Engineering topics
Fang, W.
Publications and source records attributed to Fang, W..
Measurement of $$ {e}^{+}{e}^{-}\to p{K}^{-}\overline{\Lambda}+c.c. $$ cross sections between 4.009 GeV and 4.951 GeV
Abstract Usinge + e − collision datasets corresponding to a total integrated luminosity of 21.7 fb −1 collected with the BESIII detector at the BEPCII collider at center-of-mass energies ranging from 4.009 GeV to 4.951 GeV, the energy-dependent cross sections of$$ {e}^{+}{e}^{-}\to p{K}^{-}\overline{\Lambda}+c.c. $$ e + e − → p K − Λ ¯ + c . c . are measured for the first time. By fitting these energy-dependent cross sections, we search for the excitedψstatesψ(4160) andψ(4415), and the vector charmonium-like statesψ(4230),ψ(4360), andψ(4660). No evidence for these is observed and the upper limits on the branching fractions of these states decaying into$$ p{K}^{-}\overline{\Lambda}+c.c. $$ p K − Λ ¯ + c . c . are set at the 90% confidence level.
Studies of the decay $$ {\textrm{D}}_{\textrm{s}}^{+}\to {\textrm{K}}^{+}{\textrm{K}}^{-}{\mu}^{+}{\nu}_{\mu } $$
Abstract The$$ {D}_s^{+}\to {K}^{+}{K}^{-}{\mu}^{+}{\nu}_{\mu } $$ D s + → K + K − μ + ν μ decay is studied based on 7.33 fb −1 ofe + e − collision data collected with the BESIII detector at center-of-mass energies in the range from 4.128 to 4.226 GeV. The absolute branching fraction is measured as$$ \mathcal{B}\left({D}_s^{+}\to \phi {\mu}^{+}{\nu}_{\mu}\right)=\left(2.25\pm 0.09\pm 0.07\right)\times {10}^{-2} $$ B D s + → ϕ μ + ν μ = 2.25 ± 0.09 ± 0.07 × 10 − 2 , the most precise measurement to date. Combining with the world average of$$ \mathcal{B}\left({D}_s^{+}\to \phi {e}^{+}{\nu}_e\right) $$ B D s + → ϕ e + ν e , the ratio of the branching fractions obtained is$$ \frac{\mathcal{B}\left({D}_s^{+}\to \phi {\mu}^{+}{\nu}_{\mu}\right)}{\mathcal{B}\left({D}_s^{+}\to \phi {e}^{+}{\nu}_e\right)}=0.94\pm 0.08 $$ B D s + → ϕ μ + ν μ B D s + → ϕ e + ν e = 0.94 ± 0.08 , in agreement with lepton universality. By performing a partial wave analysis, the hadronic form factor ratios atq 2 = 0 are extracted, finding$$ {r}_V=\frac{V(0)}{A_1(0)}=1.58\pm 0.17\pm 0.02 $$ r V = V 0 A 1 0 = 1.58 ± 0.17 ± 0.02 and$$ {r}_2=\frac{A_2(0)}{A_1(0)}=0.71\pm 0.14\pm 0.02 $$ r 2 = A 2 0 A 1 0 = 0.71 ± 0.14 ± 0.02 , where the first uncertainties are statistical and the second are systematic. No significantS-wave contribution fromf 0 (980)→ K + K − is found. The upper limit$$ \mathcal{B}\left({D}_s^{+}\to {f}_0(980){\mu}^{+}{\nu}_{\mu}\right)\cdot \mathcal{B}\left({f}_0(980)\to {K}^{+}{K}^{-}\right)<5.45\times {10}^{-4} $$ B D s + → f 0 980 μ + ν μ ⋅ B f 0 980 → K + K − < 5.45 × 10 − 4 is set at 90% credibility level.
Updated measurement of the branching fraction of D s + → τ + ν τ via τ + → π + ν ¯ τ
Not Available
Measurement of the branching fractions of the singly Cabibbo-suppressed decays $$ {\Lambda}_{\textrm{c}}^{+}\to \textrm{p}\eta $$ and $$ {\Lambda}_{\textrm{c}}^{+}\to \textrm{p}\omega $$
Abstract Based on 4.5 fb −1 e + e − collision data collected with BESIII detector at seven energy points between 4.600 and 4.699 GeV, the branching fractions for$$ {\Lambda}_c^{+}\to p\eta $$ Λ c + → pη and$$ {\Lambda}_c^{+}\to p\omega $$ Λ c + → pω were measured by means of single-tag method. The branching fractions of$$ {\Lambda}_c^{+}\to p\eta $$ Λ c + → pη and$$ {\Lambda}_c^{+}\to p\omega $$ Λ c + → pω are determined to be (1.57±0.11 stat ±0.04 syst )×10 −3 and (1.11±0.20 stat ±0.07 syst )×10 −3 , with a statistical significance of greater than 10σand 5.7σ, respectively. These results are consistent with the previous measurements by BESIII, LHCb and Belle, and the result of$$ {\Lambda}_c^{+}\to p\eta $$ Λ c + → pη is the most precise to date.
Measurement of the cross section of $$ {e}^{+}{e}^{-}\to {\Xi}^{-}{\overline{\Xi}}^{+} $$ at center-of-mass energies between 3.510 and 4.843 GeV
Abstract Usinge + e − collision data corresponding to a total integrated luminosity of 12.9 fb −1 collected with the BESIII detector at the BEPCII collider, the exclusive Born cross sections and the effective form factors of the reaction$$ {e}^{+}{e}^{-}\to {\Xi}^{-}{\overline{\Xi}}^{+} $$ e + e − → Ξ − Ξ ¯ + are measured via the single baryon-tag method at 23 center-of-mass energies between 3.510 and 4.843 GeV. Evidence for the decay$$ \psi (3770)\to {\Xi}^{-}{\overline{\Xi}}^{+} $$ ψ 3770 → Ξ − Ξ ¯ + is observed with a significance of 4.5σby analyzing the measured cross sections together with earlier BESIII results. For the other charmonium(-like) statesψ(4040),ψ(4160),Y(4230),Y(4360),ψ(4415), andY(4660), no significant signal of their decay to$$ {\Xi}^{-}{\overline{\Xi}}^{+} $$ Ξ − Ξ ¯ + is found. For these states, upper limits of the products of the branching fraction and the electronic partial width at the 90% confidence level are provided.
Breakdown of the drift-diffusion model for transverse spin transport in a disordered Pt film
Spin-accumulation and spin-current profiles are calculated for a disordered Pt film subjected to an in-plane electric current within the nonequilibrium Green's function approach. In the bulklike region of the sample, this approach captures the intrinsic spin Hall effect found in other calculations. Near the surfaces, the results reveal qualitative differences with the results of the widely used spin-diffusion model, even when the boundary conditions are modified to try to account for them. One difference is that the effective spin-diffusion length for transverse spin transport is significantly different from its longitudinal counterpart and is instead similar to the mean-free path. Furthermore, this feature may be generic for spin currents generated via the intrinsic spin Hall mechanism because of the differences in transport mechanisms compared to longitudinal spin transport. Orbital accumulation in the Pt film is only significant in the immediate vicinity of the surfaces and has a small component penetrating into the bulk only in the presence of spin-orbit coupling, as a secondary effect induced by the spin accumulation.
Measurement of Λ transverse polarization in e+e− collisions at $$ \sqrt{s} $$ = 3.68 − 3.71 GeV
Abstract With data samples collected with the BESIII detector at seven energy points at$$ \sqrt{s} $$ s = 3.68−3.71 GeV, corresponding to an integrated luminosity of 333 pb −1 , we present a study of the Λ transverse polarization in thee + e − →$$ \Lambda \overline{\Lambda} $$ Λ Λ ¯ reaction. The significance of polarization by combining the seven energy points is found to be 2.6σincluding the systematic uncertainty, which implies a non-zero phase between the transition amplitudes of the$$ \Lambda \overline{\Lambda} $$ Λ Λ ¯ helicity states. The modulus ratio and the relative phase of EM-psionicform factors combined with all energy points are measured to beR Ψ =$$ {0.71}_{-0.10}^{+0.10} $$ 0.71 − 0.10 + 0.10 ±0.03 and ∆Φ Ψ =$$ {23}_{-8.0}^{+8.8} $$ 23 − 8.0 + 8.8 ±1.6°, where the first uncertainties are statistical and the second systematic.
A Smart Vision System-on-a-ship Design Based on Programmable Neural Processor Integrated with Active Pixel Sensor
A low power smart vision system based on a large format (currently 1K x 1K) active pixel sensor (APS) integrated with a programmable neural processor for fast vision applications is presented.
Comparison of Intersubband GaAs/AlGaAs Multiple Quantum Well Infrared Photodetectors on GaAs and GaAs-on-Si Subtrates
We have successfully fabricated intersubband GaAs/AlGaAs quantum well infrared photodetectors grown on GaAs-on-Si substrate and evaluated their structural, electrical, and optical characteristics. We have found that the performance is comparable to a similar detector structure grown on a semi-insulating GaAs substrate.
Red-Shifting and Broadening of Quantum Well Infrared Photodetector's Response via Impurity-Free Vacancy Disordering
The partial intermixing of the well and barrier materials offers unique opportunities to shift locally the bandgap of quantum well structures (QW).
A VLSI Processor Design of Real-Time Data Compression for High-Resolution Imaging Radar
For the high-resolution imaging radar systems, real-time data compression of raw imaging data is required to accomplish the science requirements and satisfy the given communication and storage constraints. The Block Adaptive Quantizer (BAQ) algorithm and its associated VLSI processor design have been developed to provide a real-time data compressor for high-resolution imaging radar systems.
Image and Video Compression with VLSI Neural Networks
An advanced motion-compensated predictive video compression system based on artificial neural networks has been developed to effectively eliminate the temporal and spatial redundancy of video image sequences and thus reduce the bandwidth and storage required for the transmission and recording of the video signal. The VLSI neuroprocessor for high-speed high-ratio image compression based upon a self-organization network and the conventional algorithm for vector quantization are compared. The proposed method is quite efficient and can achieve near-optimal results.
Data Compression and VLSI Implementation
An integrated data compression system is proposed to provide adaptive multimode data compression for an advanced multi-instrument spacecraft payload system that has various source data.
Approximation methods for control of structural acoustics models with piezoceramic actuators
The active control of acoustic pressure in a 2-D cavity with a flexible boundary (a beam) is considered. Specifically, this control is implemented via piezoceramic patches on the beam which produces pure bending moments. The incorporation of the feedback control in this manner leads to a system with an unbounded input term. Approximation methods in this manner leads to a system with an unbounded input term. Approximation methods in this manner leads to a system with an unbounded input team. Approximation methods in the context of linear quadratic regulator (LQR) state space control formulation are discussed and numerical results demonstrating the effectiveness of this approach in computing feedback controls for noise reduction are presented.
Approximation methods for control of acoustic/structure models with piezoceramic actuators
The active control of acoustic pressure in a 2-D cavity with a flexible boundary (a beam) is considered. Specifically, this control is implemented via piezoceramic patches on the beam which produces pure bending moments. The incorporation of the feedback control in this manner leads to a system with an unbounded input term. Approximation methods in this manner leads to a system with an unbounded input term. Approximation methods in the context of linear quadratic regulator (LQR) state space control formulation are discussed and numerical results demonstrating the effectiveness of this approach in computing feedback controls for noise reduction are presented.
Active noise control - Piezoceramic actuators in fluid/structure interaction models
A model for a 2-D acoustic cavity with a flexible boundary (a beam) controlled via piezoceramic patches producing bending moments in the beam is considered. The associated control problem for this fluid/structure interaction system to reduce the acoustic pressure in the cavity involves unbounded control inputs. Approximation methods in the context of an LQR state space formulation are discussed, and numerical results are presented to demonstrate the effectiveness of this approach in computing feedback controls for noise reduction.