Search NASA⌕ Search

Engineering topics

Farr, Rebecca A.

Publications and source records attributed to Farr, Rebecca A..

On the Comparison of the Long Penetration Mode (LPM) Supersonic Counterflowing Jet to the Supersonic Screech Jet

Classic tonal screech noise created by under-expanded supersonic jets; Long Penetration Mode (LPM) supersonic phenomenon -Under-expanded counter-flowing jet in supersonic free stream -Demonstrated in several wind tunnel tests -Modeled in several computational fluid dynamics (CFD) simulations; Discussion of LPM acoustics feedback and fluid interactions -Analogous to the aero-acoustics interactions seen in screech jets; Lessons Learned: Applying certain methodologies to LPM -Developed and successfully demonstrated in the study of screech jets -Discussion of mechanically induced excitation in fluid oscillators in general; Conclusions -Large body of work done on jet screech, other aero-acoustic phenomenacan have direct application to the study and applications of LPM cold flow jets

Farr, Rebecca A.↗

On the Comparison of the Long Penetration Mode (LPM) Supersonic Counterflowing Jet to the Supersonic Screech Jet

The authors provide a brief overview of the classic tonal screech noise problem created by underexpanded supersonic jets, briefly describing the fluid dynamic-acoustics feedback mechanism that has been long established as the basis for this well-known aeroacoustics problem. This is followed by a description of the Long Penetration Mode (LPM) supersonic underexpanded counterflowing jet phenomenon which has been demonstrated in several wind tunnel tests and modeled in several computational fluid dynamics (CFD) simulations. The authors provide evidence from test and CFD analysis of LPM that indicates that acoustics feedback and fluid interaction seen in LPM are analogous to the aeroacoustics interactions seen in screech jets. Finally, the authors propose applying certain methodologies to LPM which have been developed and successfully demonstrated in the study of screech jets and mechanically induced excitation in fluid oscillators for decades. The authors conclude that the large body of work done on jet screech, other aeroacoustic phenomena, and fluid oscillators can have direct application to the study and applications of LPM counterflowing supersonic cold flow jets.

Farr, Rebecca A.↗

Comparison of the Effects of using Tygon Tubing in Rocket Propulsion Ground Test Pressure Transducer Measurements

This paper documents acoustics environments data collected during liquid oxygen- ethanol hot-fire rocket testing at NASA Marshall Space Flight Center in November- December 2003. The test program was conducted during development testing of the RS-88 development engine thrust chamber assembly in support of the Orbital Space Plane Crew Escape System Propulsion Program Pad Abort Demonstrator. In addition to induced environments analysis support, coincident data collected using other sensors and methods has allowed benchmarking of specific acoustics test measurement methodologies during propulsion tests. Qualitative effects on data characteristics caused by using tygon sense lines of various lengths in pressure transducer measurements is discussed here.

Farr, Rebecca A.↗

The Business Case for Spiral Development in Heavy Lift Launch Vehicle Systems

Performance capabilities of a specific combination of the Space Shuttle external tank and various liquid engines in an in-line configuration, two-stage core vehicle with multiple redesigned solid rocket motor strap-ons are reexamined. This concept proposes using existing assets, hardware, and capabilities that are already crew-rated, flight certified, being manufactured under existing contracts, have a long history of component and system ground testing, and have been flown for over 20 yr. This paper goes beyond describing potential performance capabilities of specific components to discuss the overall system feasibility-from end to end, start to finish-describing the inherent cost advantages of the Spiral Development concept, which builds on existing capabilities and assets, as opposed to starting up a "fresh sheet" heavy-lift launch vehicle program from scratch.

Farr, Rebecca A.↗

The 2003 Goddard Rocket Replica Project

A group of volunteers from Marshall Space Flight Center using information and records available,construct a working, flying replica of Robert Goddard's 1926 liquid rocket as well as accurate static display version. Document the effort for posterity.

Farr, Rebecca A.↗

Time accurate Navier-Stokes computations of solid rocket motor internal field joint cavity flows

The low-speed flow of combustion gases in the Space Shuttle Solid Rocket Motor (SRM) following ignition are investigated with a time-accurate CFD technique. The flow of the combustion gases is examined in the forward joint section of the SRM at 80 s after ignition with attention given to the amplification of existing 'organ-pipe' modes of 15, 30, and 45 Hz resulting from frequency lock-in with vortex-shedding modes. The CFD code employed is a multizone compressible Navier-Stokes flow solver using a finite-volume, upwind-biased, total-variation-diminishing scheme. The vortex-generated oscillations generated by the inhibitor and the cavity at the forward field joint are described in terms of amplitude and frequency and related to the flow dynamics in the SRM. Oscillations are shown to occur spontaneously when the trailing edge of the cavity at the joint is sharp and can be amplified if the unburned portion of the inhibitor protrudes into the flow.

Farr, Rebecca A.↗

Time-accurate Navier-Stokes computations of self-excited two-dimensional unsteady cavity flows

Time-accurate Navier Stokes computations were performed to study self-excited oscillatory shear layer behavior over a two-dimensional rectangular cavity and to gain insight into the vortex-acoustic coupling that sustains these oscillations. Results were obtained solving the full, unsteady compressible Navier-Stokes equations for Reynolds-averaged turbulent air flow past a cavity with L/d = 2. Conditions duplicated test conditions in experiments by Rossiter at Mach numbers varied from 0.6 to 1.2. The computational scheme was the USA 2D series code developed by Rockwell's Science Center with an algebraic turbulence model for the shear layer and recirculating region. Two physical conditions were simulated: an isolated cavity situated (1) in an infinite plane wall and (2) in an infinite channel with an opposing parallel wall. Computed results for (1) showed excellent agreement with Rossiter's measured amplitudes and frequencies. A tuned acoustic duct resonance effect was observed in (2), demonstrating a controlled change in the acoustic feedback mechanism and resultant amplification in computed oscillations.

Dougherty, N. Sam↗

RS-88 Pad Abort Demonstrator Thrust Chamber Assembly Testing at NASA Marshall Space Flight Center

This paper documents the effort conducted to collect hot-tire dynamic and acoustics environments data during 50,000-lb thrust lox-ethanol hot-fire rocket testing at NASA Marshall Space Flight Center (MSFC) in November-December 2003. This test program was conducted during development testing of the Boeing Rocketdyne RS-88 development engine thrust chamber assembly (TCA) in support of the Orbital Space Plane (OSP) Crew Escape System Propulsion (CESP) Program Pad Abort Demonstrator (PAD). In addition to numerous internal TCA and nozzle measurements, induced acoustics environments data were also collected. Provided here is an overview of test parameters, a discussion of the measurements, test facility systems and test operations, and a quality assessment of the data collected during this test program.

Farr, Rebecca A.↗