Search NASA⌕ Search

Engineering topics

Fang, Yi

Publications and source records attributed to Fang, Yi.

At least 37 records · Page 2

Neuroprotection of rhGLP‐1 in diabetic rats with cerebral ischemia/reperfusion injury via regulation of oxidative stress, EAAT2, and apoptosis

Preclinical Research & Development The purpose of the present study is to evaluate the neuroprotective effect of recombinant human glucagon‐like peptide‐1 (rhGLP‐1) as well as to explore corresponding mechanisms in diabetic rats with cerebral ischemia/reperfusion injury induced by middle cerebral artery occlusion (MCAO). Diabetes mellitus was induced by intraperitoneal injection of streptozotocin. The rats were pretreated with rhGLP‐1 (20 μg/kg intraperitoneally, thrice a day) for 14 days. Thereafter, the rats were subjected to MCAO 90 min/reperfusion 24 hr. At 2 and 24 hr of reperfusion, the rats were assessed for neurological deficits and subsequently executed for the evaluation of cerebral infarct volume, oxidative stress parameters, and the expression of excitatory amino acid transporter 2 (EAAT2) and apoptotic markers. Results indicate that rhGLP‐1 significantly ameliorated neurological deficits and reduced cerebral infarct volume in diabetic MCAO rats. In addition, oxidative stress parameters in ischemic penumbra were significantly alleviated in rhGLP‐1‐pretreated diabetic MCAO rats. rhGLP‐1 significantly upregulated the ratio of Bcl‐2/Bax and EAAT2 expression and downregulated cleaved caspase‐3 expression in ischemic penumbra of diabetic MCAO rats. Our results suggest that rhGLP‐1 could significantly ameliorate neurological deficits and reduce cerebral infarct volume in diabetic MCAO rats, which may be due to the inhibition of oxidative stress and apoptosis and the promotion of EAAT2 expression.

Fang, Yi↗

Mineralogical Controls on Frictional Strength, Stability, and Shear Permeability Evolution of Fractures

Massive fluid injection into the subsurface can induce microearthquakes by reactivating preexisting faults or fractures as seismic or aseismic slip. Such seismic or aseismic shear deformationsmay result in different modes of permeability evolution. Previous experimental studies have explored frictional stability-permeability relationships of carbonate-rich and phyllosilicate-rich samples under shear, suggesting that friction-permeability relationship may be primarily controlled by fracture minerals. We examine this relationship and identify the role of mineralogy (i.e., tectosilicate, carbonate, and phyllosilicate content) using direct-shear experiments on smooth saw-cut fractures of natural rocks and sintered fractures with distinct mineralogical compositions. These results indicate that the friction-permeability relationship is controlled by mineralogy. Frictional strength and permeability change upon reactivation decrease with phyllosilicate content but increase with tectosilicate content. In contrast, the reverse trend is observed for frictional stability (a-b). However, the permeability change decreases with carbonate content while both frictional strength and stability increase. The permeability change always decreases with an increase in frictional stability. This relationship implies a new mechanical-hydrochemical coupling loop via a linkage of frictional properties, mineralogy, and permeability.

58 GEOSCIENCES↗

The influence of Preslip Sealing on the Permeability Evolution of Fractures and Faults

The evolution of permeability on fractures and faults during the full earthquake cycle is shown to be sensitive to sealing during the repose phase. We explore the combined effect of static loading followed by fracture reactivation on permeability evolution via slide-hold-slide experiments. During the hold periods, permeability exhibits a slow but continuous reduction. The permeability decay is consistent with power law compaction of the aperture coupled with cubic law flow. With increasing hold periods, permeability evolves following reactivation from net reduction to net increase with the magnitude of the permeability change dependent on the hold period. This implies that the tight interlocking of asperities during interseismic repose primes the fault for permeability enhancement following reactivation. The inferred mechanism is via shear dilation with the probable involvement of unclogging. This result identifies that preslip sealing during repose is an essential component in the cyclic permeability evolution throughout the seismic cycle.

58 GEOSCIENCES↗

INDUCED MICROEARTHQUAKES AND SEISMICITY-PERMEABILITY RELATIONSHIPS IN FRACTURES

In the past several years, induced microearthquakes (MEQs) related to energy development projects have garnered public attention. Large-scale fluid injection in geoengineering activities, such as enhanced geothermal reservoir stimulation, geological storage of CO2, shale reservoir stimulation, and deep disposal of wastewater can generate significant fluid overpressures and induce microearthquakes by reactivating preexisting faults and fractures that are widely distributed throughout the upper crust. The monitoring of fluid-injection-induced microearthquakes can provide significant information (e.g., timing, special distribution, and moment magnitude) in evaluating reservoir development (e.g., fracture distribution and reservoir hydraulic conductivity evolution), in informing production strategies (e.g., accommodation of production wells), and in assessing the risks of fluid injection activities (e.g., caprock integrity of CO2 reservoir). The following questions are addressed in this study: (1) what are the mechanisms and implications of in-situ feedbacks (e.g., monitored fluid-injection-induced MEQs distribution, seismic moment magnitudes, and fracture behaviors) in geothermal stimulation? (2) What information can be derived from MEQs to inform geothermal reservoir stimulation strategies? (3) Are there any potential relationships between induced seismic or aseismic slip and permeability evolution of fractures in such unconventional reservoirs and caprocks? (4) What factors play an important role in controlling these relationships? These questions are addressed in the five individual chapters of this thesis.

58 GEOSCIENCES↗

Evolution of Friction and Permeability in a Propped Fracture under Shear

We explore the evolution of friction and permeability of a propped fracture under shear. We examine the effects of normal stress, proppant thickness, proppant size, and fracture wall texture on the frictional and transport response of proppant packs confined between planar fracture surfaces. The proppant-absent and proppant-filled fractures show different frictional strength. For fractures with proppants, the frictional response is mainly controlled by the normal stress and proppant thickness. The depth of shearing-concurrent striations on fracture surfaces suggests that the magnitude of proppant embedment is controlled by the applied normal stress. Under high normal stress, the reduced friction implies that shear slip is more likely to occur on propped fractures in deeper reservoirs. The increase in the number of proppant layers, from monolayer to triple layers, significantly increases the friction of the propped fracture due to the interlocking of the particles and jamming. Permeability of the propped fracture is mainly controlled by the magnitude of the normal stress, the proppant thickness, and the proppant grain size. Permeability of the propped fracture decreases during shearing due to proppant particle crushing and related clogging. Proppants are prone to crushing if the shear loading evolves concurrently with the normal loading.

42 ENGINEERING↗

Selective deuteration illuminates the importance of tunneling in the unimolecular decay of Criegee intermediates to hydroxyl radical products

Significance Ozonolysis of volatile biogenic and anthropogenic alkenes is a significant source of hydroxyl radicals, a key oxidant in the troposphere. A critical step in the generation of hydroxyl radicals is a hydrogen-atom transfer reaction involving a carbonyl oxide species, known as the Criegee intermediate. In this study, experiment and statistical theory reveal that selective deuteration of a Criegee intermediate results in deuterium atom transfer and slows the release of hydroxyl- d radicals. A large kinetic isotope effect is found at energies near the classical barrier to reaction and under thermal conditions relevant to the atmosphere. This demonstrates that quantum mechanical tunneling significantly enhances the rate of production of hydroxyl radicals in alkene ozonolysis reactions under atmospheric conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of weakening minerals on ensemble strength and slip stability of faults: Influence of Weakening Minerals on Fault

We explore the impact of phyllosilicate (weak but velocity strengthening) in a majority tectosilicate (strong but velocity weakening) matrix on bulk shear strength and slip stability of faults. Numerical simple shear experiments using a distinct element model (DEM) are conducted on both uniform mixtures of quartz and talc analogs and on textured mixtures consisting of a talc layer embedded in a quartz matrix. The mechanical response of particles is represented by a linear elastic contact model with a slip-weakening constitutive relation representing the essence of rate-state friction. The weight percentage of the talc in the uniform mixtures and the relative thickness of the talc layer in the textured mixtures are varied to investigate the transitional behavior of shear strength and slip stability. Specifically, for uniform mixtures, ~50% reduction on bulk shear strength is observed with 25% talc present, and a dominant influence of talc occurs at 50%; for textured mixtures, a noticeable weakening effect is shown at a relative layer thickness of 1 particle, ~50% shear strength reduction is observed with 3-particles, and a dominant influence occurs at 5 particles. In terms of slip stability, a transition from velocity weakening to velocity strengthening is observed with 10% to 25% talc present in the uniform mixtures or with 3 particles to 5 particles in the textured mixtures. In addition, further analysis suggests that quartz has a high tendency toward dilation, potentially promoting permeability; while talc dilates with increased slip rate but compacts rapidly when slip rate is reduced, potentially destroying permeability. The simulation results match well with previous laboratory observations.

58 GEOSCIENCES↗

Tunneling effects in the unimolecular decay of (CH 3 ) 2 COO Criegee intermediates to OH radical products

Unimolecular decay of the dimethyl substituted Criegee intermediate (CH 3 ) 2 COO is observed at energies significantly below the transition state barrier associated with hydrogen atom transfer with time-resolved detection of the resultant OH radical products. (CH 3 ) 2 COO is prepared at specific energies in the 3900-4600 cm -1 region through IR excitation of combination bands involving CH stretch and another lower frequency mode, and the OH products are detected by UV laser-induced fluorescence. OH appearance times on the order of microseconds are observed in this deep tunneling regime, which are about 100 times slower than that in the vicinity of the barrier. The experimental rates are in good accord with Rice-Ramsperger-Kassel-Marcus (RRKM) calculations of the microcanonical dissociation rates for (CH 3 ) 2 COO that include tunneling. Master equation modeling based on these microcanonical rates is used to predict the thermal decay rate of (CH 3 ) 2 COO to OH products under atmospheric conditions of 276 s -1 at 298 K (high pressure limit). Furthermore, thermal unimolecular decay of (CH 3 ) 2 COO to OH products is shown to have significant contributions from tunneling at energies much below the barrier to H-atom transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Frictional stability-permeability relationships for fractures in shales

There is wide concern that fluid injection in the subsurface, such as for the stimulation of shale reservoirs or for geological CO 2 sequestration (GCS), has the potential to induce seismicity that may change reservoir permeability due to fault slip. However, the impact of induced seismicity on fracture permeability evolution remains unclear due to the spectrum of modes of fault reactivation (e.g., stable versus unstable). As seismicity is controlled by the frictional response of fractures, we explore friction-stability-permeability relationships through the concurrent measurement of frictional and hydraulic properties of artificial fractures in Green River shale (GRS) and Opalinus shale (OPS). We observe that carbonate-rich GRS shows higher frictional strength but weak neutral frictional stability. The GRS fracture permeability declines during shearing while an increased sliding velocity reduces the rate of permeability decline. By comparison, the phyllosilicate-rich OPS has lower friction and strong stability while the fracture permeability is reduced due to the swelling behavior that dominates over the shearing induced permeability reduction. Furthermore, we conclude that the friction-stability-permeability relationship of a fracture is largely controlled by mineral composition and that shale mineral compositions with strong frictional stability may be particularly subject to permanent permeability reduction during fluid infiltration.

58 GEOSCIENCES↗

Deep tunneling in the unimolecular decay of CH 3 CHOO Criegee intermediates to OH radical products

Unimolecular decay of Criegee intermediates produced in alkene ozonolysis is known to be a significant source of OH radicals in the troposphere. In this work, unimolecular decay of the methyl-substituted Criegee intermediate, syn -CH 3 CHOO, to OH products is shown to occur at energies significantly below the transition state barrier for a 1,4 hydrogen transfer that leads to these products. The rate of appearance of OH products arising from tunneling through the barrier is obtained through direct time-domain measurements following the vibrational activation of syn -CH 3 CHOO. IR excitation of syn -CH 3 CHOO at energies nearly 2000 cm -1 below the barrier is achieved through combination bands involving CH stretch and another lower frequency mode, and the resultant OH products are detected by UV laser-induced fluorescence. The observed syn -CH 3 CHOO combination bands in the 4100–4350 cm -1 region are identified by comparison with the computed IR absorption spectrum. The experimental decay rates are found to be ca. 106 s -1 in this deep tunneling regime, which is approximately 100-times slower than that in the vicinity of the barrier.The experimental results are consistent with statistical Rice-Ramsperger-Kassel-Marcus (RRKM) calculations of the microcanonical decay rates with tunneling through the barrier, and notable deviations may originate from the sparsity in the density of states for syn -CH 3 CHOO at lower energies. Finally, thermal unimolecular decay of syn -CH 3 CHOO is predicted to have significant contribution from microcanonical rates at energies that are much below the barrier.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Benchmark Problems of the Geothermal Technologies Office Code Comparison Study

A diverse suite of numerical simulators is currently being applied to predict or understand the performance of enhanced geothermal systems (EGS). To build confidence and identify critical development needs for these analytical tools, the United States Department of Energy, Geothermal Technologies Office has sponsored a Code Comparison Study (GTO-CCS), with participants from universities, industry, and national laboratories. A principal objective for the study was to create a community forum for improvement and verification of numerical simulators for EGS modeling. Teams participating in the study were those representing U.S. national laboratories, universities, and industries, and each team brought unique numerical simulation capabilities to bear on the problems. Two classes of problems were developed during the study, benchmark problems and challenge problems. The benchmark problems were structured to test the ability of the collection of numerical simulators to solve various combinations of coupled thermal, hydrologic, geomechanical, and geochemical processes. This class of problems was strictly defined in terms of properties, driving forces, initial conditions, and boundary conditions. Study participants submitted solutions to problems for which their simulation tools were deemed capable or nearly capable. Some participating codes were originally developed for EGS applications whereas some others were designed for different applications but can simulate processes similar to those in EGS. Solution submissions from both were encouraged. In some cases, participants made small incremental changes to their numerical simulation codes to address specific elements of the problem, and in other cases participants submitted solutions with existing simulation tools, acknowledging the limitations of the code. The challenge problems were based on the enhanced geothermal systems research conducted at Fenton Hill, near Los Alamos, New Mexico, between 1974 and 1995. The problems involved two phases of research, stimulation, development, and circulation in two separate reservoirs. The challenge problems had specific questions to be answered via numerical simulation in three topical areas: 1) reservoir creation/stimulation, 2) reactive and passive transport, and 3) thermal recovery. Whereas the benchmark class of problems were designed to test capabilities for modeling coupled processes under strictly specified conditions, the stated objective for the challenge class of problems was to demonstrate what new understanding of the Fenton Hill experiments could be realized via the application of modern numerical simulation tools by recognized expert practitioners.

15 GEOTHERMAL ENERGY↗

Direct observation of unimolecular decay of CH{sub 3}CH{sub 2}CHOO Criegee intermediates to OH radical products

The unimolecular decay of carbonyl oxide intermediates, known as Criegee intermediates, produced in alkene ozonolysis is a significant source of OH radicals in the troposphere. Here, the rate of appearance of OH radical products is examined directly in the time-domain for a prototypical alkyl-substituted Criegee intermediate, CH{sub 3}CH{sub 2}CHOO, following vibrational activation under collision-free conditions. Complementary statistical Rice–Ramsperger–Kassel–Marcus calculations of the microcanonical unimolecular decay rate for CH{sub 3}CH{sub 2}CHOO are also carried out at energies in the vicinity of the barrier for 1,4 hydrogen atom transfer that leads to OH products. Tunneling through the barrier, derived from high level electronic structure calculations, contributes significantly to the decay rate. Infrared transitions of CH{sub 3}CH{sub 2}CHOO are identified in the CH stretch overtone region, which are detected by ultraviolet laser-induced fluorescence of the resultant OH products. The features observed are attributed to CH vibrational excitations and conformational forms utilizing insights from theory. Both experiment and theory yield unimolecular decay rates for CH{sub 3}CH{sub 2}CHOO of ca. 10{sup 7} s{sup −1}, which are slower than those obtained for syn-CH{sub 3}CHOO or (CH{sub 3}){sub 2}COO reported previously [Fang et al., J. Chem. Phys. 144, 061102 (2016)] at similar energies. Master equation modeling is also utilized to predict the thermal decay rate of CH{sub 3}CH{sub 2}CHOO under atmospheric conditions, giving a rate of 279 s{sup −1} at 298 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Communication: Real time observation of unimolecular decay of Criegee intermediates to OH radical products

In the atmosphere, a dominant loss process for carbonyl oxide intermediates produced from alkene ozonolysis is also an important source of hydroxyl radicals. In this work, the rate of appearance of OH radicals is revealed through direct time-domain measurements following vibrational activation of prototypical methyl-substituted Criegee intermediates under collision-free conditions. Complementary theoretical calculations predict the unimolecular decay rate for the Criegee intermediates in the vicinity of the barrier for 1,4 hydrogen transfer that leads to OH products. Both experiment and theory yield unimolecular decay rates of ca. 10 8 and 10 7 s –1 for syn -CH 3 CHOO and (CH 3 ) 2 COO, respectively, at energies near the barrier. Tunneling through the barrier, computed from high level electronic structure theory and experimentally validated, makes a significant contribution to the decay rate. Extension to thermally averaged unimolecular decay of stabilized Criegee intermediates under atmospheric conditions yields rates that are six orders of magnitude slower than those evaluated directly in the barrier region.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

THMC Modeling of EGS Reservoirs -- Continuum through Discontinuum Representations. Capturing Reservoir Stimulation, Evolution and Induced Seismicity

This work has investigated the roles of effective stress induced by changes in fluid pressure, temperature and chemistry in contributing to the evolution of permeability and induced seismicity in geothermal reservoirs. This work has developed continuum models [1] to represent the progress or seismicity during both stimulation [2] and production [3]. These methods have been used to resolve anomalous observations of induced seismicity at the Newberry Volcano demonstration project [4] through the application of modeling and experimentation. Later work then focuses on the occurrence of late stage seismicity induced by thermal stresses [5] including the codifying of the timing and severity of such responses [6]. Furthermore, mechanistic linkages between observed seismicity and the evolution of permeability have been developed using data from the Newberry project [7] and benchmarked against field injection experiments. Finally, discontinuum models [8] incorporating the roles of discrete fracture networks have been applied to represent stimulation and then thermal recovery for new arrangements of geothermal wells incorporating the development of flow manifolds [9] in order to increase thermal output and longevity in EGS systems.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

UV Photodissociation Dynamics of the CH 3 CHOO Criegee Intermediate: Action Spectroscopy and Velocity Map Imaging of O-Atom Products

We report that UV excitation of jet-cooled CH 3 CHOO on the B 1 A'–X 1 A' transition results in dissociation to two spin-allowed product channels: CH 3 CHO X 1 A' + O 1 D and CH 3 CHO a 3 A" + O 3 P. The O 1 D and O 3 P products are detected using 2 + 1 REMPI at 205 and 226 nm, respectively, for action spectroscopy and velocity map imaging studies. The O 1 D action spectrum closely follows the previously reported UV absorption spectrum for jet-cooled CH 3 CHOO [ Beames et al. J. Chem. Phys. 2013 , 138 , 244307]. Velocity map images of the O 1 D products following excitation of CH 3 CHOO at 305, 320, and 350 nm exhibit anisotropic angular distributions indicative of rapid (ps) dissociation, along with broad and unstructured total kinetic energy (TKER) distributions that reflect the internal energy distribution of the CH 3 CHO X 1 A' coproducts. The O 3 P action spectrum turns on near the peak of the UV absorption spectrum (ca. 324 nm) and extends to higher energy with steadily increasing O 3 P yield. Excitation of CH 3 CHOO at 305 nm, attributed to absorption of the more stable syn -conformer, also results in an anisotropic angular distribution of O 3 P products arising from rapid (ps) dissociation, but a narrower TKER distribution since less energy is available to the CH 3 CHO a 3 A" + O 3 P products. The threshold for the higher energy CH 3 CHO a 3 A" + O 3 P product channel is determined to be ca. 88.4 kcal mol –1 from the termination of the TKER distribution and the onset of the O 3 P action spectrum. This threshold is combined with the singlet-triplet spacings of O atoms and acetaldehyde to establish the dissociation energy for syn -CH 3 HOO X 1 A' to the lowest spin-allowed product channel, CH 3 CHO X 1 A' + O 1 D, of ≤55.9 ± 0.4 kcal mol –1 . Lastly, a harmonic normal-mode analysis is utilized to identify the vibrational modes of CH 3 CHO likely to be excited upon dissociation into the two product channels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗