Engineering topics

Fittje, James

Publications and source records attributed to Fittje, James.

6 records

NASA NTRS2019

Missions to Triton and Pluto using a Hopper Vehicle with In-Situ Refueling

The Triton Hopper is a NASA Innovative Advanced Concepts (NIAC) project to design a mission to not merely land, but repeatedly fly across the surface of Triton, utilizing the volatile surface ices (primarily nitrogen) as propellant for a radioisotope-heated thermal rocket engine to launch across the surface and explore all the moon's varied terrain. An engineering design study of the vehicle and mission was done. With a calculated range of 20 km per hop, equator-to-pole mobility can be achieved over a primary mission duration of 2 years. Using Nuclear Electric Propulsion for the transfer vehicle, the same concept can be applied for a mission to the surface of Pluto.

Landis, Geoffrey A.↗

NASA NTRS2019

A Kuiper Belt Object Orbiter Enabled By 10 kW Kilopower Electric Propulsion

Recently, the New Horizons spacecraft flew by the Kuiper Belt Object Ultima Thule 13 years after launch. While flybys are a necessary 'first look' at the object in question a more comprehensive evaluation of the object will require an orbiter. Due to these object’s low mass a chemical propulsion system is not a viable option for entering their shallow gravity wells. The Dawn mission showed that solar electric propulsion is significantly better at the task of reaching low mass objects, but at Kuiper belt distances solar power is not a viable choice. A small nuclear reactor based on the recent kilopower ground test could provide 1-10 kWe of power for an electric propulsion system. The NASA Compass Team developed a Nuclear Electric Propulsion Kuiper Belt Object Orbiter to explore what a vehicle would look like to orbit these deep space objects.

Kuiper belt Object↗

NASA NTRS2019

Compass Final Report: Europa Tunnelbot

The Compass Final Report: Europa Tunnelbot, is a summary of three Compass concurrent engineering team designs for penetrating the ice of Europa and reaching the ocean, while sampling for biomarkers and communicating back to the surface. These conceptual designs, while providing complete conceptual layouts for these penetrators, or 'Tunnelbots' along with the associated communication 'Repeaters' primarily focused on the power and thermal systems needed for these devices. Trades for these systems will provide advantages and challenges for each option. These results will be used to guide power technology development.

probe↗

NASA NTRS2015

An Evaluation of the Impacts of AF-M315E Propulsion Systems for Varied Mission Applications

The purpose of the AF-M315E COMPASS study is to identify near-term (3-5 years) and long term (5 years +) opportunities for infusion, specifically the thruster and associated component technologies being developed as part of the GPIM project. Develop design reference missions which show the advantages of the AF-M315E green propulsion system. Utilize a combination of past COMPASS designs and selected new designs to demonstrate AF-M315E advantages. Use the COMPASS process to show the puts and takes of using AF-M315E at the integrated system level.

AF-M315E↗

NASA NTRS2014

Venus Landsailer Zephyr

Imagine sailing across the hot plains of Venus! A design for a craft to do just this was completed by the COncurrent Multidisciplinary Preliminary Assessment of Space Systems (COMPASS) Team for the NASA Innovative Advanced Concepts (NIAC) project. The robotic craft could explore over 30 kilometers of the surface of Venus, driven by the power of the wind. The Zephyr Venus Landsailer is a science mission concept for exploring the surface of Venus with a mobility and science capability roughly comparable to the Mars Exploration Rovers (MER) mission, but using the winds of the thick atmosphere of Venus for propulsion. It would explore the plains of Venus in the year 2025, near the Venera 10 landing site, where wind velocities in the range of 80 to 120 centimeters per second (cm/s) were measured by earlier Soviet landing missions. These winds are harnessed by a large wing/sail which would also carry the solar cells to generate power. At around 250 kilograms (kg), Zephyr would carry an 8 meter tall airfoil sail (12 square meters area), 25 kg of science equipment (mineralogy, grinder, and weather instruments) and return 2 gigabytes of science over a 30 day mission. Due to the extreme temperatures (450 degrees Centigrade) and pressures (90 bar) on Venus, Zephyr would have only basic control systems (based on high temperature silicon carbide (SiC)electronics) and actuators. Control would come from an orbiter which is in turn controlled from Earth. Due to the time delay from the Earth a robust control system would need to exist on the orbiter to keep Zephyr on course. Data return and control would be made using a 250 megahertz link with the orbiter with a maximum data rate of 2 kilobits per second. At the minimal wind speed required for mobility of 35 cm/s, the vehicle move at a slow but steady 4 cm/s by positioning the airfoil and use of one wheel that is steered for pointing control. Navigation commands from the orbiter will be based upon navigation cameras, simple accelerometers and stability sensors; Zephyr's stability is robust, using a wide wheel base along with controls to "feather" or "luff" the airfoil and apply brakes to stop the vehicle in the case of unexpected conditions. This would be the science gathering configuration. The vehicle itself would need to be made from titanium (Ti) as the structural material, with a corrosion-barrier overcoating due to extreme temperatures on the surface.

Wind Sailing↗

NASA NTRS2011

Kuiper Belt Object Orbiter Using Advanced Radioisotope Power Sources and Electric Propulsion

A joint NASA GRC/JPL design study was performed for the NASA Radioisotope Power Systems Office to explore the use of radioisotope electric propulsion for flagship class missions. The Kuiper Belt Object Orbiter is a flagship class mission concept projected for launch in the 2030 timeframe. Due to the large size of a flagship class science mission larger radioisotope power system building blocks were conceptualized to provide the roughly 4 kW of power needed by the NEXT ion propulsion system and the spacecraft. Using REP the spacecraft is able to rendezvous with and orbit a Kuiper Belt object in 16 years using either eleven (no spare) 420 W advanced RTGs or nine (with a spare) 550 W advanced Stirling Radioisotope systems. The design study evaluated integrating either system and estimated impacts on cost as well as required General Purpose Heat Source requirements.

Oleson, Steven R.↗