Engineering topics

Finn, Cory K.

Publications and source records attributed to Finn, Cory K..

4 records

NASA NTRS2000

Regenerable Air Purification System for Gas-Phase Contaminant Control

A regenerable air purification system (RAPS) that uses water vapor to displace adsorbed contaminants from an. adsorbent column into a closed oxidation loop is under development through cooperative R&D between Vanderbilt University and NASA Ames Research Center. A unit based on this design can be used for removing trace gas-phase contaminants from spacecraft cabin air or from polluted process streams including incinerator exhaust. Recent work has focused on fabrication and operation of a RAPS breadboard at NASA Ames, and on measurement of adsorption isotherm data for several important organic compounds at Vanderbilt. These activities support the use and validation of RAPS modeling software also under development at Vanderbilt, which will in turn be used to construct a prototype system later in the project.

Constantinescu, Ileana C.↗

NASA NTRS1994

A Lab-Scale CELSS

It has been shown that prohibitive resupply costs for extended-duration manned space flight missions will demand that a high degree of recycling and in situ food production be implemented. A prime candidate for in situ food production is the growth of higher level plants. Research in the area of plant physiology is currently underway at many institutions. This research is aimed at the characterization and optimization of gas exchange, transpiration and food production of higher plants in order to support human life in space. However, there are a number of unresolved issues involved in making plant chambers an integral part of a closed life support system. For example, issues pertaining to the integration of tightly coupled, non-linear systems with small buffer volumes will need to be better understood in order to ensure successful long term operation of a Controlled Ecological Life Support System (CELSS). The Advanced Life Support Division at NASA Ames Research Center has embarked on a program to explore some of these issues and demonstrate the feasibility of the CELSS concept. The primary goal of the Laboratory Scale CELSS Project is to develop a fully-functioning integrated CELSS on a laboratory scale in order to provide insight, knowledge and experience applicable to the design of human-rated CELSS facilities. Phase I of this program involves the integration of a plant chamber with a solid waste processor. This paper will describe the requirements, design and some experimental results from Phase I of the Laboratory Scale CELSS Program.

Flynn, Mark E.↗

NASA NTRS1993

A survey of life support system automation and control

The level of automation and control necessary to support advanced life support systems for use in the manned space program is steadily increasing. As the length and complexity of manned missions increase, life support systems must be able to meet new space challenges. Longer, more complex missions create new demands for increased automation, improved sensors, and improved control systems. It is imperative that research in these key areas keep pace with current and future developments in regenerative life support technology. This paper provides an overview of past and present research in the areas of sensor development, automation, and control of life support systems for the manned space program, and it discusses the impact continued research in several key areas will have on the feasibility, operation, and design of future life support systems.

Finn, Cory K.↗

NASA NTRS1991

Analysis of an initial lunar outpost life support system preliminary design

A preliminary design of a life-support system (LSS) was developed as part of an ongoing comprehensive trade study of advanced processor technologies and system architectures for an initial lunar outpost. The design is based on a mission scenario requiring intermittent occupation of a lunar-surface habitat by a crew of four. It incorporates physiochemical process technologies that were considered for Space Station Freedom. A system-level simulation model of the design was developed to obtain steady-state material balances for each LSS processor. The mass-flow rate predictions were used to obtain estimates of the LSS mass, volume, and power consumption by means of processor-sizing correlations that were extrapolated from Space Station Freedom processor designs. The results were used to analyze the impacts of varying crew size, mission duration, processor-operation strategy, and crew-cabin loads on the LSS mass, average power consumption, volume, periodic resupply mass, and waste-accumulation rates. The merits of the design were quantified relative to an open-loop LSS, and the implications of this assessment for future LSS research and technology development were identified.

Ballin, Mark G.↗