Engineering topics
Farnocchia, Davide
Publications and source records attributed to Farnocchia, Davide.
Juno Orbit Determination Experience During First Year At Jupiter
The Juno spacecraft successfully inserted into a polar orbit around Jupiter on 5- July-2016. Since the Jupiter Orbit Insertion (JOI) maneuver, Juno has completed six orbits around Jupiter. The mission plan at the time of JOI was for Juno to perform two 53.5-day capture orbits before executing a Period Reduction Maneuver (PRM) to place the spacecraft into its intended 14-day science orbit. This maneuver was canceled due to a concern with the propulsion system. As a result, the Juno spacecraft will remain in its longer orbit period for rest of its mission. This paper discusses the Navigation Team’s experience: the orbit determination strategy and how it changed due to the cancellation of the PRM, challenges fitting the data during perijove, and how we reconstructed the trajectory during Juno’s first year in orbit.
B-plane Evolution Under Highly Non-Keplerian Dynamics
Juno is the second of a series of New Frontiers missions and was launched in 2011. The spacecraft was set en route to Jupiter, and its Jupiter Orbit Insertion occurred on 2016-07-04 after a five-year cruise in deep space. The mission phase just prior to this large maneuver is called approach. As navigation team, we were responsible for precise orbit determination of the Juno spacecraft to ensure a successful orbit insertion. To evaluate the navigation performance we employed the B-plane mapping, where the incoming hyperbolic velocity defines the plane perpendicular to it, and the time to go to hit the plane will directly map into the uncertainties of the target point. The B-plane is a convenient tool when assessing the navigation performance as it is not affected by non-linearities due to the gravitational pull of the targeted body. However, as the Jupiter Orbit Insertion approached we started to realize that the B-plane mapping uncertainties were significantly larger than expected. We found that the B-plane mapping time had tremendous influence on the covariance inflation in the B-plane. Because of the close approach distance during the Jupiter Orbit Insertion and the strong interaction with J2 spherical harmonic coefficient, the Juno dynamics were too far from a Keplerian one assumed for the B-plane mapping. We first discuss the analytical approach of the B-plane mapping uncertainty and perform a numerical analysis to isolate the components of the Juno dynamics that cause the B-plane covariance inflation.
JUNO navigation for Jupiter orbit insertion
Juno arrived at Jupiter on 05 July 2016 UTC, achieving orbit with the execution of the Jupiter Orbit Insertion (JOI) maneuver. Thanks to a dynamically wellbehaved spacecraft, the delivery of Juno to JOI was done largely with only a maneuver to setup and Earth gravity assist (EGA), an EGA, an EGA clean-up maneuver, and a JOI targeting maneuver. During the last several weeks of the approach to JOI, the dominant uncertainties in the predicted trajectory were from the Jupiter barycenter ephemeris. In this paper, we discuss the maneuver and orbit determination (OD) strategy for successfully arriving at JOI, the the challenges of calculating a correction to the Jupiter barycenter ephemeris using only radiometric data types, and how the ephemeris estimates during approach to JOI compare to a post-JOI trajectory reconstruction.
A STUDY OF DUST AND GAS AT MARS FROM COMET C/2013 A1 (SIDING SPRING)
Although the nucleus of comet C/2013 A1 (Siding Spring) will safely pass Mars in 2014 October, the dust in the coma and tail will more closely approach the planet. Using a dynamical model of comet dust, we estimate the impact fluence. Based on our nominal model no impacts are expected at Mars. Relaxing our nominal model's parameters, the fluence is no greater than ∼10{sup –7} grains m{sup –2} for grain radii larger than 10 μm. Mars-orbiting spacecraft are unlikely to be impacted by large dust grains, but Mars may receive as many as ∼10{sup 7} grains, or ∼100 kg of total dust. We also estimate the flux of impacting gas molecules commonly observed in comet comae.
Trajectory analysis for the nucleus and dust of comet C/2013 A1 (Siding Spring)
Comet C/2013 A1 (Siding Spring) will experience a high velocity encounter with Mars on 2014 October 19 at a distance of 135,000 km ± 5000 km from the planet center. We present a comprehensive analysis of the trajectory of both the comet nucleus and the dust tail. The nucleus of C/2013 A1 cannot impact on Mars even in the case of unexpectedly large nongravitational perturbations. Furthermore, we compute the required ejection velocities for the dust grains of the tail to reach Mars as a function of particle radius and density and heliocentric distance of the ejection. A comparison between our results and the most current modeling of the ejection velocities suggests that impacts are possible only for millimeter to centimeter size particles released more than 13 AU from the Sun. However, this level of cometary activity that far from the Sun is considered extremely unlikely. The arrival time of these particles spans a 20-minute time interval centered at 2014 October 19 at 20:09 TDB, i.e., around the time that Mars crosses the orbital plane of C/2013 A1. Ejection velocities larger than currently estimated by a factor >2 would allow impacts for smaller particles ejected as close as 3 AU from the Sun. These particles would reach Mars from 19:13 TDB to 20:40 TDB.
DELIVERY OF DUST GRAINS FROM COMET C/2013 A1 (SIDING SPRING) TO MARS
Comet C/2013 A1 (Siding Spring) will have a close encounter with Mars on 2014 October 19. We model the dynamical evolution of dust grains from the time of their ejection from the comet nucleus to the close encounter with Mars, and determine the flux at Mars. Constraints on the ejection velocity from Hubble Space Telescope observations indicate that the bulk of the grains will likely miss Mars, although it is possible that a few percent of the grains with higher velocities will reach Mars, peaking approximately 90-100 minutes after the close approach of the nucleus, and consisting mostly of millimeter-radius grains ejected from the comet nucleus at a heliocentric distance of approximately 9 AU or larger. At higher velocities, younger grains from submillimeter to several millimeters can also reach Mars, although an even smaller fraction of grains is expected have these velocities, with negligible effect on the peak timing. Using NEOWISE observations of the comet, we can estimate that the maximum fluence will be of the order of 10{sup –7} grains m{sup –2}. We include a detailed analysis of how the expected fluence depends on the grain density, ejection velocity, and size-frequency distribution, to account for current model uncertainties and in preparation of possible refined model values in the near future.