Effects of operating parameters on single-stage ultrasonic separation of ethanol from its aqueous solutions
Not Available
Engineering topics
Publications and source records attributed to Feng, Hao.
Not Available
Not Available
Not Available
DDG is a major source of protein, calcium, phosphorus, and sulfur is arguably the most important byproduct of the bioethanol industry with increasing demand over the past few years. Reducing energy consumption in the DDG production process and energy recovery from DDG is vital for sustainable bioethanol productions. In this paper, a novel direct-contact multi-frequency, multimode, and modulated (MMM) ultrasonic dryer (US) was developed for the first time and has been applied in dehydration of wet distillers' grain (WDG). Ultrasonic drying (US) was combined with a convective airflow (HA) at different temperatures of 25 (room temperature), 50 and 70 °C to evaluate the impact of US, HA, and US + HA on drying kinetics, activation energy, chemical compositions, microstructure, and color of DDG. Semi-empirical kinetic models were developed and evaluating drying performances showed that the application of ultrasound significantly enhanced the drying rate and decreased the drying time (by 46%), especially at low drying temperatures. The activation energy for moisture removal in the presence of ultrasound was about 50% of that without ultrasound. The final dried distillers' grains product processed by ultrasonic drying had a brighter color, a higher available protein, a higher digestible protein (the lowest acid detergent insoluble crude protein), and a better surface profile with no compromise on minerals and fiber contents.
Portable near-infrared spectrometer in the spectral range of 900–1700 nm was evaluated for the first time to assess and monitor apple hardness in real-time during ultrasonic drying. Calibration models were developed using PLS and ANN, and their performances were evaluated by internal leave-one-out cross-validation and an external dataset. Several pre-treatments including standard normal variate (SNV), multiplicative scatter correction (MSC), Savitzky–Golay first and second derivatives were employed to examine the effects of spectral variations in hardness prediction. Seven important wavelengths were selected using weighted regression coefficients to develop a simple MLR model to facilitate the model interpretation and circumvent noise. The models using PLS, MLR, and ANN with selected wavelengths predicted the apple hardness with R 2 p of 0.91, 0.91, 0.95, and RMSEP of 14.78, 14.85, and 12.46 N, respectively. Finally, the results indicate that portable NIR spectrometers are quite promising for real-time monitoring of apple hardness during ultrasonic drying.
The separation of organic molecules in downstream processes, such as distillation, plays a vital role in biobased chemical production. A comprehensive study was performed here using ultrasonic energy to separate 11 organic molecules from their binary aqueous solutions under nonthermal, nonequilibrium, and phase-change free conditions. A batch sonoseparator with a three-stage mist collection unit allowed direct analysis of ultrasound-generated mist with an HPLC/GC and differentiation and quantification of the vapor and mist. The results showed that the alcohols (1-butanol, ethanol, 1-propanol, and methanol) and acetone were enriched in the ultrasound-generated mist with enrichment ratios of 3.2–5. On the other hand, ethylene glycol, glycerol, γ-valerolactone (GVL), glucose, and sucrose were diluted with dilution ratios in the range of 2.04–15.7 in the mist and vapor generated by ultrasound (or concentrated in the bulk solution). No enrichment nor dilution of acetic acid was observed. The role of various physicochemical parameters such as dynamic viscosity, surface tension, Henry’s law of solubility constant, vapor pressure, and octanol–water partition coefficient in the enrichment was examined. Furthermore, the hydrophobicity of the organic molecules represented by the octanol–water partition coefficient was found to play a crucial role in determining the separation characteristics of the molecules in ultrasound-generated mist and vapor.
Not provided.
Wireless charging systems are foreseen as an effective solution to improve the convenience and safety of conventional conductive chargers. As this technology has matured, recent broad applications of wireless chargers to electrified transportation have indicated a trend toward higher power, power density, modularity, and scalability of designs. In this article, commercial systems and laboratory prototypes are reviewed, focusing mostly on the advances in high-power wireless charging systems. The recent endeavors in magnetic pad designs, compensation networks, power electronics converters, control strategies, and communication protocols are illustrated. Both stationary and dynamic (in-motion) wireless charging systems are discussed, and critical differences in their designs and applications are emphasized. On that basis, the comparisons among different solutions and design considerations are summarized to present the essential elements and technology roadmap that will be necessary to support large-scale deployment of high-power wireless charging systems. The review is concluded with the discussion of several fundamental challenges and prospects of high-power wireless power transfer (WPT) systems. Foreseen challenges include utilization of advanced materials, electric and electromagnetic field measurement and mitigation, customization, communications, power metering, and cybersecurity.
Since the gas–slag–metal three-phase transfer mechanism of nitrogen is not suitable to account for the nitrogen pickup during pressurized electroslag remelting process, the laboratory experiments have been carried out to study the transfer mechanism of nitrogen using different nitrogen partial pressures and electrode immersion depths. Then, two possible transfer mechanisms of nitrogen have been proposed, and a 2D transient numerical model has been developed to investigate the behavior of nitrogen based on the new proposed mechanisms. The simulated results are compared with the experiment to validate the feasibility of new proposed mechanism. The results show that the nitrogen content in ingot increases with the increasing nitrogen partial pressure and decreasing electrode immersion depth. At the current experimental condition, the electrode immersion depth seems to play a more important role in the nitrogen pickup than the nitrogen partial pressure. Due to the limits of thermodynamic and kinetic conditions, the nitrogen pickup is negligible via the transfer from gas to liquid metal through molten slag whether nitrogen chemically or physically dissolves into slag. The mechanism that nitrogen directly reacts with the partially exposed liquid metal film under the electrode tip due to the fluctuation of gas/slag interface could reasonably account for the experimental results. Furthermore, based on the mechanism, the predicted variation tendency of nitrogen content in ingot is in agreement with the experiment.
Several methods of polarized neutron scattering call for a zero magnetic field region to reduce magnetic field integral aberrations while preserving the neutron polarization. Though the design for large angle neutron scattering has been presented in various places, the design characterization and tuning has not been discussed before. In this report, the tuning procedure will be discussed with both neutron polarization transport and utilization of fluxgate magnetometers. As a tuning procedure, polarized neutrons are sensitive to any local field distortions along all trajectories within the beam, but the process is slow. With fluxgates, the entire region cannot be tested, but very fast and precise measurements can be made in accessible regions of interest. Furthermore, we would like to benchmark the usage of fluxgates as a fast tuning probe compared with polarization measurements made with neutrons.
Highlights: • High temperature oxidation behavior and mechanism of S32707 were investigated in air. • MoO{sub 3}, molten molybdate and precipitate jointly cause catastrophic oxidation at 900 °C. • Air-nitriding plays an important role in accelerating oxidation at 1000 and 1100 °C. • Synergism of MoO{sub 3}, molten molybdate and nitriding promotes catastrophic oxidation. • Disappearance of MoO{sub 3}, molybdate and nitriding enhances oxidation resistance at 1200 °C. - Abstract: High-temperature oxidation behavior and the mechanism of hyper duplex stainless steel S32707 were investigated at 900, 1000, 1100 and 1200 °C in air. Some interesting oxidation characteristics were observed, and the corresponding oxidation mechanisms were proposed. At 900 °C, oxidation follows a linear rate law. The combined actions of MoO{sub 3} volatilization, molten molybdate dissolution reaction and block-like σ phase and Cr{sub 2}N precipitation cause catastrophic oxidation. When the temperature is raised to 1000 and 1100 °C, the deleterious effects of MoO{sub 3} and molten molybdates are greatly enhanced. Moreover, undesirable air-nitriding occurs and further accelerates the oxidation. The synergistic effects of MoO{sub 3} volatilization, molten molybdate dissolution reaction and air-nitriding strongly promote catastrophic oxidation. Surprisingly, the oxidation at 1200 °C follows a near-parabolic rate law. The disappearances of MoO{sub 3}, molten molybdates and air-nitriding lead to the formation of a rather compact, complete and protective oxide layer. The oxidation resistance of the steel has been clearly improved.
Using superconducting magnetic Wollaston prisms, high-resolution neutron Larmor diffraction has been implemented at the High-Flux Isotope Reactor of Oak Ridge National Laboratory (ORNL), Tennesse, USA. This technique allows the inverse relationship between the achievable diffraction resolution and the usable neutron flux to be overcome. Instead of employing physically tilted radio-frequency spin flippers, the method uses magnetic Wollaston prisms which are electromagnetically tuned by changing the field configurations in the device. As implemented, this method can be used to measure lattice-spacing changes induced, for example, by thermal expansion or strain with a resolution of Δd/d ≃ 10 –6 , and the splitting of sharp Bragg peaks with a resolution of Δd/d = 3 × 10 –4 . The resolution for discerning a change in the profile of a Bragg peak is Δd/d < 10 –5 . This is a remarkable degree of precision for a neutron diffractometer as compact as the one used in this implementation. Higher precision could be obtained by implementing this technique in an instrument with a larger footprint. In conclusion, the availability of this technique will provide an alternative when standard neutron diffraction methods fail and will greatly benefit the scientific communities that require high-resolution diffraction measurements.