Search NASA⌕ Search

Engineering topics

Farina, D

Publications and source records attributed to Farina, D.

Measure of electron cyclotron emission at multiple angles in high T{sub e} plasmas of JET

The oblique electron cyclotron emission (ECE) diagnostic installed at JET allows simultaneous analysis of the ECE spectra along three lines of sight (with toroidal angles of 0 deg., {approx}10 deg., and {approx}20 deg.) and two linear polarizations for each oblique line of sight. The diagnostic is capable of measuring EC emission over the band of 75-800 GHz with 5 ms time resolution and 7.5 GHz spectral resolution, and it is designed to investigate the features of ECE spectra related to electron distribution in the thermal velocity range. Instrumental accuracy was assessed using sources at different temperatures (77-900 K) and with plasma emission. ECE from high temperature plasmas and in the presence of fast ions has been compared to simulations performed with the modeling code SPECE, setting an upper limit to possible discrepancies from thermal emission.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Studies on LH-generated Fast Electron Tail Using the Oblique ECE Diagnostic at JET

The new Oblique ECE diagnostics of JET allows simultaneous measurement along three lines of sight at different toroidal angles. JET pulses, in which modulated LHCD power was applied, were analyzed by means of the SPECE emission code, which takes into account the fast electron tail generated by LH. The code results were compared to the ECE spectra from the oblique ECE diagnostic. The match between the computed and the experimental data from the three lines of sight provides an estimate of the density of superthermal electrons and of their maximum energy from which the fraction of the plasma current driven by LHCD is derived.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Full-wave calculations of the O-X-B mode conversion scenario in the RFX-mod reversed field pinch device

The possibility of coupling electron Bernstein waves (EBW) to the overdense plasma in RFX-mod has been explored. A frequency of 28 GHz has been chosen due to the plasma parameters and the commercial availability of this frequency. A two dimensional full-wave code has been used to model the O-X-B mode conversion process in which an incident O-mode is first converted to an X-mode and then to an EBW. Parameter studies have been carried out to optimise the mode-conversion efficiency. The maximum conversion efficiency for optimal launching conditions amounts to 56% for a single pass. The vacuum vessel has been included in the full-wave calculations to address the effects of multiple reflections between the vessel wall and the plasma boundary. A significant increase in conversion efficiency is observed as a result.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ECRH System For ITER

A 26 MW Electron Cyclotron Heating and Current Drive (EC H and CD) system is to be installed for ITER. The main objectives are to provide, start-up assist, central H and CD and control of MHD activity. These are achieved by a combination of two types of launchers, one located in an equatorial port and the second type in four upper ports. The physics applications are partitioned between the two launchers, based on the deposition location and driven current profiles. The equatorial launcher (EL) will access from the plasma axis to mid radius with a relatively broad profile useful for central heating and current drive applications, while the upper launchers (ULs) will access roughly the outer half of the plasma radius with a very narrow peaked profile for the control of the Neoclassical Tearing Modes (NTM) and sawtooth oscillations. The EC power can be switched between launchers on a time scale as needed by the immediate physics requirements. A revision of all injection angles of all launchers is under consideration for increased EC physics capabilities while relaxing the engineering constraints of both the EL and ULs. A series of design reviews are being planned with the five parties (EU, IN, JA, RF, US) procuring the EC system, the EC community and ITER Organization (IO). The review meetings qualify the design and provide an environment for enhancing performances while reducing costs, simplifying interfaces, predicting technology upgrades and commercial availability. In parallel, the test programs for critical components are being supported by IO and performed by the Domestic Agencies (DAs) for minimizing risks. The wide participation of the DAs provides a broad representation from the EC community, with the aim of collecting all expertise in guiding the EC system optimization. Still a strong relationship between IO and the DA is essential for optimizing the design of the EC system and for the installation and commissioning of all ex-vessel components when several teams from several DAs will be involved together in the tests on the ITER site.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron Cyclotron Heating in RFP plasmas

Reversed field pinches (RFP) plasmas are typically overdense ({omega}{sub pe}>{omega}{sub ce}) and thus not suitable for conventional electron cyclotron (EC) heating and current drive. In recent high plasma current discharges (I{sub p}>1.5 MA), however, the RFX-mod device was operated in underdense conditions ({omega}{sub pe}<{omega}{sub ce}) for the first time in an RFP. Thus, it is now possible to envisage heating the RFP plasma core by conventional EC at the 2nd harmonic, in the ordinary or extraordinary mode. We present a preliminary study of EC-heating feasibility in RFX-mod with the use of beam-tracing and full-wave codes. Although not competitive - as a heating system - with multi-MW Ohmic heating in an RFP, EC might be useful for perturbative transport studies, even at moderate power (hundreds of kW), and, more generally, for applications requiring localized power deposition.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗