Search NASASearch

Engineering topics

Flannelly, W. G.

Publications and source records attributed to Flannelly, W. G..

Analytical testing

Analytical methods for combining flight acceleration and strain data with shake test mobility data to predict the effects of structural changes on flight vibrations and strains are presented. This integration of structural dynamic analysis with flight performance is referred to as analytical testing. The objective of this methodology is to analytically estimate the results of flight testing contemplated structural changes with minimum flying and change trials. The category of changes to the aircraft includes mass, stiffness, absorbers, isolators, and active suppressors. Examples of applying the analytical testing methodology using flight test and shake test data measured on an AH-1G helicopter are included. The techniques and procedures for vibration testing and modal analysis are also described.

Flannelly, W. G.

Rotor dynamic simulation and system identification methods for application to vacuum whirl data

Methods of using rotor vacuum whirl data to improve the ability to model helicopter rotors were developed. The work consisted of the formulation of the equations of motion of elastic blades on a hub using a Galerkin method; the development of a general computer program for simulation of these equations; the study and implementation of a procedure for determining physical parameters based on measured data; and the application of a method for computing the normal modes and natural frequencies based on test data.

Berman, A.

Application of antiresonance theory to helicopters

Antiresonance theory is the principle underlying nonresonant nodes in a structure, and covers both nonresonant nodes occurring naturally and those introduced by devices such as dynamic absorbers and antiresonant isolators. The dynamic antiresonant vibration isolator (DAVI) and the nodale module are examples of the applications of transfer antiresonances. It is shown that antiresonances are eigenvalues, and that they can be determined by matrix iteration. Applications of antiresonance theory to helicopter engineering problems, using the antiresonant eigenvalue equation are suggested.

Bartlett, F. D., Jr.

Identification of structural parameters from helicopter dynamic test data

A method is presented for obtaining the mass, stiffness, and damping parameters of a linear mathematical model, having fewer degrees of freedom than the structure it represents, directly from dynamic response measurements on the actual helicopter without a priori knowledge of the physical characteristics of the fuselage. The only input information required in the formulation is the approximate natural frequency of each mode and mobility data measured proximate to these frequencies with sinusoidal force excitation applied at only one point on the vehicle. The practicality and numerical soundness of the theoretical development was demonstrated through a computer simulation of an experimental program.

Giansante, N.