in the structure. This finding significantly enriches the database of stable multiply-charged gas-phase clusters and provides a path towards rational design of further multiply-charged species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Boronated holey graphene: a case of 2D ferromagnetic metal

In search of new candidates for two-dimensional ferromagnets, we consider boronated monolayer holey graphene (C 2 B), akin to recently synthesized and extensively studied nitrogenated monolayer holey graphene (C 2 N). In contrast to C 2 N which is semiconducting and nonmagnetic, our first-principles calculations show that C 2 B is metallic and ferromagnetic. The microscopic origin of this interesting behavior is found to be related to the hole doping of π–π* network of C–B which produces metallicity while the unpaired electron on the dangling bond of sp 2 hybridized state of two-coordinated B produces magnetism. Calculated cohesive energy of boronated holey graphene indicates that the formation of this structure is energetically feasible as is the case with its nitrogenated counterpart. The dynamic and thermal stability of the predicted boronated holey graphene are checked in terms of phonon calculations and finite temperature molecular dynamics simulations. We further investigate the electronic and magnetic properties of embedded transition-metal single atom and pairs on C 2 B and C 2 N structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stable Tetra‐ and Penta‐Anions in the Gas Phase

Abstract The quest for stable gas‐phase anions in highly negative charge states has been a great challenge. While multiply charged anions are stabilized in solids and liquids by compensating cations and solvation cells, respectively, stable anions containing less than a hundred atoms in the gas phase and capable of carrying charge beyond −3 is unknown. Here, we report the discovery of thermodynamically stable tetra‐ and penta‐anions, containing less than 50 and 80 atoms, respectively, in the gas phase. A universal model is developed that explains their stability in terms of the synergy between closed shell, high electron affinity, and size and predicts new highly‐charged anions by using the known charged clusters as building blocks. Synthesis of these species can open a new chapter in materials chemistry.

Fang, Hong↗

Stable Tetra- and Penta-Anions in the Gas Phase

The quest for stable gas-phase anions in highly negative charge states has been a great challenge. While multiply charged anions are stabilized in solids and liquids by compensating cations and solvation cells, respectively, stable anions containing less than a hundred atoms in the gas phase and capable of carrying charge beyond -3 is unknown. We report the discovery of thermodynamically stable tetra- and penta-anions, containing less than 50 and 80 atoms, respectively, in the gas phase. A universal model is developed that explains their stability in terms of the synergy between closed shell, high electron affinity, and size and predicts new highly-charged anions by using the known charged clusters as building blocks. Synthesis of these species can open a new chapter in materials chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Performance evaluation of a metamaterial-based new cool roof using improved Roof Thermal Transfer Value model

A new cool roof with potential to generate significant energy savings in buildings has been developed from a metamaterial film named as RadiCold. Considering that the RadiCold film has unique optical and thermal characteristics and the current Roof Thermal Transfer Value model neglecting the effect of roof thermal mass that may lead to overestimating the cooling load from roofs, this work developed an improved Roof Thermal Transfer Value model and validated the model for both RadiCold cool roof and traditional roofing structures. Data from the reduced-size model building experiments showed that the improved Roof Thermal Transfer Value model can accurately describe the heat gains or losses via the roofs. Under real-world weather conditions in the United States (Tucson AZ, Los Angeles, CA, and Orlando FL), the improved Roof Thermal Transfer Value model has been applied to three types of roof exterior finishing: shingle, Thermoplastic Polyolefin (a cool roof material) and RadiCold. In a typical meteorology year, the modeling results show that the shingle and Thermoplastic Polyolefin roof transfer 78.9–294.1 kWh/(m 2 ·yr) and 8.5–128.2 kWh/(m 2 ·yr) of heat into the building space, respectively, but the RadiCold cool roof dissipates 137.6–268.7 kWh/(m 2 ·yr) of heat from the building space to outdoor environment (e.g., sky). The cooling load reduction from utilizing RadiCold cool roof results in cooling electricity savings of 113.0–143.9 kWh/(m 2 ·yr) compared to the shingle roof and 88.0–92.4 kWh/(m2·yr) compared to the Thermoplastic Polyolefin roof for the three analyzed locations with an assumed air conditioning system’s coefficient of performance of 3.0.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Mechanistic Insight into Photocatalytic Pathways of MIL-100(Fe)/TiO 2 Composites

The integration of metal organic frameworks (MOFs) with semiconductors has attracted mounting attention for photocatalytic applications. However, more efforts are needed to unravel the interface structure in MOF/semiconductor composites and its role in charge transfer. In this paper, a MIL-100(Fe)/TiO 2 composite was synthesized as a prototypical photocatalyst and studied systematically to explore the interface structure and unravel the charge transfer pathways during the photocatalytic processes. The composite was fabricated by growing MIL-100(Fe) crystals on TiO 2 using surface-coated FeOOH as the precursor. The as-prepared MIL-100(Fe)/TiO 2 exhibited significantly improved photocatalytic performance over pristine TiO 2 , which was mainly because of the enhanced charge separation as confirmed by transient absorption spectroscopy analysis. This enhancement partially arose from the special chemical structure at the interface, where the Fe-O-Ti bond was formed. As verified by the density functional theory calculation, this distinct structure would create defect energy levels adjacent to the valence band maximum of TiO 2 . During the photocatalytic processes, the defect energy levels serve as sinks to capture excited charge carriers and retard the recombination, which subsequently leads to the increased charge density and promoted photocatalytic efficiency. Meanwhile, the intimate interactions between MIL-100(Fe) and TiO 2 would also help to improve the charge separation by transferring photo-induced holes through the ligands to Fe-O clusters. Lastly, these findings would advance the fundamental understanding of the interface structure and the charge transfer pathways in MOF/semiconductor composite photocatalysts.

36 MATERIALS SCIENCE↗

New Olivine-Based Cathode Materials

Olivine-type lithium transition metal orthosilicates, considered as promising cathode materials for the next-generation lithium-ion batteries, have attracted considerable interest in recent year. This is due to their low cost, good safety, and high theoretical capacity. However, great challenges still remain regarding their relatively low practical capacity, phase instability during charge/discharge, and low electronic conductivity. Here, combining data mining with state-of-the-art first-principles calculations, we present a comprehensive study of new olivine-based materials that can meet the above challenges and serve as ideal candidates for cathode materials of next-generation batteries.

Fang, Hong↗

Study of serious adverse drug reactions using FDA-approved drug labeling and MedDRA

Background Adverse Drug Reactions (ADRs) are of great public health concern. FDA-approved drug labeling summarizes ADRs of a drug product mainly in three sections, i.e., Boxed Warning (BW), Warnings and Precautions (WP), and Adverse Reactions (AR), where the severity of ADRs are intended to decrease in the order of BW > WP > AR. Several reported studies have extracted ADRs from labeling documents, but most, if not all, did not discriminate the severity of the ADRs by the different labeling sections. Such a practice could overstate or underestimate the impact of certain ADRs to the public health. In this study, we applied the Medical Dictionary for Regulatory Activities (MedDRA) to drug labeling and systematically analyzed and compared the ADRs from the three labeling sections with a specific emphasis on analyzing serious ADRs presented in BW, which is of most drug safety concern. Results This study investigated New Drug Application (NDA) labeling documents for 1164 single-ingredient drugs using Oracle Text search to extract MedDRA terms. We found that only a small portion of MedDRA Preferred Terms (PTs), 3819 out of 21,920 or 17.42%, were observed in a whole set of documents. In detail, 466/3819 (12.0%) PTs were in BW, 2023/3819 (53.0%) were in WP, and 2961/3819 (77.5%) were in AR sections. We also found a higher overlap of top 20 occurring BW PTs with WP sections compared to AR sections. Within the MedDRA System Organ Class levels, serious ADRs (sADRs) from BW were prevalent in Nervous System disorders and Vascular disorders. A Hierarchical Cluster Analysis (HCA) revealed that drugs within the same therapeutic category shared the same ADR patterns in BW (e.g., nervous system drug class is highly associated with drug abuse terms such as dependence, substance abuse, and respiratory depression). Conclusions This study demonstrated that combining MedDRA standard terminologies with data mining techniques facilitated computer-aided ADR analysis of drug labeling. We also highlighted the importance of labeling sections that differ in seriousness and application in drug safety. Using sADRs primarily related to BW sections, we illustrated a prototype approach for computer-aided ADR monitoring and studies which can be applied to other public health documents.

59 BASIC BIOLOGICAL SCIENCES↗

Sodium Superionic Conductors Based on Clusters

Owing to the high abundance and low cost of sodium (Na), Na-based rechargeable batteries hold great potential for large-scale applications in the future energy industry. However, as key component of the battery electrolyte, only a few Na-based superionic conductors can reach the ionic conductivity comparable to that of liquid or gel electrolytes. Here, we provide a guideline for the development of cluster-based Na-rich antiperovskite superionic conductors using computational studies. With a selected cluster ion BCl 4 – , we are able to achieve high-room-temperature Na-ionic conductivity over 10 –3 S/cm and low activation energies below 0.2 eV in the antiperovskite crystals Na 3 S(BCl 4 ) and Na 3 S(BCl 4 ) 0.5 I 0.5 . In addition, these materials have large bandgaps and favorable mechanical properties. Here, a comprehensive study of the stability and formation energy of these materials further illustrates possible routes for their synthesis. New insights into the conduction mechanism of these cluster-based superionic conductors are provided, including the cooperative motion of Na ions and the significant reduction of the migration barrier due to the changing orientation of the cluster ion.

25 ENERGY STORAGE↗

Super-alkalis as building blocks of one-dimensional hierarchical electrides

Electrides are ionic compounds where localized electrons act as anions. Because of their exotic properties in optoelectronics and catalysis, electrides have attracted considerable interest in recent years and many electrides, with anionic electrons distributed in zero-, one-, two- and three-dimensions, have been studied. In this paper, using first-principles calculations, we report a different class of inorganic electrides where Li 3 O super-alkali clusters form the building blocks of one-dimensional hierarchical structures, characterized by the presence of localized electrons with high charge density along a one-dimensional chain. We further show that the stability of this electride can be improved by embedding it inside a BN nanotube (BNNT). In addition, Li 3 O@BNNT exhibits powerful reducing ability as well as anti-ferromagnetism, highlighting the importance of nano-assembly in the development of new stable electrides with novel properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

B(SCN) 4 – : A New Weakly Coordinating Anion in the Tetracyanoborate Family

Halogen-free electrolytes are important for the development of the next-generation rechargeable Li-ion batteries. Due to its ultrahigh oxidative stability and weak binding with Li + , the bison anion B(CN) 4 – has recently been found to be a potential candidate for such electrolytes. Unfortunately, Li-bison salt has very poor solubility in ionic liquids, leading to the possible formation of large aggregates, thus hindering its potential for commercial application. We report by replacing the cyanide with much less toxic thiocyanide, we propose a new weakly coordinating anion, B(SCN) 4 – , which does not suffer from this drawback. We show that this new member of the tetracyanoborate family is unlikely to form aggregated complexes with Li + and would be a good candidate to be used in electrolytes.

36 MATERIALS SCIENCE↗

Simultaneous Detection and Removal of Formaldehyde at Room Temperature: Janus Au@ZnO@ZIF-8 Nanoparticles

The detection and removal of volatile organic compounds (VOCs) are of great importance to reduce the risk of indoor air quality concerns. Our study reports the rational synthesis of a dual-functional Janus nanostructure and its feasibility for simultaneous detection and removal of VOCs. The Janus nanostructure was synthesized via an anisotropic growth method, composed of plasmonic nanoparticles, semiconductors, and metal organic frameworks (e.g., Au@ZnO@ZIF-8). It exhibits excellent selective detection to formaldehyde (HCHO, as a representative VOC) at room temperature over a wide range of concentrations (from0.25 to 100 ppm), even in the presence of water and toluene molecules as interferences. Additionally, HCHOwas also found to be partially oxidized into non-toxic formic acid simultaneously with detection. The mechanism underlying this technology was unraveled by both experimental measurements and theoretical calculations: ZnO maintains the conductivity, while ZIF-8 improves the selective gas adsorption; the plasmonic effect of Au nanorods enhances the visible-light-driven photocatalysis of ZnO at room temperature.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Atomic-Level Design of Water-Resistant Hybrid Perovskites for Solar Cells by Using Cluster Ions

Organic–inorganic hybrid perovskites have emerged as the most promising material in the development of next-generation solar cells. However, the stability of these materials exemplified by CH 3 NH 3 PbI 3 is the most pressing challenge; it readily decomposes when exposed to moisture. In this work, we show how one can use a particular type of cluster ions, known as pseudohalides, to enhance the water resistance of the hybrid perovskite, while maintaining its favorable electronic properties. Starting with a simple physical model, we propose a new class of water-resistant hybrid perovskites as solar-cell absorbers based on the cluster ions by using DFT calculations and ab initio molecular dynamics. Limitations of applying the currently known pseudohalides for our purpose are also discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

B 12 (SCN) 12 – : An Ultrastable Weakly Coordinating Dianion

Stable dianions that are weakly coordinating with metal ions are not common. In this work, we show that the thiocyanate SCN– anion, known for its detoxification property of cyanide CN– and antidegradation property of perovskite solar-cell materials, can also be used to produce a new set of weakly coordinating B12(SCN)12– dianion complexes which are potential candidates for the anionic part inside the electrolytes of metal-ion, especially the magnesium-ion-based, batteries.

Fang, Hong↗

Role of ligands in the stability of B n X n and CB n-1 X n (n = 5–10; X = H, F, CN) and their potential as building blocks of electrolytes in lithium ion batteries

Stabilizing small multiply charged negative ions in the gas phase has been of considerable interest in recent years. B12H122- is one of the most well-known dianions which is stable against auto-detachment of its second electron in the gas phase by 0.9 eV, whereas BnHn2- with n < 12 is unstable. Using density functional theory, we have examined systematically the role of ligands in stabilizing smaller mono- and di-anions of BnXn and CBn-1Xn (n = 5–10; X = H, F, CN). We show that the stability of the negative ions of these complexes increases with the electron affinity of the ligand and Bn(CN)n2- can even be stable against electron emission for n ≥ 5. We also show that CBn-1(CN)n2- is stable against electron emission for n ≥ 8, even though these moieties contain one electron more than needed to satisfy the Wade–Mingos rule. We have examined the potential of these stable negative ions as building blocks of electrolytes in Li-ion batteries. By calculating the binding energies between the CBn-1Xn1-,2- and Li+, we find that some of these clusters may even outperform CB11H12- as electrolytes in metal-ion batteries.

Zhong, MingMin↗

Superhalogen-based lithium superionic conductors

The development of cheap, durable, and safe inorganic solid electrolytes with superionic conductivity is the key for the next generation of all-solid metal-ion batteries. The recent discovery of antiperovskites with composition Li 3 OA (A = halogen) shows promise in this regard. Here, we demonstrate the potential of a new class of antiperovskites where halogens are replaced by BH 4 superhalogens. In addition to maintaining the high ionic conductivity of Li 3 OA, Li 3 O(BH 4 ) is lightweight, mechanically flexible, thermodynamically more stable, and electronically more insulating than Li 3 OA. By mixing BH 4 with Cl to make Li 3 O(BH 4 ) 0.5 Cl 0.5 , we further show that the conductivity will be doubled. The Li + -ion conductivity of the new materials is of the order of 10 -4 to over 10 -3 S cm -1 at room temperature and will be well above 10 -2 S cm -1 at higher temperatures below the melting point. The conduction mechanism of the material is revealed by identifying the relationship between the orientational symmetry of the BH 4- rotors and the potential surface felt by the lithium ions.

Fang, Hong↗