Engineering topics

Firestone, James K.

Publications and source records attributed to Firestone, James K..

10 records

NASA NTRS1996

SeaWiFS Technical Report Series: SeaWiFS Calibration and Validation Quality Control Procedures - Volume 38

This document provides five brief reports that address several quality control procedures under the auspices of the Calibration and Validation Element (CVE) within the Sea-viewing Wide Field-of-view Sensor (SeaWiFS) Project. Chapter 1 describes analyses of the 32 sensor engineering telemetry streams. Anomalies in any of the values may impact sensor performance in direct or indirect ways. The analyses are primarily examinations of parameter time series combined with statistical methods such as auto- and cross-correlation functions. Chapter 2 describes how the various onboard (solar and lunar) and vicarious (in situ) calibration data will be analyzed to quantify sensor degradation, if present. The analyses also include methods for detecting the influence of charged particles on sensor performance such as might be expected in the South Atlantic Anomaly (SAA). Chapter 3 discusses the quality control of the ancillary environmental data that are routinely received from other agencies or projects which are used in the atmospheric correction algorithm (total ozone, surface wind velocity, and surface pressure; surface relative humidity is also obtained, but is not used in the initial operational algorithm). Chapter 4 explains the procedures for screening level-, level-2, and level-3 products. These quality control operations incorporate both automated and interactive procedures which check for file format errors (all levels), navigation offsets (level-1), mask and flag performance (level-2), and product anomalies (all levels). Finally, Chapter 5 discusses the match-up data set development for comparing SeaWiFS level-2 derived products with in situ observations, as well as the subsequent outlier analyses that will be used for evaluating error sources.

Hooker, Stanford B.↗

NASA NTRS1994

SeaWiFS technical report series. Volume 19: Case studies for SeaWiFS calibration and validation, part 2

This document provides brief reports, or case studies, on a number of investigations and data set development activities sponsored by the Calibration and Validation Team (CVT) within the Sea-viewing Wide Field-of-view Sensor (SeaWiFS) Project. Chapter 1 is a comparison with the atmospheric correction of Coastal Zone Color Scanner (CZCS) data using two independent radiative transfer formulations. Chapter 2 is a study on lunar reflectance at the SeaWiFS wavelengths which was useful in establishing the SeaWiFS lunar gain. Chapter 3 reports the results of the first ground-based solar calibration of the SeaWiFS instrument. The experiment was repeated in the fall of 1993 after the instrument was modified to reduce stray light; the results from the second experiment will be provided in the next case studies volume. Chapter 4 is a laboratory experiment using trap detectors which may be useful tools in the calibration round-robin program. Chapter 5 is the original data format evaluation study conducted in 1992 which outlines the technical criteria used in considering three candidate formats, the hierarchical data format (HDF), the common data format (CDF), and the network CDF (netCDF). Chapter 6 summarizes the meteorological data sets accumulated during the first three years of CZCS operation which are being used for initial testing of the operational SeaWiFS algorithms and systems and would be used during a second global processing of the CZCS data set. Chapter 7 describes how near-real time surface meteorological and total ozone data required for the atmospheric correction algorithm will be retrieved and processed. Finally, Chapter 8 is a comparison of surface wind products from various operational meteorological centers and field observations. Surface winds are used in the atmospheric correction scheme to estimate glint and foam radiances.

Hooker, Stanford B.↗

NASA NTRS1994

SeaWiFS technical report series. Volume 20: The SeaWiFS bio-optical archive and storage system (SeaBASS), part 1

This document provides an overview of the Sea-viewing Wide Field-of-view Sensor (SeaWiFS) Bio-Optical Archive and Storage System (SeaBASS), which will serve as a repository for numerous data sets of interest to the SeaWiFS Science Team and other approved investigators in the oceanographic community. The data collected will be those data sets suitable for the development and evaluation of bio-optical algorithms which include results from SeaWiFS Intercalibration Round-Robin Experiments (SIRREXs), prelaunch characterization of the SeaWiFS instrument by its manufacturer -- Hughes/Santa Barbara Research Center (SBRC), Marine Optical Characterization Experiment (MOCE) cruises, Marine Optical Buoy (MOBY) deployments and refurbishments, and field studies of other scientists outside of NASA. The primary goal of the data system is to provide a simple mechanism for querying the available archive and requesting specific items, while assuring that the data is made available only to authorized users. The design, construction, and maintenance of SeaBASS is the responsibility of the SeaWiFS Calibration and Validation Team (CVT). This report is concerned with documenting the execution of this task by the CVT and consists of a series of chapters detailing the various data sets involved. The topics presented are as follows: 1) overview of the SeaBASS file architecture, 2) the bio-optical data system, 3) the historical pigment database, 4) the SIRREX database, and 5) the SBRC database.

Hooker, Stanford B.↗

NASA NTRS1994

SeaWiFS technical report series. Volume 13: Case studies for SeaWiFS calibration and validation, part 1

Although the Sea-viewing Wide Field-of-view Sensor (SeaWiFS) Calibration and Validation Program relies on the scientific community for the collection of bio-optical and atmospheric correction data as well as for algorithm development, it does have the responsibility for evaluating and comparing the algorithms and for ensuring that the algorithms are properly implemented within the SeaWiFS Data Processing System. This report consists of a series of sensitivity and algorithm (bio-optical, atmospheric correction, and quality control) studies based on Coastal Zone Color Scanner (CZCS) and historical ancillary data undertaken to assist in the development of SeaWiFS specific applications needed for the proper execution of that responsibility. The topics presented are as follows: (1) CZCS bio-optical algorithm comparison, (2) SeaWiFS ozone data analysis study, (3) SeaWiFS pressure and oxygen absorption study, (4) pixel-by-pixel pressure and ozone correction study for ocean color imagery, (5) CZCS overlapping scenes study, (6) a comparison of CZCS and in situ pigment concentrations in the Southern Ocean, (7) the generation of ancillary data climatologies, (8) CZCS sensor ringing mask comparison, and (9) sun glint flag sensitivity study.

Hooker, Stanford B.↗

NASA NTRS1992

PC-SEAPAK user's guide, version 4.0

PC-SEAPAK is designed to provide a complete and affordable capability for processing and analysis of NOAA Advanced Very High Resolution Radiometer (AVHRR) and Nimbus-7 Coastal Zone Color Scanner (CZCS) data. Since the release of version 3.0 over a year ago, significant revisions were made to the AVHRR and CZCS programs and to the statistical data analysis module, and a number of new programs were added. This new version has 114 procedures listed in its menus. The package continues to emphasize user-friendliness and interactive data analysis. Additionally, because the scientific goals of the ocean color research being conducted have shifted to larger space and time scales, batch processing capabilities were enhanced, allowing large quantities of data to be easily ingested and analyzed. The development of PC-SEAPAK was paralled by two other activities that were influential and assistive: the global CZCS processing effort at GSFC and the continued development of VAX-SEAPAK. SEAPAK incorporates the instrument calibration and support all levels of data available from the CZCS archive.

Mcclain, Charles R.↗

NASA NTRS1991

SEAPAK user's guide, version 2.0. Volume 1: System description

The SEAPAK is a user interactive satellite data analysis package that was developed for the processing and interpretation of Nimbus-7/Coastal Zone Color Scanner (CZCS) and the NOAA Advanced Very High Resolution Radiometer (AVHRR) data. Significant revisions were made to version 1.0 of the guide, and the ancillary environmental data analysis module was expanded. The package continues to emphasize user friendliness and user interactive data analyses. Additionally, because the scientific goals of the ocean color research being conducted have shifted to large space and time scales, batch processing capabilities for both satellite and ancillary environmental data analyses were enhanced, thus allowing large quantities of data to be ingested and analyzed in background.

Mcclain, Charles R.↗

NASA NTRS1991

SEAPAK user's guide, version 2.0. Volume 2: Descriptions of programs

The SEAPAK is a user-interactive satellite data analysis package that was developed for the processing and interpretation of Nimbus-7/Coastal Zone Color Scanner (CZCS) and the NOAA Advanced Very High Resolution Radiometer (AVHRR) data. Significant revisions were made since version 1.0, and the ancillary environmental data analysis module was greatly expanded. The package continues to be user friendly and user interactive. Also, because the scientific goals of the ocean color research being conducted have shifted to large space and time scales, batch processing capabilities for both satellite and ancillary environmental data analyses were enhanced, thus allowing for large quantities of data to be ingested and analyzed.

Mcclain, Charles R.↗

NASA NTRS1991

Oceanographic data analysis with NASA's SEAPAK software

The paper presents a case study of the interannual variability of vertical Ekman transport (upwelling) observed in the North Atlantic during the CZCS data collection period in order to illustrate SEAPAK's ancillary data handling functions. The study begins at the entire basin-scale for the North Atlantic and proceeds to a regional scale where much of the observed upwelling variability occurs. The analysis utilizes a variety of output types, including images, horizontal contour plots, time series, cross sections, and vertical profiles, produced on the VAX directly or by commercially available PC software packages. The SEAPAK software can be used just as effectively for global or basin-scale studies as for regional studies.

Firestone, James K.↗

NASA NTRS1986

The structure of the atmospheric boundary layer in the central equatorial Pacific during January and February of FGGE

The structure of the atmospheric boundary layer for a region between Hawaii and the equator is studied using dropwindsonde data (about 900 soundings) collected in January and February 1979 as part of the First GARP Global Experiment. These data were used to establish the longitudinal and latitudinal variations in the thermodynamic and wind structure of the boundary layer and describe differences in the structure for convectively active and inactive conditions. Low-level inversions (at a pressure of approximately 850 mb) were found to be an important feature of the structure of the boundary layer for undisturbed conditions. Although the frequency of low-level inversions decreased equatorward from Hawaii, the average height of the inversions observed in these regions did not vary significantly in the north-south direction. For convectively undisturbed conditions, low-level inversions are on the average of sufficient strength to suppress deep convection. However, it is shown they could easily be modified by upward vertical motion to give a boundary layer structure similar to that observed in areas where deep convection was observed.

Firestone, James K.↗

NASA NTRS1986

Dropwindsonde observations of the mean boundary layer structure in the low-latitude Pacific during SOP-1

The low-level mean thermodynamic and wind profiles in the transition between the trade winds and the ICZ are described using the FGGE level II-b dropwindsonde data set collected during the period of SOP-1 (January 15-February 20, 1979). The results illustrate the influence of decaying midlatitude frontal systems in the northwesternmost region, the general tradelike nature of the eastern regions, and the highly convective nature of a region near the equator. Contrary to the results obtained with the traditional approach to the tropical boundary layer, the FGGE data indicate a trade inversion that remains quasi-horizontal in the north-south direction despite an equatorward decrease in its frequency of occurrence, indicating that subsidence may be more important in equatorial regions than was previously thought.

Firestone, James K.↗