Search NASA⌕ Search

Engineering topics

Feng, Yuan

Publications and source records attributed to Feng, Yuan.

At least 19 records

Evaluation of desiccation cracking characteristics of inorganic micro-fiber-reinforced engineered barrier material (IMEBM) for geological repository

Abstract Buffer material is crucial for the engineering barrier system to dispose of high-level radioactive waste in a geological repository. A reliable buffer material should be able to maintain good sealing characteristics and minimize desiccation cracking. In this study, the effectiveness of inorganic fiber-reinforced engineering barrier material in reducing desiccation cracks in bentonite was evaluated via desiccation tests, image analysis, and air permeability tests. The effects of fiber type (E-glass fiber and basalt fiber) and fiber content (0.0%, 0.5%, 1.0%, 1.5%, 3.0%, and 5.0% of dry weight of the bentonite) on the development of desiccation cracks in the fiber–bentonite mixtures with the same given initial moisture content were evaluated. The results indicated that the addition of fibers could significantly reduce the crack size and area in bentonite during the drying. Basalt fibers showed a slightly better reinforcement effect than E-glass fibers when the fiber content was lower than 3.0%. The addition of fibers prevented the development of penetrating cracks and significantly reduced the permeability of the bentonite after drying. The permeabilities of basalt fiber- and E-glass fiber-reinforced bentonite composites with 3% reinforcement were 5.81 × 10 –11 m 2 and 7.24 × 10 –11 m 2 , respectively, which were 64 and 51 times smaller than that of pure bentonite. X-ray–CT observation of the internal structure of the samples after drying showed that the addition of fibers significantly changed the crack morphology and potentially increased the tortuosity.

Feng, Yuan↗

Application of physics-informed neural networks (PINNs) solution to coupled thermal and hydraulic processes in silty sands

Abstract The accurate modeling of water and heat transport in soils is crucial for both geo-environmental and geothermal engineering. Traditional modeling methods are problematic because they require well-defined boundaries and initial conditions. Recently, physics-informed neural networks (PINNs), which incorporate partial differential equations (PDEs) to solve forward and inverse problems, have attracted increasing attention in machine learning research. In this study, we applied PINNs to tackle hydraulic and thermal transport coupling forward problems in silty sands. A fully connected deep neural network was utilized for training. This neural network model leverages automatic differentiation to apply the governing equations as constraints, based on the mathematical approximations established by the neural network itself. We conducted forward problems and compared the solutions derived from PINNs with those from Finite Element Method (FEM) simulations. The forward problem results demonstrate the PINNs model’s capability in predicting hydraulic transport, heat transport, and thermal–hydraulic coupling in silty sands under various boundary conditions. The PINNs exhibited great performance in simulating the thermal–hydraulic coupling problem. The accuracy of the PINNs solutions shows its potential for simulation in geotechnical engineering.

Feng, Yuan↗

Pd-CeO 2 catalyst facilely derived from one-pot generated Pd@Ce-BTC for low temperature CO oxidation

Due to the capacity to offer abundant catalytic sites within porous solids featuring high surface areas, metal-organic frameworks (MOFs) and their derivatives have garnered considerable attention as prospective catalysts in environmental catalysis. Here, to promote the industrial application of MOFs, there is an urgent need for an effective and environmental-friendly preparation approach. Breaking through the limitation of the traditional two-step preparation method that Pd was introduced to the already prepared Ce-BTC (Pd/Ce-BTC, BTC = 1, 3, 5 benzenetricarboxylate), in this work, we present a novel one-pot solvothermal method for synthesizing the Pd material supported by Ce-BTC (Pd@Ce-BTC). After pyrolysis in N 2 flow or air flow, Pd-CeO 2 catalysts derived from Pd@Ce-BTC exhibited much higher CO oxidation activity than those from Pd/Ce-BTC. Moreover, Pd/Ce-BTC and Pd@Ce-BTC pyrolyzed in N 2 flow (Pd/Ce-BTC-N and Pd@Ce-BTC-N) could better catalyze the oxidation of CO than Pd/Ce-BTC and Pd@Ce-BTC pyrolyzed in air flow (Pd/Ce-BTC-A and Pd@Ce-BTC-A). Further characterizations revealed that the abundant surface Ce 3+ species, rich surface adsorbed oxygen species and superior redox properties were the main reasons for the superior CO oxidation activity of Pd@Ce-BTC-N.

36 MATERIALS SCIENCE↗

Time domain probabilistic seismic risk analysis using ground motion prediction equations of Fourier amplitude spectra

Modeling of Fourier amplitude spectra (FAS) of seismic motions has gained much attention in engineering seismology. In the past few years, several ground motion prediction equations (GMPEs) and inter-frequency correlation structure of FAS have been established. Due to many preferable characteristics of FAS, probabilistic seismic hazard/risk analysis is rapidly changing from ergodic, spectrum acceleration Sa(T 0 )-based approach to non-ergodic, site-specific, FAS-based approach. This paper presents time domain intrusive framework for probabilistic seismic risk analysis using GMPE of FAS. Herein, methodology for time domain stochastic ground motion modeling based on GMPEs of FAS is presented in some detail. The simulated uncertain motions are modeled as a random process and represented by polynomial chaos Karhunen-Loève expansion. The random process excitations are further propagated into the uncertain structural system using Galerkin stochastic finite element method (SFEM). Probabilistic evolution of structural response is solved, and such solution is used to develop seismic risk for any damage state. The presented framework is illustrated through seismic risk analysis of a four-story building subjected to possible earthquakes from two strike slip faults. The influences of the epistemic uncertainties in source stress drop Δσ and site attenuation κ0 on seismic risk are investigated. The need for non-ergodic seismic risk analysis with source-specific and site specific characterizations is emphasized.

58 GEOSCIENCES↗

Matrix-Model Simulations Using Quantum Computing, Deep Learning, and Lattice Monte Carlo

Matrix quantum mechanics plays various important roles in theoretical physics, such as a holographic description of quantum black holes, and it underpins the only practical numerical approach to the study of complex high-dimensional supergravity theories. Understanding quantum black holes and the role of entanglement in a holographic setup is of paramount importance for the realization of a quantum theory of gravity. Moreover, a complete numerical understanding of the holographic duality and the emergence of geometric space-time features from microscopic degrees of freedom could pave the way for new discoveries in quantum information science. Euclidean lattice Monte Carlo simulations are the de facto numerical tool for understanding the spectrum of large matrix models and have been used to test the holographic duality. However, they are not tailored to extract dynamical properties or even the quantum wave function of the ground state of matrix models. Quantum computing and deep learning provide potentially useful approaches to study the dynamics of matrix quantum mechanics. If successful in the context of matrix models, these rapidly improving numerical techniques could become the new Swiss army knife of quantum gravity practitioners. In this paper, we perform the first systematic survey for quantum computing and deep-learning approaches to matrix quantum mechanics, comparing them to lattice Monte Carlo simulations. These provide baseline benchmarks before addressing more complicated problems. In particular, we test the performance of each method by calculating the low-energy spectrum.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A modular methodology for time-domain stochastic seismic wave propagation

Presented here is a modular methodology for time-domain stochastic seismic wave propagation analysis. Presented methodology is designed to analyse uncertain seismic motions as an input, propagating through uncertain material. Traditional approach for uncertain wave propagation relies on models that include deep bedrock, local soil site, and their random process and random field information. Such models can become quite large and computationally intractable. The modular approach proposed herein features two step approach that allows separate consideration of the deep bedrock and local site along with corresponding random field information. In this work, the first step considers an auxiliary stochastic motions problem in the bedrock. Stochastic local site response can then be simulated in a reduced domain within certain depth from the surface. Application of uncertain seismic motions at depth, for local uncertain site response is done using stochastic effective forces developed through the Domain Reduction Method. By using Hermite polynomial chaos expansion to represent the non-Gaussian random field of material parameters and non-stationary random process of seismic motion, the proposed modular methodology is formulated using intrusive stochastic Galerkin approach, as seen in the Stochastic Elastic–Plastic Finite Element Method (SEPFEM). Developed modular methodology is illustrated using a 1-D stochastic seismic wave propagation analysis with three cases, and simulation results are also verified with results from conventional approach.

58 GEOSCIENCES↗

On the competitive antagonism effect in combined chloride-sulfate attack: A numerical exploration

Highlights: • A chemo-physical-mechanical method based on thermodynamic modelling is implemented. • The contradicting findings from reported experiments are numerically explored. • The competitive antagonism effect is time-dependent rather than a conclusive term. • The competitive antagonism effect is quantifiable with a novel assessment criterion. It is of tremendous difficulty to draw a conclusive verdict on the complex process of mutual interference regarding the combined chloride-sulfate attack on concrete, where many have explored the topic, but contradicting results have been reported. In this paper, by taking advantages of the chemo-physical-mechanical method, based on the robust technique of thermodynamic modelling, the competitive antagonism effect in combined chloride-sulfate attack is investigated. Firstly, a range of reported tests are numerically modelled to demonstrate the effectiveness of the employed method in interpreting those opposing and diverse experimental outcomes. More importantly, a fresh conjecture incorporating a novel assessment criterion for the competitive antagonism effect is proposed and supported through a carefully designed illustrative example. Based on the numerical exploration, unique findings and implications for future engineering practices are revealed.

36 MATERIALS SCIENCE↗

Modeling and simulation of earthquake soil structure interaction excited by inclined seismic waves

Presented is an application of wave potential formulation (WPF) together with domain reduction method (DRM) to modeling earthquake soil structure interaction (ESSI) behavior in horizontally layered ground under inclined incident seismic waves. Wave potential formulation is used to develop a spatially varying, inclined seismic wave field from incident Primary (P) and Secondary (S) waves that propagate through layered ground. Developed seismic wave field is then used to develop effective forces for Domain Reduction Method that are then used for analyzing ESSI response of a soil structure system. Developed methodology, called WPF-DRM, is verified using analytic solution for a free field response of layered ground subjected to inclined incident waves. Developed WPF-DRM methodology is illustrated through analysis of an ESSI response of a deeply embedded structure, a small modular reactor (SMR) subjected to incident S wave polarized in vertical plane (SV) with variation in inclinations and frequencies. Presented example highlights the influences of incident wave inclination and frequency on ESSI response of analyzed SMR.

58 GEOSCIENCES↗

Energy dissipation analysis of elastic–plastic materials

In this article, we present an energy dissipation analysis framework for granular material that is based on thermodynamics. Theoretical formulations are derived from the second law of thermodynamics, in conjunction with a few plausible assumptions on energy transformation and dissipation. The role of plastic free energy is emphasized by a conceptual experiment showing its physical nature. Theoretical formulation is adapted in order to be applied in elastic–plastic finite element method (FEM) simulations. Developed methodology is verified through comparison of input work, stored energy, and energy dissipation of the system. Lastly, separation of plastic work into plastic free energy and energy dissipation removes a common mistake, made in a number of publications, where energy dissipation can attain negative values (energy production) which is impossible.

36 MATERIALS SCIENCE↗

First-principles study of electronic structures and photocatalytic activity of low-Miller-index surfaces of ZnO

First-principles calculations have been performed to investigate the electronic structures and optical properties of the main low-Miller-index surfaces of ZnO: nonpolar (1010) and (1120) surfaces as well as polar (0001)-Zn and (0001)-O surfaces. According to the structure optimization results, there are similar relaxation behaviors for the (1010) and (1120) surfaces, both with a strong tilting of the surface Zn-O dimers and an obvious contraction of the surface bonds. For the polar surfaces, the surface double layers both tend to relax inwards, but the largest relaxation is found on the (0001)-O surfaces. The calculated band gaps are 0.56, 0.89, 0.21, and 0.71 eV for (1010), (1120), (0001)-Zn and (0001)-O surfaces, respectively. For the nonpolar (1010) and 1120 surfaces, the Fermi levels locate at the valence band maximum, which are similar to that of bulk ZnO. The surface states in the conduction band lead to the increased Fermi level and cause the n-type conduction behavior for (0001)-Zn surface. For the (0001)-O surface, the Fermi level shifts down a little into the valence band, leading to the p-type conduction behavior. From the optical properties calculations, absorption regions of all the four surfaces are quite wide and the main absorption peaks locate in the UV region. For the (0001)-Zn surface, it has the strongest absorptions in the near UV-light range and a remarkable red-shift phenomenon of the absorption edge. This indicates that (0001)-Zn surface has the highest photocatalytic activity among the four surfaces as the low excitation energy is required theoretically. The computed results are in accordance with the experimental observations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NUMERICAL SIMULATION OF HOT ACCRETION FLOWS. I. A LARGE RADIAL DYNAMICAL RANGE AND THE DENSITY PROFILE OF ACCRETION FLOW

Numerical simulations of hot accretion flow, both hydrodynamical and magnetohydrodynamical, have shown that the mass accretion rate decreases with decreasing radius; consequently, the density profile of accretion flow becomes flatter than in the case of a constant accretion rate. This result has important theoretical and observational implications. However, because of technical difficulties, the radial dynamic range in almost all previous simulations usually spans at most two orders of magnitude. This small dynamical range, combined with the effects of boundary conditions, makes the simulation results suspect. In particular, the radial profiles of density and inflow rate may not be precise enough to be used to compare with observations. In this paper, we present a ''two-zone'' approach to expand the radial dynamical range from two to four orders of magnitude. We confirm previous results and find that from r{sub s} to 10{sup 4} r{sub s} the radial profiles of accretion rate and density can be well described by M-dot (r){proportional_to}r{sup s} and {rho}{proportional_to}r {sup -p}. The values of (s, p) are (0.48, 0.65) and (0.4, 0.85) for the viscous parameters {alpha} = 0.001 and {alpha} = 0.01, respectively. More precisely, the accretion rate is constant (i.e., s = 0) within {approx}10r{sub s}, but beyond 10r{sub s} we have s = 0.65 and 0.54 for {alpha} = 0.001 and 0.01, respectively. We find that the values of both s and p are similar in all numerical simulation works irrespective of whether a magnetic field is included or not and what kind of initial conditions are adopted. Such an apparently surprising ''common'' result can be explained by the most recent version of the adiabatic inflow-outflow model. The density profile we obtain is in good quantitative agreement with that obtained from the detailed observations and modeling of Sgr A* and NGC 3115. The origin and implications of such a profile will be investigated in a subsequent paper.

79 ASTRONOMY AND ASTROPHYSICS↗

NUMERICAL SIMULATION OF HOT ACCRETION FLOWS. II. NATURE, ORIGIN, AND PROPERTIES OF OUTFLOWS AND THEIR POSSIBLE OBSERVATIONAL APPLICATIONS

Hydrodynamical (HD) and magnetohydrodynamical (MHD) numerical simulations of hot accretion flows have indicated that the inflow accretion rate decreases inward. Two models have been proposed to explain this result. In the adiabatic inflow-outflow solution (ADIOS), this is because of the loss of gas in the outflow. In the alternative convection-dominated accretion flow model, it is thought that the flow is convectively unstable and gas is locked in convective eddies. We investigate the nature of the inward decrease of the accretion rate using HD and MHD simulations. We calculate various properties of the inflow and outflow such as temperature and rotational velocity. Systematic and significant differences are found. These results suggest that the inflow and outflow are not simply convective turbulence; instead, systematic inward and outward motion (i.e., real outflow) must exist. We have also analyzed the convective stability of MHD accretion flows and found that they are stable. These results favor the ADIOS scenario. We suggest that the mechanisms of producing outflow in HD and MHD flows are the buoyancy associated with the convection and the centrifugal force associated with the angular momentum transport mediated by the magnetic field, respectively. The latter is similar to the Blandford and Payne mechanism but no large-scale open magnetic field is required. We discuss some possible observational applications, including the Fermi bubble in the Galactic center and winds in active galactic nuclei and black hole X-ray binaries.

79 ASTRONOMY AND ASTROPHYSICS↗

EPISODIC JETS AS THE CENTRAL ENGINE OF GAMMA-RAY BURSTS

Most gamma-ray bursts (GRBs) have erratic light curves, which demand that the GRB central engine launches an episodic outflow. Recent Fermi observations of some GRBs indicate a lack of the thermal photosphere component as predicted by the baryonic fireball model, which suggests a magnetic origin of GRBs. Given that powerful episodic jets have been observed along with continuous jets in other astrophysical black hole systems, here we propose an intrinsically episodic, magnetically dominated jet model for the GRB central engine. Accumulation and eruption of free magnetic energy in the corona of a differentially rotating, turbulent accretion flow around a hyperaccreting black hole lead to ejections of episodic, magnetically dominated plasma blobs. These blobs are accelerated magnetically, collide with each other at large radii, trigger rapid magnetic reconnection and turbulence, efficient particle acceleration, and radiation, and power the observed episodic prompt gamma-ray emission from GRBs.

79 ASTRONOMY AND ASTROPHYSICS↗

QCD Resummation for Single Spin Asymmetries

We study the transverse momentum dependent factorization for single spin asymmetries in Drell-Yan and semi-inclusive deep inelastic scattering processes at one-loop order. The next-to-leading order hard factors are calculated in the Ji-Ma-Yuan factorization scheme. We further derive the QCD resummation formalisms for these observables following the Collins-Soper-Sterman method. The results are expressed in terms of the collinear correlation functions from initial and/or final state hadrons coupled with the Sudakov form factor containing all order soft-gluon resummation effects. The scheme-independent coefficients are calculated up to one-loop order.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

OBSERVATIONAL EVIDENCE FOR ACTIVE GALACTIC NUCLEI FEEDBACK AT THE PARSEC SCALE

In a hot accretion flow, the radiation from the innermost region of the flow propagates outward and heats the electrons at large radii via Compton scattering. It has been shown in previous works that if the radiation is strong enough, L {approx}> 2%L{sub Edd}, the electrons at the Bondi radius (r{sub B} {approx} 10{sup 5} r{sub s} ) will be heated to above the virial temperature; thus, the accretion will be stopped. The accretion will recover after the gas cools down. This results in the oscillation of the black hole activity. In this paper, we show that this mechanism is the origin of the intermittent activity of some compact young radio sources. Such intermittency is required to explain the population of these sources. We calculate the timescales of the black hole oscillation and find that the durations of active and inactive phases are 3 x 10{sup 4}(0.1/{alpha})(M/10{sup 8} M{sub sun})(L/2%L{sub Edd}){sup -1/2} yr and 10{sup 5}({alpha}/0.1)(M/10{sup 8} M{sub sun}) yr, respectively, consistent with those required to explain observations. Such feedback occurring at the parsec scale should be common in low-luminosity active galactic nuclei and should be considered when we consider their matter and energy output.

79 ASTRONOMY AND ASTROPHYSICS↗