Search NASA⌕ Search

Engineering topics

Farha, Omar K.

Publications and source records attributed to Farha, Omar K..

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Integrated CO 2 Capture and Conversion by a Robust Cu(I)-Based Metal–Organic Framework

Metal-organic frameworks (MOFs) have shown promise in both capturing CO 2 under flue gas conditions and converting it into valuable chemicals. However, the development of a single MOF capable of capturing and selectively converting CO 2 has remained elusive due to lack of harmonious combination of selectivity, water stability, and reactivity. For example, Cu(I)-based MOFs are particularly effective for CO 2 conversion, but they do not typically exhibit selective CO 2 adsorption and often suffer from instability in the presence of air and moisture. Developing a Cu(I) MOF that is stable under flue gas conditions while also capturing CO 2 from this mixture would likely afford a material capable of selectively capturing and converting CO 2 in an integrated pathway, which would represent a significant advancement in this field. In this study, we introduce NU-2100, an ultramicroporous Cu(I) MOF, which exhibits both selectivity for CO 2 adsorption and great stability even in the presence of moisture and air. Comprehensive evaluations involving exposure to air, oxygen, water, and varying temperatures reveal that NU-2100 demonstrates superior stability compared to other known Cu(I) MOFs. Utilizing adsorption isotherms and thermogravimetric analysis coupled with gas chromatography-mass spectrometry (TGA-GCMS), we establish the high selectivity of NU-2100 for CO 2 over common flue gas components, including water, nitrogen, and oxygen. Additionally, under mild reaction conditions (50 °C and H 2 :CO 2 = 3:1), NU-2100 exhibits CO 2 capture and catalytic conversion to formic acid with 100% selectivity. Furthermore, this study marks an important step towards the design of next-generation MOFs capable of integrated carbon capture and utilization (iCCU) under industrial conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Advancements in cerium/titanium metal-organic frameworks: Unparalleled stability in CO oxidation

Due to the excellent catalytic properties of Ce-based materials, the development of thermally stable metal-organic frameworks (MOFs) based on Ce-oxo clusters has attracted significant attention but remains challenging. In this work, we report the synthesis of an unreported Ce 4 Ti 2 -TMA (Ce IV 4 Ti IV 2 O 4 (OH) 4 (C(CH 3 ) 3 COO) 12 ·3H 2 O·3MeCN) cluster, which serves as an ideal source for the assembly of robust Ce/Ti-MOFs. Using this cluster, we constructed two isostructural MOFs, denoted as NU-3000 and NU-3001. Single-crystal X-ray diffraction analysis confirms these MOFs as mesoporous structures with 12-coordinated Ce 3 Ti 3 nodes. Furthermore, structural analysis reveals a plane triangular node structure that likely contributes to the excellent thermal stability of these MOFs. Finally, both MOFs show catalytic activity toward high-temperature (250°C) CO oxidation and maintain significant porosity, emphasizing the thermal stability of these materials under practical catalytic conditions. Furthermore, the straightforward synthesis of thermally robust Ce/Ti-MOFs from the Ce 4 Ti 2 -TMA cluster will pave the way for future Ce/Ti-MOF-based catalyst development.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A Titanium-Based Metal–Organic Framework For Tandem Metallaphotocatalysis

Metal–organic frameworks (MOFs) have garnered substantial attention for their unique properties, such as high porosity and tunable structures, making them versatile for various applications. This paper constructs photoactive titanium–organic frameworks by combining Ti(IV) clusters and a bipyridine linker. The MOF is synthesized in situ through imine condensation, resulting in NU-2300. Subsequent ex situ nickel salt complexation results in NU-2300-Ni, which is then used for light-mediated carbon–heteroatom cross-couplings. The photophysical properties of the metallaphotocatalyst were investigated by UV-vis and EPR analysis, and both the Ti cluster and the bipyridine linker were found to contribute to successful catalysis, making it a tandem catalyst. The heterogeneous material retained its performance through five cycles of thioetherification. As a result, this work contributes not only to MOF synthetic strategies, but also to expanding MOF applications as recyclable, tandem metallaphotocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Role of Metal–Organic Framework Topology on Thermodynamics of Polyoxometalate Encapsulation

Polyoxometalates (POMs) are discrete anionic clusters whose rich redox properties, strong Brønsted acidity, and high availability of active sites poise them as potent catalysts for oxidation reactions. Here, metal–organic frameworks (MOFs) have emerged as tunable, porous platforms to immobilize POMs, thus increasing their solution stability and catalytic activity. While POM@MOF composite materials have been widely used for a variety of applications, little is known about the thermodynamics of the encapsulation process. Here, we utilize an up-and-coming technique in the field of heterogeneous materials, isothermal titration calorimetry (ITC), to obtain full thermodynamic profiles (ΔH, ΔS, ΔG, K a ) of POM binding. Six different 8-connected hexanuclear Zr-MOFs were investigated to determine the impact of MOF topology (csq, scu, the) on POM encapsulation thermodynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Unveiling Synergetic Photocatalytic Activity from Heterometallic Ti/Ce Clusters

Titanium-oxo clusters, with their robust structure and suitable optical and electronic properties, have been widely investigated as photocatalysts. Heterometallic Ti/M-oxo clusters provide additional tunability and functionality, which enable systematic structure-activity investigations to elucidate reaction mechanisms and improve catalyst de-sign. Incorporating cerium into Ti-oxo clusters can provide additional redox (Ce IV /Ce III ) and oxygen harvesting ability, but to date only limited number of structurally defined titanium-cerium (Ti/Ce) clusters have been reported due to their synthetic challenges. Herein, we report the synthesis and photocatalytic properties of two structurally defined Ti/Ce-oxo clusters, Ti 8 Ce 2 (BA) 16 and Ti 9 Ce 4 (BA) 20 , as well as a TiCe-BA cluster with a calculated formula of Ti 20 Ce 9 O 36 (BA) 42 . Photocatalytic study of these clusters demonstrates that the amount of Ce 3+ species greatly impacts its photocatalytic oxidation performance, and their superior photocatalytic reactivity towards aerobic alcohol oxidation can be contributed to the synergistic effects of the multiple radical species generated upon light absorption. Furthermore, this work represents a significant milestone in the construction of stable Ti/Ce-oxo clusters, enriching the current library of known heterometallic Ti/M-oxo clusters, and providing a series of crystalline materials with great promise of photo-luminescence and photovoltaic chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Precise Modulation of CO 2 Sorption in Ti 8 Ce 2 –Oxo Clusters: Elucidating Lewis Acidity of the Ce Metal Sites and Structural Flexibility

Investigating the structure-property correlation in porous materials is a fundamental and consistent focus in various scientific domains, especially within sorption research. Metal oxide clusters with capping ligands, characterized by intrinsic cavities formed through specific solid-state packing, demonstrate significant potential as versatile platforms for sorption investigations due to their precisely tunable atomic structures and inherent long-range order. This study presents a series of Ti 8 Ce 2 -oxo clusters with subtle variations in coordinated linkers and explores their sorption behavior. Notably, Ti 8 Ce 2 -BA (BA denotes benzoic acid) manifests a distinctive two-step profile during CO 2 adsorption, accompanied by a hysteresis loop. This observation marks a new instance within the metal oxide cluster field. Of intrigue, the presence of unsaturated Ce(IV) sites was found to be correlated with the stepped sorption property. Moreover, the introduction of an electrophilic fluorine atom, positioned ortho or para to the benzoic acid, facilitated precise control over gate pressure and stepped sorption quantities. Advanced in-situ techniques systematically unraveled the underlying mechanism behind this unique sorption behavior. The findings elucidate that robust Lewis base-acid interactions are established between CO 2 molecules and Ce ions, consequently altering the conformation of coordinated linkers. Conversely, the F atoms primarily contribute to gate pressure variation by influencing the Lewis acidity of the Ce sites. This research advances the understanding in fabricating metal-oxo clusters with structural flexibility and provides profound insights into their host-guest interaction motifs. Furthermore, these insights hold substantial promise across diverse fields and offer valuable guidance for future adsorbent designs grounded in fundamental theories of structure-property relationships.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

An active, stable cubic molybdenum carbide catalyst for the high-temperature reverse water-gas shift reaction

Although technologically promising, the reduction of carbon dioxide (CO 2 ) to produce carbon monoxide (CO) remains economically challenging owing to the lack of an inexpensive, active, highly selective, and stable catalyst. We show that nanocrystalline cubic molybdenum carbide (α-Mo 2 C), prepared through a facile and scalable route, offers 100% selectivity for CO 2 reduction to CO while maintaining its initial equilibrium conversion at high space velocity after more than 500 hours of exposure to harsh reaction conditions at 600°C. The combination of operando and postreaction characterization of the catalyst revealed that its high activity, selectivity, and stability are attributable to crystallographic phase purity, weak CO-Mo 2 C interactions, and interstitial oxygen atoms, respectively. Mechanistic studies and density functional theory (DFT) calculations provided evidence that the reaction proceeds through an H 2 -aided redox mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Constraining Flexibility in the MIL-88 Topology through Integration of 3-Dimensional Linkers

Metal–organic frameworks (MOFs) are a class of crystalline, nanoporous materials that are recognized for their tunability. While some MOFs demonstrate flexibility, this characteristic can pose challenges in achieving precise pore control or establishing permanent porosity. Specifically, MIL-88B, is notable for its high flexibility, as it is constructed from metal trimer clusters and 2-dimensional linkers (2DLs) featuring planar, aromatic cores, allowing significant structural changes. In this study, we synthesized two new MOFs, NU-2010 and NU-2011, which are structurally analogous to MIL-88B but incorporate ditopic 3-dimensional linkers (3DLs) with sterically bulky cores and higher symmetry. Our aim was to investigate whether the introduction of 3DLs could mitigate the flexibility observed in MIL-88B. We employed a combination of single crystal and powder X-ray diffraction techniques to assess the flexibility of MIL-88B, NU-2010, and NU-2011 under various conditions including thermal activation, solvent exchange, and temperature changes. Furthermore, our findings indicate that incorporating 3DLs significantly reduces framework flexibility in NU-2010 and NU-2011 relative to MIL-88B.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Uranyl uptake into metal–organic frameworks: a detailed X-ray structural analysis

Metal–organic frameworks (MOF) are a subclass of porous framework materials that have been used for a wide variety of applications in sensing, catalysis, and remediation. Among these myriad applications is their remarkable ability to capture substances in a variety of environments ranging from benign to extreme. Among the most common and problematic substances found throughout the world's oceans and water supplies is [UO 2 ] 2+ , a common mobile ion of uranium, which is found both naturally and as a result of anthropogenic activities, leading to problematic environmental contamination. While some MOFs possess high capability for the uptake of [UO 2 ] 2+ , many more of the thousands of MOFs and their modifications that have been produced over the years have yet to be studied for their ability to uptake [UO 2 ] 2+ . However, studying the thousands of MOFs and their modifications presents an incredibly difficult task. As such, a way to narrow down the numbers seems imperative. In this work, we evaluate the binding behaviors as well as identify the specific binding sites of [UO 2 ] 2+ incorporated into six different Zr MOFs to elucidate specific features that improve [UO 2 ] 2+ uptake. In doing so, we also present a method for the determination and verification of these binding sites by Anomalous wide-angle X-ray scattering, X-ray fluorescence, and X-ray absorption spectroscopy. This research not only presents a way for future research into the uptake of [UO 2 ] 2+ into MOFs to be conducted but also a means to evaluate MOFs more generally for the uptake of other compounds to be applied for environmental remediation and improvement of ecosystems globally.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Metal–Organic Frameworks as a Tunable Platform to Deconvolute Stereoelectronic Effects on the Catalytic Activity of Thioanisole Oxidation

The local environment of a metal active site plays an important role in affecting catalytic activity and selectivity. In re-cent studies, tailoring the behavior of a molybdenum-based active site via modulation of the first coordination sphere has led to improved thioanisole oxidation performance, but disentangling electronic effects from steric influences that arise from these modifications is nontrivial, especially in heterogeneous systems. To this end, the tunability of metal–organic frameworks (MOFs) makes them promising scaffolds for controlling the coordination sphere of a heterogene-ous, catalytically-active metal site while offering additional, attractive features such as crystallinity and high porosity. Herein, we report a variety of MOF-supported Mo species, which were investigated for catalytic thioanisole oxidation to methyl phenyl sulfoxide and/or methyl phenyl sulfone using tert-butyl hydroperoxide (tBHP) as the oxidant. In particular, MOFs of contrasting node architectures were targeted, presenting a unique opportunity to investigate ste-reoelectronic control of Mo active sites in a systematic manner. A Zr 6 -based MOF, NU-1000, was employed along with its sulfated analog Zr 6 -based NU-1000-SO 4 to anchor a dioxymolybdenum species, which enabled examination of sup-port-mediated active site polarizability on catalytic performance. In addition, a MOF containing a mixed metal node, Mo-MFU-4l, was used to probe the stereoelectronic impact of an N-donor ligand environment on the catalytic activity of the transmetalated Mo center. Furthermore, characterization techniques including single crystal X-ray diffraction, were concomi-tantly used with reaction kinetic profiles to better comprehend the dynamics of different Mo active sites, thus correlat-ing structural change with activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Influence of Linker Identity on the Photochemistry of Uranyl-Organic Frameworks

While uranyl-based metal–organic frameworks (MOFs) boast impressive photocatalytic abilities, significant questions remain regarding their excitation pathways and methods to fine-tune their performance due to the lack of information regarding heterogeneous uranyl catalysis. Herein, we investigated how linker identity and photoexcitation impact uranyl photocatalysis when the uranyl coordination environment remains constant. Toward this end, we prepared three uranyl-based MOFs (NU-1301, NU-1307, and ZnTCPP-U2) and then examined the structural and photochemical properties of each through X-ray diffraction, X-ray absorption, and photoluminescence. We then correlated our observations to the photocatalytic performance for fluorination of cyclooctane. The excitation profile from NU-1301 and NU-1307 exhibited spin-forbidden linker transitions and uranyl vibronic progressions, with uranyl excitation and emission being most dominant in NU-1301. Consequently, NU-1301 was a more active photocatalyst than NU-1307. In contrast, the excitation profile from ZnTCPP-U2 contained transitions associated with the porphyrin linker exclusively. Photocatalytic activity from ZnTCPP-U2 significantly underperformed in comparison to that of the other two MOFs. Furthermore, these data suggest that linkers’ photophysical properties can be used to predict the photocatalytic behavior of uranyl-containing MOFs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Investigating the mechanical stability of flexible metal–organic frameworks

As we continue to develop metal–organic frameworks (MOFs) for potential industrial applications, it becomes increasingly imperative to understand their mechanical stability. Notably, amongst flexible MOFs, structure-property relationships regarding their compressibility under pressure remain unclear. In this work, we conducted in situ variable pressure powder X-ray diffraction (PXRD) measurements up to moderate pressures (<1 GPa) using a synchrotron source on two families of flexible MOFs: (i) NU-1400 and NU-1401, and (ii) MIL-88B, MIL-88B-(CH 3 ) 2 , and MIL-88B-(CH 3 ) 4 . In this project scope, we found a positive correlation between bulk moduli and degree of flexibility, where increased rigidity (e.g., smaller swelling or breathing amplitude) arising from steric hindrance was deleterious, and observed reversibility in the unit cell compression of these MOFs. This study serves as a primer for the community to begin to untangle the factors that engender flexible frameworks with mechanical resilience.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Mapping the Complete Reaction Energy Landscape of a Metal–Organic Framework Phase Transformation

Crystalline materials undergo valuable phase transformations, and the energetic processes that underlie these transformations can be fully characterized through a combination of thermodynamic and kinetic studies. Here, we report the first complete reaction energy landscape of metal–organic framework (MOF) interpenetration, specifically in the phase transformation of NU-1200 to its doubly interpenetrated counterpart, STA-26. We characterized the thermodynamics of this phase transformation by pairing experiments with density functional theory (DFT) calculations. This analysis revealed that factors such as the increase in crystal density likely drive Zr- and Hf-NU-1200 to STA-26 interpenetration, while other chemical interactions such as steric repulsions prevent Th-NU-1200 from interpenetrating. Using time-resolved in situ X-ray diffraction, we monitored phase transformation reaction profiles and extracted quantitative kinetic information using the Avrami-Erofe’ev model. As a result, we obtained activation energies for the Zr- and Hf-NU-1200 transformations to Zr- and Hf-STA-26, respectively, revealing slower phase change kinetics for MOFs with stronger bonds. Finally, we paired the kinetic data with experimental observations to classify the mechanistic model of this phase transformation as partial dissolution. Here, we anticipate that this thermodynamic, kinetic, and mechanistic understanding will broadly inform further studies on the energetics of crystallization.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Evidence of a Uranium‐Paddlewheel Node in a Catecholate‐Based Metal–Organic Framework

Abstract The interactions between uranium and non‐innocent organic species are an essential component of fundamental uranium redox chemistry. However, they have seldom been explored in the context of multidimensional, porous materials. Uranium‐based metal–organic frameworks (MOFs) offer a new angle to study these interactions, as these self‐assembled species stabilize uranium species through immobilization by organic linkers within a crystalline framework, while potentially providing a method for adjusting metal oxidation state through coordination of non‐innocent linkers. We report the synthesis of the MOF NU‐1700 , assembled from U 4+ ‐paddlewheel nodes and catecholate‐based linkers. We propose this highly unusual structure, which contains two U 4+ ions in a paddlewheel built from four linkers—a first among uranium materials—as a result of extensive characterization via powder X‐ray diffraction (PXRD), sorption, transmission electron microscopy (TEM), and thermogravimetric analysis (TGA), in addition to density functional theory (DFT) calculations.

Knapp, Julia G.↗