Search NASA⌕ Search

Engineering topics

Feenstra, Roeland

Publications and source records attributed to Feenstra, Roeland.

Intra- and inter-grain currents in coated conductors with arbitrary grain boundary properties from magnetic measurements

A generalized methodology is described for determining both the intragranular and through-grain-boundary critical current densities in practical coated conductors from contact-free magnetic hysteresis measurements. The model incorporates the vector nature of current density J within the superconducting grains and current conservation with respect to the grain boundaries. Using physically observed values for the grain aspect ratio as input, the analysis yields the low-field intragranular critical current density J{sub c}{sup G} from a single field-dependent measurement of the global J{sub c} and provides a consistent description that spans the entire range from the weak-link (J{sub c}/J{sub c}{sup G}) to the single-grain (J{sub c}/J{sub c}{sup G} {yields} 1) limit. Results are given for ex situ processed RBCO coatings on RABiTS.

36 MATERIALS SCIENCE↗

Examination of Through-Thickness/Through-Time Phase Evolution during an MOD-Type REBCO Precursor Conversion Using Raman Microsscopy

Through-thickness/through-time composition analyses were made on REBa{sub 2}Cu{sub 3}O{sub 6+x} (REBCO) films prepared from metal-organic deposited (MOD) precursors on a RABiTS (rolling-assisted biaxially textured substrate) template. Y Dy{sub 0.5}Ba{sub 2}Cu{sub 3}O{sub 6 + x} films were fabricated either by a single precursor coating or by two separate, equivalent precursor coatings with an intermediate decomposition. Specimens were quenched at selected times along a heat treatment profile that simulated conditions used by American Superconductor, then examined by Raman microscopy along mechanically milled slopes through the REBCO films. Upon reaching the reaction temperature TR, the precursor initially transforms into a (Y, Dy){sub 2}Cu{sub 2}O{sub 5}, CuO, Cu{sub 2}O, and RE-Ba-F-O phase mix, and this is followed shortly by substrate level REBCO formation that propagates upwards through time. Our results indicate that (1) the single layer (SL) and double layer (DL) films (both {approx} 1.2 {mu}m thick) react to completion at about the same rate and arrive at a similar final composition and (2) some residual Ba-Cu-O phases persist near the top of the fully reacted films. The performance of the SL film was moderately better than that of the DL film, seemingly due to better through-thickness REBCO texture as determined using x-ray diffraction.

36 MATERIALS SCIENCE↗

A Phase Relation Study of Ba-Y-Cu-O Coated-Conductor Films Using the Combinatorial Approach

Phase relationships in bulk and thin film Ba-Y-Cu-O high-Tc superconductor system were determined at processing conditions relevant for industrial production of coated conductors. Our results demonstrated that the absence of BaY2CuO5 (which has a critical effect on flux pinning) at 735 C--a typical temperature employed in production of coated conductors--in thin films processed in situ from the BaF2 precursor is caused by the sluggish reaction kinetics rather than by the presence of fluorine in the system. Thermodynamic calculations combined with annealing experiments confirmed that BaY2CuO5 is thermodynamically stable but forms at temperatures higher than 735 C.

36 MATERIALS SCIENCE↗

A Modular Ex Situ Conversion Process for Thick MOD-Fluoride RBCO Precursors

Following a review of heating induced chemical and structural changes in RBa2Cu3O7 (RBCO) fluoride precursors (R= rare earth of Y) deposited by metalorganic (MOD) and physical vapor deposition (PVD), a modular process comprising successive, functionally distinct, brief annealing steps (modules) is introduced. By decoupling events that otherwise occur simultaneously, the modular process provides a framework for addressing the complex kinetics associated with the temperature ramp of the ex situ conversion anneal. Modules for modifying the F concentration, porosity and microstructure, and RBCO nucleation are described.

36 MATERIALS SCIENCE↗

Modification and Conversion of E-beam Co-evaporated Precursors for Fabricating High Critical Current YBa2Cu3O7-x Films

Ex situ conversion of e-beam co-evaporated precursors was studied in an effort to fabricate high critical current YBCO films using the BaF{sub 2} process. It was shown that an intermediate oxygenation annealing prior to the conversion modifies the precursor crystallinity and promotes c-axis epitaxial growth while randomly-oriented film formation is suppressed. With the modified precursors, a critical current density (J{sub c}, 77 K & 0 T) of 2.1 MA/cm{sup 2} measured by SQUID magnetometry was obtained in 1.8 {micro}m thick YBCO films. This corresponds to an estimated transport critical current I{sub c} of about 500 A/cm-width. The mechanism of the pre-annealing effect was investigated by characterization of the precursors, quenched films, and fully converted films using XRD, SEM, and TEM. Cross-sectional TEM was used to study the early nucleation of YBCO film at the precursor/substrate interface. The significant effect of the precursor modification indicated that, in addition to optimizing conversion processing parameters, modifying the precursor is an effective way to achieve the desired epitaxial film structure and to obtain higher critical currents, I{sub c}.

36 MATERIALS SCIENCE↗

Progress in Nanoengineered Microstructures for Tunable High-Current, High-Temperature Superconducting Wires

High critical current densities (J{sub c}) in thick films of the Y{sub 1}Ba{sub 2}Cu{sub 3}O{sub 7-{delta}} (YBCO, {Tc}{approx}92 K) superconductor directly depend upon the types of nanoscale defects and their densities within the films. A major challenge for developing a viable wire technology is to introduce nanoscale defect structures into the YBCO grains of the thick film suitable for flux pinning and the tailoring of the superconducting properties to specific, application-dependent, temperature and magnetic field conditions. Concurrently, the YBCO film needs to be integrated into a macroscopically defect-free conductor in which the grain-to-grain connectivity maintains levels of inter-grain J{sub c} that are comparable to the intra-grain J{sub c}. That is, high critical current (I{sub c}) YBCO coated conductors must contain engineered in homogeneities on the nanoscale, while being homogeneous on the macroscale. An analysis is presented of the advances in high-performance YBCO coated-conductors using chemical solution deposition (CSD) based on metal trifluoroacetates and the subsequent processing to nano-engineer the microstructure for tunable superconducting wires. Multi-scale structural, chemical, and electrical investigations of the CSD film processes, thick film development, key microstructural features, and wire properties are presented. Prospects for further development of much higher I{sub c} wires for large-scale, commercial application are discussed within the context of these recent advances.

36 MATERIALS SCIENCE↗

A Review of the Influence of Grain Boundary Geometry on the Electromagnetic Properties of Polycrystalline YBa 2 Cu 3 O 7-x Films

Shortly after the discovery of high-temperature superconducting (HTS) materials in the late 1980s, it was revealed that grain boundaries in these complex oxides are strong barriers to current flow. This fact has remained one of the most significant challenges to a viable HTS conductor, and necessitated the development of technologies capable of producing biaxially textured substrates in long lengths. Multiple studies have reported that the critical current density (J{sub c}) across grain boundaries in the perovskite-like superconductor YBa{sub 2}Cu{sub 3}O{sub 7?x} (YBCO) falls off exponentially below the intragrain J{sub c} beyond a critical misorientation angle {theta}{sub c} of only {approx} 2{sup o}-3{sup o}. Here we review our recent work demonstrating that certain grain boundary geometries permit significant enhancements of J{sub c} well beyond the conventional J{sub c}({theta}) limit, and also that the grain boundary structure in YBCO films is tied closely to the films deposition technique. Pulsed laser deposition, a physical vapor deposition technique, results in a columnar grain structure and planar grain boundaries that exhibit the typical J{sub c}({theta}) dependence. Ex situ growth processes, where the YBCO film is converted from a previously deposited precursor, can result in laminar grain growth with highly meandered grain boundaries. These latter grain boundary structures are directly correlated to greatly improved J{sub c} values over a wide range of applied magnetic fields. Consequently, very high J{sub c} values are possible in polycrystalline HTS wire even when significant misorientations between grains are present.

36 MATERIALS SCIENCE↗

Phase Evolution in Ba-(Nd,Eu,Gd)-Cu-O-Coated Conductor Films

Phases that are in equilibrium with BaR{sub 2}CuO{sub 6+}x (R = lanthanides and Y), such as the 'green-phase' and 'brown-phase' structural variants of BaR{sub 2}CuO{sub 5} in bulk samples, are attractive choices for flux-pinning for coated conductor applications because of the guaranteed chemical stability. In films, high-temperature x-ray diffraction studies of Ba{sub 2}RCu{sub 3}O{sub 6+}x superconductor deposited on SrTiO{sub 3} substrate using the trifluoroacetate solution method demonstrate that while BaNd{sub 2}CuO{sub 5} ('brown-phase' structure) develops at 735 C and 100 Pa{sub p{sub O2}}, neither BaGd{sub 2}CuO{sub 5} nor Ba(Nd{sub 1/3}Eu{sub 1/3}Gd{sub 1/3}){sub 2}CuO{sub 5} (both green-phase structure) form at these conditions. As a result, Ba{sub 2}(Nd{sub 1/3}Eu{sub 1/3}Gd{sub 1/3})Cu{sub 3}O{sub 6+}x in thin films is in equilibrium with the brown-phase, and Ba{sub 2}GdCu{sub 3}O{sub 6+}x is in equilibrium with Gd{sub 2}O{sub 3} in the Ba-Gd-Cu-O system, in contrast to the bulk systems. Different phase relationships in the vicinity of the Ba{sub 2}RCu{sub 3}O{sub 6+}x phase imply different phases are available for flux-pinning applications. These differences will need to be considered carefully in designing optimized superconducting coated conductors.

36 MATERIALS SCIENCE↗