The Virtual Test Bed (VTB) Repository: A Library of Reference Reactor Models Using NEAMS Tools
Not Available
22 GENERAL STUDIES OF NUCLEAR REACTORS↗
Engineering topics
Folk, Thomas
Publications and source records attributed to Folk, Thomas.
Methodology for Sensitivity Analysis of Homogenized Cross-Sections to Instantaneous and Historical Lattice Conditions with Application to AP1000® PWR Lattice
In the two-step method for nuclear reactor simulation, lattice physics calculations are performed to compute homogenized cross-sections for a variety of burnups and lattice configurations. A nodal code is then used to perform full-core analysis using the pre-calculated homogenized cross-sections. One source of uncertainty introduced in this method is that the lattice configuration or depletion conditions typically do not match a pre-calculated one from the lattice physics simulations. Therefore, some interpolation model must be used to estimate the homogenized cross-sections in the nodal code. This current study provides a methodology for sensitivity analysis to quantify the impact of state variables on the homogenized cross-sections. This methodology also allows for analyses of the historical effect that the state variables have on homogenized cross-sections. An application of this methodology on a lattice for the Westinghouse AP1000® reactor is presented where coolant density, fuel temperature, soluble boron concentration, and control rod insertion are the state variables of interest. The effects of considering the instantaneous values of the state variables, historical values of the state variables, and burnup-averaged values of the state variables are analyzed. Using these methods, it was found that a linear model that only considers the instantaneous and burnup-averaged values of state variables can fail to capture some variations in the homogenized cross-sections.
Price, Dean (ORCID:0000000309990111)↗
Safeguards Technical Objectives for Thorium Molten Salt Reactor Fuel Cycles
China, Denmark, France, India, Indonesia, the United Kingdom, and the United States, among others, are exploring commercial thorium fuel cycles for domestic power production and/or international export. For any thorium fuel cycle facilities built and/or operated in a non-nuclear weapon State with a comprehensive safeguards agreement, those facilities and any associated nuclear material would be subject to international nuclear safeguards by the International Atomic Energy Agency (IAEA). Thorium fuel cycle facilities offered for the application of safeguards under a voluntary offer agreement by a nuclear weapon State would also be subject to safeguards, if selected by the IAEA. Compared to uranium/plutonium fuel cycle facilities, thorium fuel cycle facilities are comparatively diverse from an inspection and accounting perspective, differing greatly in material type, form, and design from uranium/plutonium fuel cycle facilities and also from each other. Of these, the most complex thorium fuel cycles – and therefore likely the most challenging to the implementation of international nuclear safeguards – are those that include thorium molten salt reactors. With thorium fuel cycles approaching near-term commercial deployment timelines, it is imperative that the international nuclear safeguards community begins to think about how to adapt existing international nuclear safeguards concepts and approaches to thorium fuel cycles, as well as mitigate any gaps that may exist. This paper focuses on the development of recommended safeguards technical objectives for efficient and effective application of international nuclear safeguards measures (e.g., containment / surveillance, non-destructive assay, destructive assay, environmental sampling) to thorium molten salt reactors.
22 GENERAL STUDIES OF NUCLEAR REACTORS↗