Search NASA⌕ Search

Engineering topics

Firestone, Millicent Anne

Publications and source records attributed to Firestone, Millicent Anne.

10 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Multi-stimuli responsive tetra-PPO 60 -PEO 20 ethylene diamine block copolymer enables pH, temperature, and solvent regulation of Au nanoparticle composite plasmonic response

In this work a gold nanoparticle (NP) hydrogel composite prepared by multi-step cascade synthesis undergoes temperature, pH, and solvent dependent nanoscale structural transformations promoting modulation of the plasmon resonance. The composite is spontaneously prepared from a non-covalent lamellar structured lyotropic mesophase (complex fluid) composed of amphiphiles (DMPC and Triton X-100) that support the reactive constituents, a mixture of hydroxyl and acrylate end-derivatized Tetronic (Poloxamine) polymer and [AuCl4] – . The reaction sequence begins with the reduction of [AuCl4] – by the ethylene diamine linkage and PEO blocks of the Tetronic, yielding Au NPs. The redox reaction generates free radicals initiating crosslinking of the acrylate end-derivatized polymer producing a chemical hydrogel. Optical spectroscopy and electron microscopy confirm Au NP formation. ATR/FT-IR spectroscopy and thermal analysis establish acrylate crosslinking and network formation. X-ray scattering reveals the composite reversibly converts between multilamellar and bicontinuous cubic structures as temperature is increased above 35 °C for composites containing protonated ethylene diamine linkages (un-buffered water or acidic buffer). The reversible changes in nanoarchitecture red shifts and broadens the collective plasmon (from 523 nm to 575 nm) of the composite, an observation attributed to re-organization of confined NPs from 2D sheets (lamellae) to 1D columns (bicontinuous cubic channels). Composites prepared in alkaline buffer do not undergo a structural conversion with temperature, retaining a multilamellar architecture. In addition to pH and thermo-responsivity, the composite swells reversibly in polar solvents, which acts to de-aggregate and aggregate the encapsulated NPs and varies the plasmon resonance by Δ52 nm. This work reports the first combined use of a polymer to achieve both the in situ synthesis of spatially confined plasmonic NPs and their reversible stimuli-triggered re-organization mediated by interconvertible changes in scaffold nanoarchitecture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Multiscale additive manufacturing of polymers using 3D photo-printable self-assembling ionic liquid monomers

3D photoprinting of a self-assembled ionic liquid (IL) monomer based liquid-crystalline mesophase introduces high-resolution nanoscale features (2–5 nm) into otherwise low-resolution (microscale features) polymer builds. A wide variety of geometric builds possessing internal hexagonal perforated lamellar (HPL) nanostructure containing ~2.4 nm diameter pores are fabricated by the digital light processing 3D printing of an aqueous mixture (61(w/w%)) of an ionic liquid monomer, 1-decyl-3-vinylimidazolium chloride, a co-monomer, polyethylene diacrylate (PEGDA, M n 575), and a visible light photo-initiator (eosin Y and triethanolamine). Vibrational spectroscopy and thermal analysis proves acrylate moiety polymerization occurs during printing but incomplete consumption of the IL vinyl groups. Post-printing exposure to UV light (λ 350 nm) completes vinyl polymerization serving to further improve nanostructure ordering as determined by SAXS. Solvent swelling (ethanol) induces a structural transformation to a body center cubic architecture accompanied by slight pore expansion (to 3.2 nm). The introduction of nanoscale features into low-resolution photo-printed polymers establishes a low-cost strategy for the additive manufacturing of multi-scale, structured nanoporous polymer membranes.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Ultrafiltration membranes from polymerization of self-assembled Pluronic block copolymer mesophases

Industrially, ultrafiltration (UF) membranes are produced through non-solvent induced phase separation (NIPS), but due to environmental hazards inherent to the NIPS process as well as the low surface porosity and fouling resistance of membranes produced via this method, an alternative route to UF membranes is desirable. Here, this work presents the self-assembly of Pluronic block copolymers in the presence of water and a monomeric phase as a new technique for the preparation of UF membranes without the need for organic solvent or post-modification. Different compositions of block copolymer, water, and monomer were polymerized to obtain both hexagonal and lamellar mesostructures, as indicated by small angle X-ray scattering (SAXS) and cross-polarized light microscopy. As-synthesized membranes were found to have pore sizes in the range of 3–4 nm with a molecular weight cutoff of 1500 g/mol and displayed both excellent fouling resistance and high permeance of water, vastly outperforming a conventional NIPS UF membrane. Additionally, in contrast to NIPS, the proposed method provides flexibility in terms of both the final membrane chemistry and pore size. As such, it is a versatile approach that can be easily tailored to produce membranes for a wide range of applications including wastewater treatment and food processing.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Design principles from multiscale simulations to predict nanostructure in self-assembling ionic liquids

Molecular dynamics simulations (up to the nanoscale) were performed on the 3-methyl-1-pentylimidazolium ionic liquid cation paired with three anions; chloride, nitrate, and thiocyanate as aqueous mixtures, using the effective fragment potential (EFP) method, a computationally inexpensive way of modeling intermolecular interactions. The simulations provided insight (preferred geometries, radial distribution functions and theoretical proton NMR resonances) into the interactions within the ionic domain and are validated against 1 H NMR spectroscopy and small- and wide-angle X-ray scattering experiments on 1-decyl-3-methylimidazolium. Ionic liquids containing thiocyanate typically resist gelation and form poorly ordered lamellar structures upon mixing with water. Conversely, chloride, a strongly coordinating anion, normally forms strong physical gels and produces well-ordered nanostructures adopting a variety of structural motifs over a very wide range of water compositions. Nitrate is intermediate in character, whereby upon dispersal in water it displays a range of viscosities and self-assembles into nanostructures with considerable variability in the fidelity of ordering and symmetry, as a function of water content in the binary mixtures. The observed changes in the macro and nanoscale characteristics were directly correlated to ionic domain structures and intermolecular interactions as theoretically predicted by the analysis of MD trajectories and calculated RDFs. Specifically, both chloride and nitrate are positioned in the plane of the cation. Anion to cation proximity is dependent on water content. Thiocyanate is more susceptible to water insertion into the second solvent shell. Experimental 1 H NMR chemical shifts monitor the site-specific competition dependence with water content in the binary mixtures. As a result, thiocyanate preferentially sits above and below the aromatic ring plane, a state disallowing interaction with the protons on the imidazolium ring.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Characterization of detonation soot produced during steady and overdriven conditions for three high explosive formulations

The detonation of high explosives (HE) produces a dense fluid of molecular gases and solid carbon. The solid detonation carbon contains various carbon allotropes such as detonation nanodiamonds, onion-like carbon, graphite and amorphous carbon, with the formation of the different forms dependent upon pressure, temperature and the environmental conditions of the detonation. We have collected solid carbon residues from controlled detonations of three HE formulations (Composition B-3, PBX 9501, and PBX 9502). Soot was collected from experiments designed to produce both steady and overdriven conditions, and from detonations in both an ambient (air) atmosphere and in an inert Ar atmosphere. Differences in solid carbon residues were quantified using X-ray photoelectron spectroscopy and carbon isotope measurements. Environmental conditions, HE formulation, and peak pressures influenced the amount of and isotopic composition of the carbon in the soot. Detonations in an Ar atmosphere produced greater amounts of carbon soot with lower δ 13 C values than those in ambient air. Therefore, solid carbon residues continued to evolve after detonation due to excess oxygen in the ambient air detonations. As well, higher peak pressures in overdriven conditions produced less carbon soot with, in general, higher δ 13 C values. Consequently, while overdriven conditions only produced peak pressures for a limited duration, it was enough to influence the composition of the solid carbon residues.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Cascade synthesis of a gold nanoparticle-network polymer composite

In this paper, the multi-step, cascade synthesis of a self-supporting, hierarchically-structured gold nanoparticle hydrogel composite is described. The composite is spontaneously prepared from a non-covalent, lamellar lyotropic mesophase composed of amphiphiles that support the reactive constituents, a mixture of hydroxyl- and acrylate-end-derivatized PEO 117 -PPO 47 -PEO 117 and [AuCl 4 ] - . The reaction sequence begins with the auto-reduction of aqueous [AuCl 4 ] - by PEO 117 -PPO 47 -PEO 117 which leads to both the production of Au NPs and the free radical initiated polymerization and crosslinking of the acrylate endderivatized PEO 117 -PPO 47 -PEO 117 to yield a network polymer. Optical spectroscopy and TEM monitored the reduction of [AuCl 4 ] - , formation of large aggregated Au NPs and oxidative etching into a final state of dispersed, spherical Au NPs. ATR/FT-IR spectroscopy and thermal analysis confirms acrylate crosslinking to yield the polymer network. X-ray scattering (SAXS and WAXS) monitored the evolution of the multilamellar structured mesophase and revealed the presence of semi-crystalline PEO confined within the water layers. The hydrogel could be reversibly swollen without loss of the well-entrained Au NPs with full recovery of composite structure. Finally, optical spectroscopy shows a notable red shift (Δλ~ 45 nm) in the surface plasmon resonance between swollen and contracted states, demonstrating solvent-mediated modulation of the internal NP packing arrangement.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Minding the Gap

Neutron & X-ray scattering provides nano- to meso-scale details of complex fluid structure; 1D electronic density maps dervied from SAXS yield molecular level insights; Neutron reflectivity provides substructure details of substrate supported complex fluids; Complex fluids composition can be optimized to support a wide variety of both soluble and membrane proteins; The water gap dimensions can be finely tuned through polymer component.

Material Science↗