Search NASA⌕ Search

Engineering topics

Ficker, O. (ORCID:0000000164189517)

Publications and source records attributed to Ficker, O. (ORCID:0000000164189517).

An upper pressure limit for low- Z benign termination of runaway electron beams in TCV

Abstract We present a model for the particle balance in the post-disruption runaway electron plateau phase of a tokamak discharge. The model is constructed with the help of, and applied to, experimental data from TCV discharges investigating the so-called ‘low- Z benign termination’ runaway electron mitigation scheme. In the benign termination scheme, the free electron density is first reduced in order for a subsequently induced MHD instability to grow rapidly and spread the runaway electrons widely across the wall. We show that the observed non-monotonic dependence of the free electron density with the measured neutral pressure is due to plasma re-ionization induced by runaway electron impact ionization. At higher neutral pressures, more target particles are present in the plasma for runaway electrons to collide with and ionize. Parameter scans are conducted to clarify the role of the runaway electron density and energy on the free electron density, and it is found that only the runaway electron density has a noticeable impact. While the free electron density is shown to be related to the spread of heat fluxes at termination, the exact cause for the upper neutral pressure limit remains undetermined and an object for further study.

Hoppe, M. (ORCID:0000000339948977)↗

Benign termination of runaway electron beams on ASDEX Upgrade and TCV

Abstract This paper discusses the development of a benign termination scenario for runaway electron (RE) beams on ASDEX Upgrade and TCV. A systematic study revealed that a low electron density (n e ) companion plasma was required to achieve a large MHD instability, which expelled the confined REs over a large wetted area and allowed for the conversion of magnetic energy to radiation. Control of the companion plasma n e was achieved via neutral pressure regulation and was agnostic to material injection method. The neutral pressure required for recombination was found to be dependent on impurity species, quantity and RE current. On TCV,n e increased at neutral pressures above 1 Pa, indicating that higher collisionality between the REs and neutrals may lead to an upper pressure limit. The conversion of magnetic energy to radiated energy was measured on both machines and a decrease in efficiency was observed at high neutral pressure on TCV. The benign termination technique was able to prevent any significant increase in maximum heat flux on AUG from 200 to 600 kA of RE current, highlighting the ability of this approach to handle fully formed RE beams.

Physics↗

Overview of the COMPASS results *

COMPASS addressed several physical processes that may explain the behaviour of important phenomena. This paper presents results related to the main fields of COMPASS research obtained in the recent two years, including studies of turbulence, L–H transition, plasma material interaction, runaway electron, and disruption physics: Tomographic reconstruction of the edge/SOL turbulence observed by a fast visible camera allowed to visualize turbulent structures without perturbing the plasma. Dependence of the power threshold on the X-point height was studied and related role of radial electric field in the edge/SOL plasma was identified. The effect of high-field-side error fields on the L–H transition was investigated in order to assess the influence of the central solenoid misalignment and the possibility to compensate these error fields by low-field-side coils. Results of fast measurements of electron temperature during ELMs show the ELM peak values at the divertor are around 80% of the initial temperature at the pedestal. Liquid metals were used for the first time as plasma facing material in ELMy H-mode in the tokamak divertor. Good power handling capability was observed for heat fluxes up to 12 MW m –2 and no direct droplet ejection was observed. Partial detachment regime was achieved by impurity seeding in the divertor. The evolution of the heat flux footprint at the outer target was studied. Runaway electrons were studied using new unique systems—impact calorimetry, carbon pellet injection technique, wide variety of magnetic perturbations. Radial feedback control was imposed on the beam. Forces during plasma disruptions were monitored by a number of new diagnostics for vacuum vessel (VV) motion in order to contribute to the scaling laws of sideways disruption forces for ITER. Current flows towards the divertor tiles, incl. possible short-circuiting through PFCs, were investigated during the VDE experiments. The results support ATEC model and improve understanding of disruption loads.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗