Search NASA⌕ Search

Engineering topics

Feldmann, D. M.

Publications and source records attributed to Feldmann, D. M..

Progress in Nanoengineered Microstructures for Tunable High-Current, High-Temperature Superconducting Wires

High critical current densities (J{sub c}) in thick films of the Y{sub 1}Ba{sub 2}Cu{sub 3}O{sub 7-{delta}} (YBCO, {Tc}{approx}92 K) superconductor directly depend upon the types of nanoscale defects and their densities within the films. A major challenge for developing a viable wire technology is to introduce nanoscale defect structures into the YBCO grains of the thick film suitable for flux pinning and the tailoring of the superconducting properties to specific, application-dependent, temperature and magnetic field conditions. Concurrently, the YBCO film needs to be integrated into a macroscopically defect-free conductor in which the grain-to-grain connectivity maintains levels of inter-grain J{sub c} that are comparable to the intra-grain J{sub c}. That is, high critical current (I{sub c}) YBCO coated conductors must contain engineered in homogeneities on the nanoscale, while being homogeneous on the macroscale. An analysis is presented of the advances in high-performance YBCO coated-conductors using chemical solution deposition (CSD) based on metal trifluoroacetates and the subsequent processing to nano-engineer the microstructure for tunable superconducting wires. Multi-scale structural, chemical, and electrical investigations of the CSD film processes, thick film development, key microstructural features, and wire properties are presented. Prospects for further development of much higher I{sub c} wires for large-scale, commercial application are discussed within the context of these recent advances.

36 MATERIALS SCIENCE↗

A Review of the Influence of Grain Boundary Geometry on the Electromagnetic Properties of Polycrystalline YBa 2 Cu 3 O 7-x Films

Shortly after the discovery of high-temperature superconducting (HTS) materials in the late 1980s, it was revealed that grain boundaries in these complex oxides are strong barriers to current flow. This fact has remained one of the most significant challenges to a viable HTS conductor, and necessitated the development of technologies capable of producing biaxially textured substrates in long lengths. Multiple studies have reported that the critical current density (J{sub c}) across grain boundaries in the perovskite-like superconductor YBa{sub 2}Cu{sub 3}O{sub 7?x} (YBCO) falls off exponentially below the intragrain J{sub c} beyond a critical misorientation angle {theta}{sub c} of only {approx} 2{sup o}-3{sup o}. Here we review our recent work demonstrating that certain grain boundary geometries permit significant enhancements of J{sub c} well beyond the conventional J{sub c}({theta}) limit, and also that the grain boundary structure in YBCO films is tied closely to the films deposition technique. Pulsed laser deposition, a physical vapor deposition technique, results in a columnar grain structure and planar grain boundaries that exhibit the typical J{sub c}({theta}) dependence. Ex situ growth processes, where the YBCO film is converted from a previously deposited precursor, can result in laminar grain growth with highly meandered grain boundaries. These latter grain boundary structures are directly correlated to greatly improved J{sub c} values over a wide range of applied magnetic fields. Consequently, very high J{sub c} values are possible in polycrystalline HTS wire even when significant misorientations between grains are present.

36 MATERIALS SCIENCE↗