Search NASA⌕ Search

Engineering topics

Flytzani-Stephanopoulos, Maria

Publications and source records attributed to Flytzani-Stephanopoulos, Maria.

At least 19 records

Enhancing the Carbon Monoxide Oxidation Performance through Surface Defect Enrichment of Ceria-Based Supports for Platinum Catalyst

Effective synthesis and application of single-atom catalysts on supports lacking enough defects remain a significant challenge in environmental catalysis. Herein, we present a universal defect-enrichment strategy to increase the surface defects of CeO 2 -based supports through H 2 reduction pretreatment. The Pt catalysts supported by defective CeO 2 -based supports, including CeO 2 , CeZrO x , and CeO 2 /Al 2 O 3 (CA), exhibit much higher Pt dispersion and CO oxidation activity upon reduction activation compared to their counterpart catalysts without defect enrichment. Specifically, Pt is present as embedded single atoms on the CA support with enriched surface defects (CA-HD) based on which the highly active catalyst showing embedded Pt clusters (Pt C ) with the bottom layer of Pt atoms substituting the Ce cations in the CeO 2 surface lattice can be obtained through reduction activation. Embedded PtC can better facilitate CO adsorption and promote O 2 activation at Pt C –CeO 2 interfaces, thereby contributing to the superior low-temperature CO oxidation activity of the Pt/CA-HD catalyst after activation.

36 MATERIALS SCIENCE↗

Design of Dilute Palladium–Indium Alloy Catalysts for the Selective Hydrogenation of CO 2 to Methanol

Adding small amounts of a more reactive dopant metal to a more selective host metal is a well-known strategy for promoting the catalytic reactivity of the latter without sacrificing its selectivity. While substantial attention has been given to coinage metal hosts for activating individual C–H or O–H bonds, less attention has been given to more exotic metals, such as indium, which is highly selective in the complex hydrogenation of CO 2 to methanol. Herein, we describe the synthesis and properties of Pd–In alloys containing Pd in various states of aggregation (isolated atom, small clusters, and extended clusters) assessed through various characterization methods. These materials exhibit unique catalytic behaviors, with Pd promoting both the reaction rate and methanol selectivity in all cases, though its efficacy is highest when Pd is present in small clusters. Here, the inefficiency of high Pd loadings is due in part to losses in Pd accessibility, while the importance of aggregated vs isolated Pd is theorized to result from accelerated H 2 activation. Methods used to synthesize more conventional dilute-limit and single-atom alloy catalysts can, therefore, be extended to non-coinage metal hosts to promote and control more complex chemistries, though the roles of ensemble size may greatly differ.

36 MATERIALS SCIENCE↗

Highly stable preferential carbon monoxide oxidation by dinuclear heterogeneous catalysts

Atomically dispersed catalysts have been shown highly active for preferential oxidation of carbon monoxide in the presence of excess hydrogen (PROX). However, their stability has been less than ideal. We show here that the introduction of a structural component to minimize diffusion of the active metal center can greatly improve the stability without compromising the activity. Using an Ir dinuclear heterogeneous catalyst (DHC) as a study platform, we identify two types of oxygen species, interfacial and bridge, that work in concert to enable both activity and stability. In conclusion, the work sheds important light on the synergistic effect between the active metal center and the supporting substrate and may find broad applications for the use of atomically dispersed catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pt Atomic Single-Layer Catalyst Embedded in Defect-Enriched Ceria for Efficient CO Oxidation

The local coordination structure of metal sites essentially determines the performance of supported metal catalysts. Here, using a surface defect enrichment strategy, we successfully fabricated Pt atomic single-layer (Pt ASL ) structures with 100% metal dispersion and precisely controlled local coordination environment (embedded vs adsorbed) derived from Pt single-atoms (Pt 1 ) on ceria-alumina supports. The local coordination environment of Pt 1 not only governs its catalytic activity but also determines the Pt 1 structure evolution upon reduction activation. For CO oxidation, the highest turnover frequency can be achieved on the embedded Pt ASL in the CeO 2 lattice, which is 3.5 times of that on the adsorbed Pt ASL on the CeO 2 surface and 10–70 times of that on Pt1. The favorable CO adsorption on embedded Pt ASL and improved activation/reactivity of lattice oxygen within CeO 2 effectively facilitate the CO oxidation. This work provides new insights for the precise control of the local coordination structure of active metal sites for achieving 100% atomic utilization efficiency and optimal intrinsic catalytic activity for targeted reactions simultaneously.

36 MATERIALS SCIENCE↗

Atomically dispersed supported metal species as catalysts for alcohol conversion, and hydrogen and chemicals production

Supported single metal atoms are a new class of catalyst in which precious metals can be used at the ultimate limit of atom efficiency. While great strides have been made in demonstrating the potential of single-atom catalysts for many industrial reactions, there remains much debate in the literature over the nature of the active sites and the reaction mechanisms. The major goal of this project was to elucidate how atomic dispersions of metals on oxide supports enable catalytic reactions and how to stabilize such active sites for practical catalyst development. This is particularly important for the reactions of interest to fuel reforming for hydrogen generation in which atomically-dispersed metal ions on various oxide surfaces have been identified as the active sites. Working with trace amounts of precious metals is both fundamentally intriguing and of great practical interest in our continual search for low-cost, efficient and stable catalysts for the conversion of fuels to hydrogen under highly demanding operating conditions. A second major goal of the project was to rationally design and prepare single atom alloy (SAA) catalyst compositions based on information gathered from surface science studies on model catalysts and by catalytic evaluation of nanoparticle SAA analogs under realistic conditions. The overarching goal was to use the knowledge garnered from this project to design and develop new catalysts at the single atom limit, which can be applied to selective hydrogenation reactions (alkynes and dienes to alkenes) and the dehydrogenation of methanol and ethanol to value-added products at near-ambient conditions. Detailed information about the results of the project are given below.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Replication Data for: Mechanistic and Electronic Insights into a Working NiAu Single-Atom Alloy Ethanol Dehydrogenation Catalyst

The data underlying this published work have been made publicly available in this repository as part of the IMASC Data Management Plan. This work was supported as part of the Integrated Mesoscale Architectures for Sustainable Catalysis (IMASC), an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences under Award # DE-SC0012573.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanistic and Electronic Insights into a Working NiAu Single-Atom Alloy Ethanol Dehydrogenation Catalyst

Elucidation of reaction mechanisms and the geometric and electronic structure of the active sites themselves is a challenging, yet essential task in the design of new heterogeneous catalysts. Such investigations are best implemented via a multi-pronged approach that comprises ambient pressure catalysis, surface science, and theory. Herein, we employ this strategy to understand the workings of NiAu single-atom alloy (SAA) catalysts for the selective non-oxidative dehydrogenation of ethanol to acetaldehyde and hydrogen. The atomic dispersion of Ni is paramount for selective ethanol to acetaldehyde conversion, and we show that even the presence of small Ni ensembles in the Au surface results in the formation of undesirable byproducts via C-C scission. Spectroscopic, kinetic, and theoretical investigations of the reaction mechanism reveal that both C-H and O-H bond cleavage steps are kinetically relevant and single Ni atoms are confirmed as the active sites. X-ray absorption spectroscopy studies allow us to follow the charge of the Ni atoms in the Au host before, under, and after a reaction cycle. Specifically, in the pristine state the Ni atoms carry a partial positive charge which increases upon coordination to the electronegative oxygen in ethanol and decreases upon desorption. Furthermore, this type of oxidation state cycling during reaction is similar to the behavior of single-site homogenous catalysts. Given the unique electronic structure of many single-site catalysts, such a combined approach in which the atomic-scale catalyst structure and charge state of the single atom dopant can be monitored as a function of its reactive environment is a key step towards developing structure function relationships that inform the design of new catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-principles design of a single-atom–alloy propane dehydrogenation catalyst

The complexity of heterogeneous catalysts means that a priori design of new catalytic materials is difficult, but the well-defined nature of single-atom–alloy catalysts has made it feasible to perform unambiguous theoretical modeling and precise surface science experiments. Herein we report the theory-led discovery of a rhodium-copper (RhCu) single-atom–alloy catalyst for propane dehydrogenation to propene. Although Rh is not generally considered for alkane dehydrogenation, first-principles calculations revealed that Rh atoms disperse in Cu and exhibit low carbon-hydrogen bond activation barriers. Surface science experiments confirmed these predictions, and together these results informed the design of a highly active, selective, and coke-resistant RhCu nanoparticle catalyst that enables low-temperature nonoxidative propane dehydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Replication Data for: Dilute Pd/Au Alloy Nanoparticles Embedded in Colloid-Templated Porous SiO 2 : Stable Au-Based Oxidation Catalysts

The data underlying this published work have been made publicly available in this repository as part of the IMASC Data Management Plan. This work was supported as part of the Integrated Mesoscale Architectures for Sustainable Catalysis (IMASC), an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences under Award # DE-SC0012573.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single-step selective oxidation of methane to methanol in the aqueous phase on iridium-based catalysts

In this work, one-step conversion of methane to methanol using molecular oxygen as the oxidant in the presence of CO in aqueous solutions on copper or palladium promoted Ir-ZSM-5 catalyst is first reported. The addition of a second metal to Ir-ZSM-5 promotes the catalyst activity, while product selectivity can be tuned either to methanol on IrCu-ZSM-5 or to formic acid exclusively on IrPd-ZSM-5. Most effective is the combination of the three metal species together. Approximately 1200 μmol/g cat methanol, or ~23.4 mol of methanol per mol of Ir, are formed on the IrCuPd trimetallic system (methanol selectivity ~80 %) at 150 °C in 1 h. Our results also demonstrate that atomically dispersed Ir(I)(CO) 2 species formed in the presence of CO can activate the C–H bond of methane to methyl species at temperatures below 150 °C. The good stability in cyclic operation is an additional attribute, rendering this type of catalyst a “front-runner” in future catalyst development for direct methane-to-liquid oxygenates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A stable low-temperature H 2 -production catalyst by crowding Pt on α-MoC

The water-gas shift (WGS) reaction is an industrially important source of pure hydrogen (H 2 ) at the expense of carbon monoxide and water. This reaction is of interest for fuel-cell applications, but requires WGS catalysts that are durable and highly active at low temperatures. Here we demonstrate that the structure (Pt 1 Pt n )/α-MoC, where isolated platinum atoms (Pt 1 ) and subnanometre platinum clusters (Pt-n) are stabilized on alpha-molybdenum carbide (α-MoC), catalyses the WGS reaction even at 313 kelvin, with a hydrogen-production pathway involving direct carbon monoxide dissociation identified. We find that it is critical to crowd the α-MoC surface with Pt 1 and Pt n species, which prevents oxidation of the support that would cause catalyst deactivation, as seen with gold/α-MoC, and gives our system high stability and a high metal-normalized turnover number of 4,300,000 moles of hydrogen per mole of platinum. We anticipate that the strategy demonstrated here will be pivotal for the design of highly active and stable catalysts for effective activation of important molecules such as water and carbon monoxide for energy production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Developing single-site Pt catalysts for the preferential oxidation of CO: A surface science and first principles-guided approach

Here, we report a comprehensive study combining surface science, Density Functional Theory (DFT) calculations, and catalyst synthesis, characterization, and testing to investigate the preferential oxidation of CO in the presence of H 2 over single-site Pt 1 /Cu x O catalysts. Surface science studies show that while Pt 1 /Cu x O model surfaces enable low-temperature CO oxidation via a Mars-van Krevelen mechanism, there was no evidence for H 2 activation or oxidation. DFT-based calculations explain these results and demonstrate that the H 2 oxidation barrier is high as compared to H 2 desorption from Pt 1 /Cu x O. Inspired by these model catalyst studies, nanoporous Pt 1 /Cu x O catalysts were synthesized and demonstrated to be active and highly selective for the preferential oxidation of CO. This work highlights the potential of combined surface science, theory, and catalyst studies for identifying new catalytic materials, which in this case led to the development of a promising single-site Pt 1 /Cu x O catalyst for the preferential oxidation of CO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single-Atom Alloy Catalysis

Single-Atom Alloys (SAAs) play an increasingly significant role in the field of single-site catalysis and are typically composed of catalytically active elements atomically dispersed in more inert, but more catalytically selective host metals. SAAs have been shown to catalyze a range of industrially important reactions in thermal, photo- and electro-catalysis studies. Due to the unique geometry of SAAs, the location of the transition state and the binding site of reaction intermediates are often decoupled, which can enable both facile dissociation of reactants and weak binding of intermediates, two key factors for efficient and selective catalysis. Often, this results in deviations from transition metal scaling relationships that limit conventional catalysts. SAAs also offer reduced susceptibility to CO poisoning, cost savings from reduced precious metal usage, opportunities for bifunctional mechanisms via spillover, and higher resistance to deactivation by coking that plagues many industrial catalysts. In this review, we begin by introducing SAAs and describe how model systems and real catalysts can be prepared and characterized. Finally, we then review all available SAA literature on a per reaction basis before concluding with a description of the general properties of this new class of heterogeneous catalysts and presenting opportunities for future research and development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-loading single Pt atom sites [Pt-O(OH) x ] catalyze the CO PROX reaction with high activity and selectivity at mild conditions

The preferential oxidation of CO (PROX) in hydrogen-rich fuel gas streams is an attractive option to remove CO while effectively conserving energy and H 2 . However, high CO conversion with concomitant high selectivity to CO 2 but not H 2 O is challenging. Here, we report the synthesis of high-loading single Pt atom (2.0 weight %) catalysts with oxygen-bonded alkaline ions that stabilize the cationic Pt. The synthesis is performed in aqueous solution and achieves high Pt atom loadings in a single-step incipient wetness impregnation of alumina or silica. Promisingly, these catalysts have high CO PROX selectivity even at high CO conversion (~99.8% conversion, 70% selectivity at 110°C) and good stability under reaction conditions. These findings pave the way for the design of highly efficient single-atom catalysts, elucidate the role of –OH species in CO oxidation, and confirm the absence of a support effect for our case.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PdCu Single Atom Alloys for the Selective Oxidation of Methanol to Methyl Formate at Low Temperatures

The selective catalytic oxidation of methanol to methyl formate (MF) has been considered as an attractive route to produce MF, an important precursor in the chemical industry. Although supported Pd nanoparticles are active for the selective oxidation of methanol to MF, the relatively low MF selectivity and yield remains an unsolved issue. Here in this paper, we show that adding a small amount of Pd into Cu forming PdCu single atom alloy (SAA) catalysts can catalyze the oxidation of methanol to MF selectively at low temperatures, with a high catalyst stability. The atomic dispersion of Pd atoms in the Cu matrix was confirmed by various in-situ characterization techniques. The activity and selectivity of PdCu SAA catalysts were compared to monometallic Cu and Pd catalysts, in a flow reactor at similar conditions. This work may guide the design of new SAA based catalysts for selective oxidation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single-atom gold oxo-clusters prepared in alkaline solutions catalyse the heterogeneous methanol self-coupling reactions

We report the direct use of inorganometallic gold complexes formed in alkaline solutions as robust heterogeneous catalysts. Specifically, mononuclear gold complexes with the gold atom surrounded by a shell of Na cations through -O- linkages were prepared by dissolving Au(OH) 3 in highly alkaline solutions of NaOH. The complexes remain intact upon impregnation onto supports or after drying in air to a crystalline powder. Supported catalysts containing exclusively atomic gold at loadings up to 1.2 wt.% Au were prepared. Either in supported or unsupported form, the mononuclear gold-centered oxo-clusters catalyze the selective methanol dehydrogenation reaction to methyl formate (MF) and hydrogen; a reaction of industrial interest as well as the key step in methanol steam reforming. The [Au1-Ox]- center was identified as the active catalytic site by experimental characterization and density functional theory studies. The methanol dehydrogenation reaction mechanism proceeds via the self-coupling of methanol to MF. No oxygen supply is necessary. Hence, hydrogen rather than water is produced at 2:1 (stoichiometric) molar ratio to MF. The dried crystalline powder of the solution was used as an unsupported catalyst, showing the same chemistry as the supported clusters. Ab initio molecular dynamics (AIMD) simulations of methanol self-coupling on the mononuclear gold clusters revealed the formation of formate spectators on the clusters under reaction conditions, also corroborated by in situ DRIFTS. The inclusion of these spectators proved crucial towards the accurate description of the energetics of self-coupling of methanol on these clusters, thus unravelling the nature of the active site. Catalyst stability up to 250-300 oC in reaction conditions is demonstrated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surpassing the single-atom catalytic activity limit through paired Pt-O-Pt ensemble built from isolated Pt 1 atoms

Despite the maximized metal dispersion offered by single-atom catalysts, further improvement of intrinsic activity can be hindered by the lack of neighboring metal atoms in these systems. Here we report the use of isolated Pt 1 atoms on ceria as “seeds” to develop a Pt-O-Pt ensemble, which is well-represented by a Pt 8 O 14 model cluster that retains 100% metal dispersion. The Pt atom in the ensemble is 100–1000 times more active than their single-atom Pt 1 /CeO 2 parent in catalyzing the low-temperature CO oxidation under oxygen-rich conditions. Rather than the Pt-O-Ce interfacial catalysis, the stable catalytic unit is the Pt-O-Pt site itself without participation of oxygen from the 10–30 nm-size ceria support. Similar Pt-O-Pt sites can be built on various ceria and even alumina, distinguishable by facile activation of oxygen through the paired Pt-O-Pt atoms. Extending this design to other reaction systems is a likely outcome of the findings reported here.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗