Search NASA⌕ Search

Engineering topics

Fast, Jerome D.

Publications and source records attributed to Fast, Jerome D..

At least 37 records · Page 2

Capturing plume behavior in complex terrain: an overview of the Nevada National Security Site Meteorological Experiment (METEX21)

METEX21 was an atmospheric tracer release experiment executed at the Department of Energy’s Nevada National Security Site (NNSS) in the southwestern U.S to study terrain-induced wind and thermodynamic conditions that influence local-scale (<5-km) plume transport under varying atmospheric forcing conditions. Meteorological observations were collected using 10-m tall meteorological towers, 2-m tall tripods with 3-d sonic anemometers, a 3-m tall eddy covariance flux tower, Doppler profiling lidars, Doppler scanning lidars, weather-balloon launched radiosondes, and a tethered balloon equipped with wind, temperature, and aerosol sensors at heights up to 800 m. A smoke tracer was released along three transects in the horizontal and vertical directions and observed with video cameras, aerosol sensors and lidars (via aerosol backscatter). The observations showed evidence of large-scale/synoptic transience as well as local-scale upslope and downslope flows, along-axis valley flows, recirculation eddies on leeward slopes, and periods of strong shear and veer aloft. The release days were classified as either synoptically-driven or locally-driven, and a single case day is presented in detail for each. Synoptically-forced days show relatively narrow smoke plumes traveling down the valley from north to south (with the predominant wind direction), with little deviation in transport direction regardless of the elevation or ground locations of the smoke releases, except near the presence of leeside recirculation eddies. Locally-forced days exhibit a wider range of plume behavior due to the combination of thermally-induced valley and slope flows, which are often flowing in different cardinal directions, and wind shear found aloft at higher altitudes and elevations. We saw evidence of smoke lofting on top of the mesas due to strong upslope flows on these days. A major finding of this experiment was the effectiveness of scanning lidars to measure 2-dimensional plume transport out to a 2–3 km distance; much farther than could be visibly observed. METEX21 was the first of three planned tracer experiments at NNSS, and future experiments will incorporate multiple tracers to improve individual plume identification so that finer resolution flow details can be attained from these measurements, as well as deploy a larger suite of meteorological instrumentation, including more temperature profiling data.

54 ENVIRONMENTAL SCIENCES↗

Earth System Model Aerosol–Cloud Diagnostics (ESMAC Diags) package, version 2: assessing aerosols, clouds, and aerosol–cloud interactions via field campaign and long-term observations

Abstract. Poor representations of aerosols, clouds, and aerosol–cloud interactions (ACIs) in Earth system models (ESMs) have long been the largest uncertainties in predicting global climate change. Huge efforts have been made to improve the representation of these processes in ESMs, and the key to these efforts is the evaluation of ESM simulations with observations. Most well-established ESM diagnostics packages focus on the climatological features; however, they lack process-level understanding and representations of aerosols, clouds, and ACIs. In this study, we developed the Earth System Model Aerosol–Cloud Diagnostics (ESMAC Diags) package to facilitate the routine evaluation of aerosols, clouds, and ACIs simulated the Energy Exascale Earth System Model (E3SM) from the US Department of Energy (DOE). This paper documents its version 2 functionality (ESMAC Diags v2), which has substantial updates compared with version 1 (Tang et al., 2022a). The simulated aerosol and cloud properties have been extensively compared with in situ and remote-sensing measurements from aircraft, ship, surface, and satellite platforms in ESMAC Diags v2. It currently includes six field campaigns and two permanent sites covering four geographical regions: the eastern North Atlantic, the central US, the northeastern Pacific, and the Southern Ocean. These regions produce frequent liquid- or mixed-phase clouds, with extensive measurements available from the DOE Atmospheric Radiation Measurement user facility and other agencies. ESMAC Diags v2 generates various types of single-variable and multivariable diagnostics, including percentiles, histograms, joint histograms, and heatmaps, to evaluate the model representation of aerosols, clouds, and ACIs. Select examples highlighting the capabilities of ESMAC Diags are shown using E3SM version 2 (E3SMv2). In general, E3SMv2 can reasonably reproduce many observed aerosol and cloud properties, with biases in some variables such as aerosol particle and cloud droplet sizes and number concentrations. The coupling of aerosol and cloud number concentrations may be too strong in E3SMv2, possibly indicating a bias in processes that control aerosol activation. Furthermore, the liquid water path response to a perturbed cloud droplet number concentration behaves differently in E3SMv2 and observations, which warrants further study to improve the cloud microphysics parameterizations in E3SMv2.

54 ENVIRONMENTAL SCIENCES↗

Generalized Aerosol/Chemistry Interface (GIANT): A Community Effort to Advance Collaborative Science across Weather and Climate Models

Atmospheric aerosol and chemistry modules are key elements in Earth system models (ESMs), as they predict air pollutant concentrations and properties that can impact human health, weather, and climate. The current uncertainty in climate projections is partly due to the inaccurate representation of aerosol direct and indirect forcing. Aerosol/chemistry parameterizations used within ESMs and other atmospheric models span large structural and parameter uncertainties that are difficult to assess independently of their host models. Moreover, there is a strong need for a standardized interface between aerosol/chemistry modules and the host model to facilitate portability of aerosol/chemistry parameterizations from one model to another, allowing not only a comparison between different parameterizations within the same modeling framework, but also quantifying the impact of different model frameworks on aerosol/chemistry predictions. To address this need, we have initiated a new community effort to coordinate the construction of a Generalized Aerosol/Chemistry Interface (GIANT) for use across weather and climate models. We aim to organize a series of community workshops and hackathons to design and build GIANT, which will serve as the interface between a range of aerosol/chemistry modules and the physics and dynamics components of atmospheric host models. GIANT will leverage ongoing efforts at the U.S. modeling centers focused on building next-generation ESMs and the international AeroCom initiative to implement this common aerosol/chemistry interface. GIANT will create transformative opportunities for scientists and students to conduct innovative research to better characterize structural and parametric uncertainties in aerosol/chemistry modules, and to develop a common set of aerosol/chemistry parameterizations.

54 ENVIRONMENTAL SCIENCES↗

Substantially positive contributions of new particle formation to cloud condensation nuclei under low supersaturation in China based on numerical model improvements

New particle formation (NPF) and subsequent particle growth are important sources of condensation nuclei (CN) and cloud condensation nuclei (CCN). While many observations have shown positive contributions of NPF to CCN at low supersaturation, negative NPF contributions were often simulated in polluted environments. Using the observations in a coastal city of Qingdao, Beijing, and Gucheng in north China, we thoroughly evaluate the simulated number concentrations of CN and CCN using an NPF-explicit parameterization embedded in the WRF-Chem model. For CN, the initial simulation shows large biases of particle number concentrations at 10–40 and 40–100 nm. By adjusting the process of gas–particle partitioning, including the mass accommodation coefficient (MAC) of sulfuric acid, the phase changes in primary organic aerosol emissions, and the condensational amount of nitric acid, the improvement of the particle growth process yields substantially reduced overestimation of CN. Regarding CCN, secondary organic aerosol (SOA) formed from the oxidation of semi-volatile and intermediate-volatility organic compounds (S/IVOCs) is called SI-SOA, the yield of which is an important contributor. At default settings, the SI-SOA yield is too high without considering the differences in precursor oxidation rates. Lowering the SI-SOA yield under linear H 2 SO 4 nucleation scheme results in much-improved CCN simulations compared to observations. On the basis of the bias-corrected model, we find substantially positive contributions of NPF to CCN at low supersaturation (~ 0.2 %) over broad areas of China, primarily due to competing effects of increasing particle hygroscopicity, a result of reductions in SI-SOA amount, surpassing that of particle size decreases. The bias-corrected model is robustly applicable to other schemes, such as the quadratic H 2 SO 4 nucleation scheme, in terms of CN and CCN, though the dependence of CCN on SI-SOA yield is diminished likely due to changes in particle composition. This study highlights potentially much larger NPF contributions to CCN on a regional and even global basis.

54 ENVIRONMENTAL SCIENCES↗

Observational study of relationships between entrainment rate, homogeneity of mixing, and cloud droplet relative dispersion

The entrainment–mixing process is key to the cloud’s dynamical and microphysical processes. However, to the best of our knowledge, no study has quantitatively linked entrainment rate and homogeneity of mixing. Additionally, their combined effects on cloud droplet relative dispersion and physical mechanisms are even more unclear. This study analyzed the aircraft measurements of cumulus clouds collected in the Holistic Interactions of Shallow Clouds, Aerosols, and Land-Ecosystems field campaign to identify these relationships. The relationship between the entrainment rate and homogeneous mixing degree was found to be moderately positive, and the underlying mechanisms related to mixing and evaporation time scales and environmental relative humidity were explored. The relationship between relative dispersion and entrainment rate changes from positive to negative with increasing entrainment rate, depending on the dominance of evaporation of large or small droplets. The relative dispersion first increases and then decreases with increasing homogeneous mixing degree, validating the results of previous model simulations. Further, the results shed new light on understanding the interactions between cloud microphysics and cloud dynamics through turbulent entrainment and mixing processes.

54 ENVIRONMENTAL SCIENCES↗

Shift in Peaks of PAH-Associated Health Risks From East Asia to South Asia and Africa in the Future

Lung cancer risk from exposure to ambient polycyclic aromatic hydrocarbons (PAHs) is expected to change significantly by 2050 compared to 2008 due to changes in climate and emissions. Integrating a global atmospheric chemistry model, a lung cancer risk model, and plausible future emissions trajectories of PAHs, we assess how global PAHs and their associated lung cancer risk will likely change in the future. Benzo(a)pyrene (BaP) is used as an indicator of cancer risk from PAH mixtures. From 2008 to 2050, the population-weighted global average BaP concentrations under all RCPs consistently exceeded the WHO-recommended limits, primarily attributed to residential biofuel use. Peaks in PAH-associated incremental lifetime cancer risk shift from East Asia (4 × 10 –5 ) in 2008 to South Asia (mostly India, 2–4 × 10 –5 ) and Africa (1–2 × 10 –5 ) by 2050. In the developing regions of Africa and South Asia, PAH-associated lung cancer risk increased by 30–64% from 2008 to 2050, due to increasing residential energy demand in households for cooking, heating, and lighting, the continued use of traditional biomass use, increases in agricultural waste burning, and forest fires, accompanied by rapid population growth in these regions. Due to more stringent air quality policies in developed countries, their PAH lung cancer risk substantially decreased by ~80% from 2008 to 2050. Climate change is likely to have minor effects on PAH lung cancer risk compared to the impact of emissions. Future policies, therefore, need to consider efficient combustion technologies that reduce air pollutant emissions, including incomplete combustion products such as PAH.

54 ENVIRONMENTAL SCIENCES↗

Evaluation of aerosol–cloud interactions in E3SM using a Lagrangian framework

A Lagrangian framework is used to evaluate aerosol–cloud interactions in the U.S. Department of Energy's Energy Exascale Earth System Model (E3SM) version 1 (E3SMv1) for measurements taken at Graciosa Island in the Azores where a U.S. Department of Energy Atmosphere Radiation Measurement (ARM) site is located. This framework uses direct measurements of cloud condensation nuclei (CCN) concentration (instead of relying on satellite retrievals of aerosol optical depth) and incorporates a suite of ground-based ARM measurements, satellite retrievals, and meteorological reanalysis products that when applied to over a 1500 trajectories provides key insights into the evolution of low-level clouds and aerosol radiative forcing that is not feasible from a traditional Eulerian analysis framework. Significantly lower concentrations (40 %) of surface CCN concentration are measured when precipitation rates in 48 h back trajectories average above 1.2 mm d -1 in the Integrated Multi-satellitE Retrievals for Global Precipitation Measurement (IMERG) product. The depletion of CCN concentration when precipitation rates are elevated is nearly twice as large in the ARM observations compared to E3SMv1 simulations. The model CCN concentration bias remains significant despite modifying the autoconversion and accretion rates in warm clouds. As the clouds in trajectories associated with larger surface-based CCN concentration advect away from Graciosa Island, they maintain higher values of droplet number concentrations (N d ) over multiple days in observations and E3SM simulations compared to trajectories that start with lower CCN concentrations. The response remains robust even after controlling for meteorological factors such as lower troposphere stability, the degree of cloud coupling with the surface, and island wake effects. E3SMv1 simulates a multi-day aerosol effect on clouds and a Twomey radiative effect that is within 30 % of the ARM and satellite observations. However, the mean cloud droplet concentration is more than 2–3 times larger than in the observations. While Twomey radiative effects are similar amongst autoconversion and accretion sensitivity experiments, the liquid water path and cloud fraction adjustments are positive when using a regression model as opposed to negative when using the present-day minus pre-industrial aerosol emissions approach. This result suggests that tuning the autoconversion and accretion alone is unlikely to produce the desired aerosol susceptibilities in E3SMv1.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Role of Cloud–Cloud Interactions in the Life Cycle of Shallow Cumulus Clouds

Some of the climate research puzzles relate to a limited understanding of the critical factors governing the life cycle of cumulus clouds. These factors force the initiation and the various mixing processes during cloud life cycles. To shed some light into these processes, we tracked the life cycle of thousands of individual shallow cumulus clouds in a large-eddy simulation during the Holistic Interactions of Shallow Clouds, Aerosols, and Land-Ecosystems field campaign in the U.S. southern Great Plains. Concurrent evolution of clouds is tracked and their respective neighboring clouds are examined. Results show that the clouds initially smaller than neighboring clouds can grow larger than the neighboring clouds by a factor of 2 within 20% of their lifetime. Two groups of the tracked clouds with growing and decaying neighboring clouds, respectively, show distinct characteristics in their life cycles. Clouds with growing neighboring clouds form above regions with larger surface heterogeneity, whereas clouds with decaying neighboring clouds are associated with less heterogeneous surfaces. Also, those with decaying neighboring clouds experience larger instability and a more humid boundary layer, indicating evaporation below the cloud base is likely occurring before those clouds are formed. Larger instability leads to higher vertical velocity and convergence within the cloud, which causes stronger surrounding downdrafts and water vapor removal in the surrounding area. The latter appears to be the reason for the decaying neighboring clouds. Finally, understanding those processes provide insights into how cloud–cloud interactions modulate the evolution of cloud population and into how this evolution can be represented in future cumulus parameterizations.

54 ENVIRONMENTAL SCIENCES↗

Look Up: Probing the Vertical Profile of New Particle Formation and Growth in the Planetary Boundary Layer With Models and Observations

Abstract The processes of new particle formation (NPF) and growth are important contributors to cloud condensation nuclei (CCN) concentrations, and CCN are important for climate from their impact on planetary radiative forcing. While the general ubiquity and importance of NPF is understood, the vertical extent and governing mechanisms of NPF and growth in the lower troposphere are uncertain. We present an analysis of four NPF events and two non‐NPF events during the HI‐SCALE field campaign at the Southern Great Plains observatory in Oklahoma, USA. First, we analyzed airborne and ground‐based observations of aerosol and gas‐phase properties. Second, we used a column aerosol chemistry and microphysics model to probe factors that influence the vertical profile of NPF. During HI‐SCALE, we found several instances of enhanced NPF occurring several hundred meters above the surface; however, the spatio‐temporal characteristics of the observed NPF made comparisons between airborne‐ and ground‐based observations difficult. The model represented the observed NPF (or lack of NPF) and particle growth at the surface to final diameters within 10 nm. The model predicted enhanced NPF rates in the upper mixed layer, and this enhancement is primarily due to the temperature dependence in the NPF schemes, but this was also dependent on the vertical profile of gas‐phase precursors measured during HI‐SCALE. We found vertical mixing in the model either enhanced or suppressed NPF rates, aerosol number concentrations, and particle growth rates at the surface. Finally, our analysis provides insights for future field campaigns and modeling efforts investigating the vertical profile of NPF.

54 ENVIRONMENTAL SCIENCES↗

Formation Process of Particles and Cloud Condensation Nuclei Over the Amazon Rainforest: The Role of Local and Remote New-Particle Formation

Understanding the formation processes of particles and cloud condensation nuclei (CCN) in pristine environments is a major challenge in accurately assessing anthropogenic radiative forcing. Here, using a state-of-the-art model that systematically simulates the chemical processes controlling new-particle formation (NPF) and multi-scale chemical transport, we find that NPF contributes ~90% of the particle number and ~80% of the CCN at 0.5% supersaturation (CCN0.5%) in the pristine Amazon boundary layer during the wet season. The corresponding contributions are only ~30% and ~20% during the dry season because of prevalent biomass burning. In both seasons, about half of the NPF-induced particles and ~85% of the NPF-induced CCN0.5% in the boundary layer originate from the long-range transport of new particles formed hundreds to thousands of kilometers away. Moreover, about 50–65% of the NPF-induced particles and 35–50% of the NPF induced CCN0.5% originate from the downward transport of new particles formed in the free troposphere.

54 ENVIRONMENTAL SCIENCES↗

Using aircraft measurements to characterize subgrid-scale variability of aerosol properties near the Atmospheric Radiation Measurement Southern Great Plains site

Abstract. Complex distributions of aerosol properties evolve in space and time as a function of emissions, new particle formation, coagulation, condensational growth, chemical transformation, phase changes, turbulent mixing and transport, removal processes, and ambient meteorological conditions. The ability of chemical transport models to represent the multi-scale processes affecting the life cycle of aerosols depends on their spatial resolution since aerosol properties are assumed to be constant within a grid cell. Subgrid-scale-dependent processes that affect aerosol populations could have a significant impact on the formation of particles, their growth to cloud condensation nuclei (CCN) sizes, aerosol–cloud interactions, dry deposition and rainout and hence their burdens, lifetimes, and radiative forcing. To address this issue, we characterize subgrid-scale variability in terms of measured aerosol number, size, composition, hygroscopicity, and CCN concentrations made by repeated aircraft flight paths over the Atmospheric Radiation Measurement (ARM) program's Southern Great Plains (SGP) site during the Holistic Interactions of Shallow Clouds, Aerosols and Land Ecosystem (HI-SCALE) campaign. Subgrid variability is quantified in terms of both normalized frequency distributions and percentage difference percentiles using grid spacings of 3, 9, 27, and 81 km that represent those typically used by cloud-system-resolving models as well as the current and next-generation climate models. Even though the SGP site is a rural location, surprisingly large horizontal gradients in aerosol properties were frequently observed. For example, 90 % of the 3, 9, and 27 km cell mean organic matter concentrations differed from the 81 km cell around the SGP site by as much as ∼ 46 %, large spatial variability in aerosol number concentrations and size distributions were found during new particle formation events, and consequently 90 % of the 3, 9, and 27 km cell mean CCN number concentrations differed from the 81 km cell mean by as much as ∼ 38 %. The spatial variability varied seasonally for some aerosol properties, with some having larger spatial variability during the spring and others having larger variability during the late summer. While measurements at a single surface site cannot reflect the surrounding variability of aerosol properties at a given time, aircraft measurements that are averaged within an 81 km cell were found to be similar to many, but not all, aerosol properties measured at the ground SGP site. This analysis suggests that it is reasonable to directly compare most ground SGP site aerosol measurements with coarse global climate model predictions. In addition, the variability quantified by the aircraft can be used as an uncertainty range when comparing the surface point measurements with model predictions that use coarse grid spacings.

54 ENVIRONMENTAL SCIENCES↗

Observational data from uncrewed systems over Southern Great Plains

Uncrewed Systems (UxS), including uncrewed aerial systems (UAS) and tethered balloon/kite systems (TBS), are significantly expanding observational capabilities in atmospheric science. Rapid adaptation of these platforms and the advancement of miniaturized instruments have resulted in an expanding number of data sets captured under various environmental conditions by the Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility. In 2021, observational data collected using ARM UxS platforms, including seven TigerShark UAS flights and 133 tethered balloon system (TBS) flights, were archived by the ARM Data Center and made publicly available to the user community https://adc.arm.gov/discovery/#/results/s::sgp*U3 and https://adc.arm.gov/discovery/#/results/s::sgp*tbs. These data streams provide new perspectives on spatial variability of atmospheric and surface parameters, helping to address critical science questions in Earth system science research. This manuscript describes the DOE UAS/TBS datasets, including information on the acquisition, collection, and quality control processes, and highlights the potential scientific contributions using UAS and TBS platforms.

54 ENVIRONMENTAL SCIENCES↗

Earth System Model Aerosol–Cloud Diagnostics (ESMAC Diags) package, version 1: assessing E3SM aerosol predictions using aircraft, ship, and surface measurements

Abstract. An Earth system model (ESM) aerosol–cloud diagnostics package is developed to facilitate the routine evaluation of aerosols, clouds, and aerosol–cloud interactions simulated by the Energy Exascale Earth System Model (E3SM) from the US Department of Energy (DOE). The first version focuses on comparing simulated aerosol properties with aircraft, ship, and surface measurements, which are mostly measured in situ. The diagnostics currently cover six field campaigns in four geographical regions: eastern North Atlantic (ENA), central US (CUS), northeastern Pacific (NEP), and Southern Ocean (SO). These regions produce frequent liquid- or mixed-phase clouds, with extensive measurements available from the Atmospheric Radiation Measurement (ARM) program and other agencies. Various types of diagnostics and metrics are performed for aerosol number, size distribution, chemical composition, cloud condensation nuclei (CCN) concentration, and various meteorological quantities to assess how well E3SM represents observed aerosol properties across spatial scales. Overall, E3SM qualitatively reproduces the observed aerosol number concentration, size distribution, and chemical composition reasonably well, but it overestimates Aitken-mode aerosols and underestimates accumulation-mode aerosols over the CUS and ENA regions, suggesting that processes related to particle growth or coagulation might be too weak in the model. The current version of E3SM struggles to reproduce the new particle formation events frequently observed over both the CUS and ENA regions, indicating missing processes in current parameterizations. The diagnostics package is coded and organized in a way that can be extended to other field campaign datasets and adapted to higher-resolution model simulations.

54 ENVIRONMENTAL SCIENCES↗

Better calibration of cloud parameterizations and subgrid effects increases the fidelity of the E3SM Atmosphere Model version 1

Abstract. Realistic simulation of the Earth's mean-state climate remains a major challenge, and yet it is crucial for predicting the climate system in transition. Deficiencies in models' process representations, propagation of errors from one process to another, and associated compensating errors can often confound the interpretation and improvement of model simulations. These errors and biases can also lead to unrealistic climate projections and incorrect attribution of the physical mechanisms governing past and future climate change. Here we show that a significantly improved global atmospheric simulation can be achieved by focusing on the realism of process assumptions in cloud calibration and subgrid effects using the Energy Exascale Earth System Model (E3SM) Atmosphere Model version 1 (EAMv1). The calibration of clouds and subgrid effects informed by our understanding of physical mechanisms leads to significant improvements in clouds and precipitation climatology, reducing common and long-standing biases across cloud regimes in the model. The improved cloud fidelity in turn reduces biases in other aspects of the system. Furthermore, even though the recalibration does not change the global mean aerosol and total anthropogenic effective radiative forcings (ERFs), the sensitivity of clouds, precipitation, and surface temperature to aerosol perturbations is significantly reduced. This suggests that it is possible to achieve improvements to the historical evolution of surface temperature over EAMv1 and that precise knowledge of global mean ERFs is not enough to constrain historical or future climate change. Cloud feedbacks are also significantly reduced in the recalibrated model, suggesting that there would be a lower climate sensitivity when it is run as part of the fully coupled E3SM. This study also compares results from incremental changes to cloud microphysics, turbulent mixing, deep convection, and subgrid effects to understand how assumptions in the representation of these processes affect different aspects of the simulated atmosphere as well as its response to forcings. We conclude that the spectral composition and geographical distribution of the ERFs and cloud feedback, as well as the fidelity of the simulated base climate state, are important for constraining the climate in the past and future.

54 ENVIRONMENTAL SCIENCES↗

Effects of Horizontal Resolution, Domain Size, Boundary Conditions, and Surface Heterogeneity on Coarse LES of a Convective Boundary Layer

Atmospheric properties in a convective boundary layer vary over a wide range of spatial scales and are commonly studied using large-eddy simulations (LES) in various configurations. We examine how the boundary layer depth and distribution of variability across scales are affected by LES grid spacing, domain size, inhomogeneity of surface properties, and external forcing. Two different setups of the Weather Research and Forecasting (WRF) model are analyzed. A semi-idealized configuration uses a periodic domain, flat surface, prescribed homogeneous surface heat fluxes, and horizontally uniform profiles of large-scale advective tendencies. A nested LES setup employs a larger domain and realistic initial and boundary conditions, including an interactive land surface model with representative topography and vegetation and soil types. Subdomains of identical size are analyzed for all simulations. Characteristic structure sizes are quantified using the variability scales L 50 and L 95 , defined such that features smaller than that contain 50% and 95% of the total variance, respectively. Progressive increase in L 50 from vertical velocity to temperature and moisture structures is systematically reproduced in all simulation configurations. This dependence of L 50 on the considered variable complicates the development of scale-aware parameterizations for models with grid spacing in the “terra incognita”. In simulations using a larger domain with heterogeneous surface properties, the development of internal mesoscale patterns significantly affects variance distributions inside analyzed subdomains. Sizes of boundary layer structures also strongly depend on the LES grid spacing and, in case of heterogeneous surface and topography, on location of the subdomain inside a larger computational domain.

54 ENVIRONMENTAL SCIENCES↗

Representations of Precipitation Diurnal Cycle in the Amazon as Simulated by Observationally Constrained Cloud‐System Resolving and Global Climate Models

Abstract The ability of an observationally‐constrained cloud‐system resolving model (Weather Research and Forecasting; WRF, 4‐km grid spacing) and a global climate model (Energy Exascale Earth System Model; E3SM, 1‐degree grid spacing) to represent the precipitation diurnal cycle over the Amazon basin during the 2014 wet season is assessed. The WRF model coupled with a 3‐D variational data assimilation scheme reproduces the spatial variability of the precipitation diurnal cycle over the basin and the lifecycle of westward propagating MCSs initiated by the coastal sea‐breeze front. In contrast, a single morning peak in rainfall is produced by E3SM for simulations despite the nudging of large‐scale winds toward global reanalysis, indicating precipitation in E3SM is largely controlled by local convection associated with diurnal heating. The role of propagating MCS on the environment are discussed by using a multivariate perturbation analysis. We also find that the advection of moisture perturbations from ocean to inland regions have a higher correlation with the occurrence of MCSs in the Amazon than the intensity of colder air intrusion associated with sea breezes along the coast. Moreover, the presence of large cold pools over the central Amazon basin are responsible for the maintenance of propagating deep convection.

54 ENVIRONMENTAL SCIENCES↗

Assimilating Scanning Radar Data into Cloud-Scale Models

The aim of this project is to improve the initial conditions of large eddy simulations (LES) of deep convective storms by assimilating scanning radar reflectivity and radial velocity data as well as local environmental observations. Accomplishing this goal often results in more accurate numerical forecasts of clouds and precipitation than if the background initial meteorological conditions are solely relied upon for convection initiation and intensification, as is typical of most operational and research models. Conducted in a storm-scale LES framework, these more accurate numerical analyses can serve as tool to better understand and parameterize land-atmosphere coupling, boundary layer turbulence, and cloud processes, each used for model parameterization development of convection. Our work examined the sensitivity of the numerical representation of cloud-scale wind and microphysical structures to: i) the assimilation of radiosonde observations characterizing the near-storm inflow, ii) the assimilation of radar data of varying resolution for model simulations with grid spacings of 1-km and 0.25-km, and iii) to the assimilation of three-dimensional plan-projection-indicator (PPI) and range-height indicator (RHI) radar volumes. Few studies have explored deep convective storm analyses and forecasts produced by assimilation of radar observations to cloud-scale LES. Furthermore, to our knowledge, no storm-scale DA study has explored the value of assimilating high-resolution sector RHI volumes to determine if they can improve the retrieval of the vertical kinematic and microphysical storm structure aloft over the use of traditionally utilized PPI scans.

54 ENVIRONMENTAL SCIENCES↗