Search NASA⌕ Search

Engineering topics

Feng, Zongqiang

Publications and source records attributed to Feng, Zongqiang.

3 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Structural and mechanical properties of magnesium aluminate nanoceramics under high pressure

Nanoceramics may have different structural and physical properties compared to their coarse-grained counterparts. Here, we report the high-pressure study of micro- and nano-crystalline MgAl2O4 in order to examine the effect of particle size on the structural stability. A reversible pressure-induced phase transition (cubic to tetragonal) is observed in MgAl2O4 nanocrystals under non-hydrostatic pressure at room temperature, in contrast to the previously reported structural transition of MgAl2O4 at high pressure and high temperature. It is also found that the compressed MgAl2O4 microcrystals do not fracture further below 60 nm, suggesting a plastic deformation mechanism transition. MgAl2O4 with a grain size above ∼60 nm exhibits normal cracking behaviors, but shows metal-like plastic deformation behaviors below this critical size. It is implied that combined ductility and strength can be achieved in nanoceramic MgAl2O4.

Xu, Jianing (ORCID:0000000325474344)↗
DOE OSTI2020

High-pressure strengthening in ultrafine-grained metals

The Hall–Petch relationship, according to which the strength of a metal increases as the grain size decreases, has been reported to break down at a critical grain size of around 10 to 15 nanometres. As the grain size decreases beyond this point, the dominant mechanism of deformation switches from a dislocation-mediated process to grain boundary sliding, leading to material softening. In one previous approach, stabilization of grain boundaries through relaxation and molybdenum segregation was used to prevent this softening effect in nickel–molybdenum alloys with grain sizes below 10 nanometres. Here we track in situ the yield stress and deformation texturing of pure nickel samples of various average grain sizes using a diamond anvil cell coupled with radial X-ray diffraction. Our high-pressure experiments reveal continuous strengthening in samples with grain sizes from 200 nanometres down to 3 nanometres, with the strengthening enhanced (rather than reduced) at grain sizes smaller than 20 nanometres. Here, we achieve a yield strength of approximately 4.2 gigapascals in our 3-nanometre-grain-size samples, ten times stronger than that of a commercial nickel material. A maximum flow stress of 10.2 gigapascals is obtained in nickel of grain size 3 nanometres for the pressure range studied here. We see similar patterns of compression strengthening in gold and palladium samples down to the smallest grain sizes. Simulations and transmission electron microscopy reveal that the high strength observed in nickel of grain size 3 nanometres is caused by the superposition of strengthening mechanisms: both partial and full dislocation hardening plus suppression of grain boundary plasticity. These insights contribute the ongoing search for ultrastrong metals via materials engineering.

36 MATERIALS SCIENCE↗