Search NASA⌕ Search

Engineering topics

Folkedahl, Bruce

Publications and source records attributed to Folkedahl, Bruce.

Computed Tomography Scanning and Petrophysical Measurements of Eastern Williston Basin Twin Buttes and Hagel Formations

The computed tomography (CT) facilities and the Multi-Sensor Core Logger (MSCL) at the U.S. Department of Energy’s (DOE) National Energy Technology Laboratory (NETL) in Morgantown, West Virginia, were used to characterize core from two wells that represent coal resources across North Dakota. These include the MC23080C Well in Mercer County and the 23-B001 Well in Oliver County. The primary impetus of this work was to capture a detailed digital representation of the core from the MC23080C and 23-B001 Wells. The collaboration between the NETL and the Energy and Environment Research Center (EERC) enables other research entities to access information about this potential carbon ore, rare earth, and critical mineral resource plays in the Williston Basin. All equipment and techniques used were non-destructive, enabling future examinations and analyses to be performed on these cores. Fractures, discontinuities, and millimeter-scale features were readily detectable with the medical CT scanner acquired images. Imaging with the NETL medical CT scanner was performed on entire cores. Qualitative analysis of the medical CT images, coupled with X-ray fluorescence (XRF), gamma density, and magnetic susceptibility measurements from the MSCL were useful in identifying zones of interest for potential future analysis. Higher-resolution industrial and micro-CT images were acquired from selected zones along the depth of the core to visualize the structure in higher detail. The ability to quickly identify key areas for more detailed study with higher resolution will save time and resources in future studies. The combination of methods used provides a multi-scale analysis of the core, with the resulting macro- and micro-descriptions relevant to many subsurface energy-related examinations traditionally performed at NETL.

01 COAL, LIGNITE, AND PEAT↗

CORECM Williston Basin Twin Butte and Hagel Coal Wells

Computed tomography and core logger data described in Technical Report "Computed Tomography Scanning and Petrophysical Measurements of Eastern Williston Basin Twin Buttes and Hagel Formations" by Paronish et al., 2024

Coal↗

Round-Robin Interlaboratory Study on Rare-Earth Elements in U.S.-Based Geologic Materials

In a study funded by the U.S. Department of Energy (DOE) National Energy Technology Laboratory (NETL), the University of North Dakota (UND) Energy and Environmental Research Center (EERC) performed a first-of-its-kind round-robin interlaboratory study (RRIS) to determine lab-to-lab and method-to-method variability in analyzing the rare earth element (REE) content of domestic resources. Analyses of REEs on eleven different materials were accomplished by the laboratories using four different procedures: ASTM D6357 (Procedure A), ASTM D4503 (Procedure B), an alternate in-house procedure for digestion and REE analysis (Procedure C), and neutron activation analysis (NAA). The results of the RRIS suggest that NAA is the most accurate and reliable method for many of the REEs in these types of materials; however, the method is limited in that it is able to determining only ten of the sixteen REEs. Five of the seven labs reporting data for Procedure A and three of the five labs reporting for Procedure B showed excellent performance in terms of repeatability, reproducibility, agreement with NAA, and SRM recoveries based on AOAC International guidelines on method performance. This indicates that when strictly followed these methods are suitable for REE determination in most materials, although are subject to the overall capabilities and experience of individual laboratories.

58 GEOSCIENCES↗

SUBTASK 2.3 – SUPPORT OF DOE CARBON CAPTURE SYSTEMS DEVELOPMENT AND MODELING

The ultimate goal of this project is to reduce uncertainty in the deployment of carbon capture and storage (CCS) technologies by overcoming key challenges through a combination of experimentation and modeling studies. The studies focused on key areas of concern for CCS systems and worked to increase overall confidence in the technology. To achieve project goals, the Energy & Environmental Research Center (EERC) identified the following objectives: Determine the potential impacts of coal combustion-derived aerosols on solvent emissions, solvent degradation, and fouling of postcombustion CO2 capture systems. Identify methods to control the formation of aerosols. Evaluate, quantify, and document the regional impacts that could result from implementation of CO2 capture technologies and enhanced oil recovery. Support U.S. Department of Energy (DOE) modeling efforts by providing key information to help reduce the uncertainty of future CCS projects and increase investor and public confidence in the technologies. Four activities were executed to support this effort, and the detailed results of these activities are presented herein. This project was cofunded through the EERC–DOE Joint Program on Research and Development for Fossil Energy-Related Resources Cooperative Agreement No. DE-FE0024233. Nonfederal funding was provided by the North Dakota Industrial Commission, Mitsubishi Heavy Industries America, Minnkota Power Cooperative, ALLETE, and the Lignite Energy Council.

01 COAL, LIGNITE, AND PEAT↗

Subtask 5.3 - Water and Energy Sustainability and Technology

The overall goal of this Energy & Environmental Research Center project was to evaluate water capture technologies in a carbon capture and sequestration system and perform a complete systems analysis of the process to determine potential water minimization opportunities within the entire system. To achieve that goal, a pilot-scale liquid desiccant dehumidification system (LDDS) was fabricated and tested in conjunction with a coal-fired combustion test furnace outfitted with CO{sub 2} mitigation technologies, including the options of oxy-fired operation and postcombustion CO{sub 2} capture using an amine scrubber. The process gas stream for these tests was a coal-derived flue gas that had undergone conventional pollutant control (particulates, SO{sub 2}) and CO{sub 2} capture with an amine-based scrubber. The water balance data from the pilot-scale tests show that the packed-bed absorber design was very effective at capturing moisture down to levels that approach equilibrium conditions.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

WMU Power Generation Study Task 2.0 Corn Cob Co-Combustion Study: Final Report

Much attention has been focused on renewable energy use in large-scale utilities and very small scale distributed energy systems. However, there is little information available regarding renewable energy options for midscale municipal utilities. The Willmar Municipal Utilities Corn Cob-Coal Co-Combustion Project was initiated to investigate opportunities available for small to midscale municipal utilities to "go green". The overall goal of the Project was to understand the current renewable energy research and energy efficiency projects that are or have been implemented at both larger and smaller scale and determine the applicability to midscale municipal utilities. More specific objectives for Task 2.0 of this project were to determine the technical feasibility of co-combusting com cobs with coal in the existing WMU boiler, and to identify any regulatory issues that might need to be addressed if WMU were to obtain a significant portion of its heat from such co-combustion. This report addresses the issues as laid out in the study proposal. The study investigated the feasibility of and demonstrated the technical effectiveness of co-combusting corn cobs with coal in the Willmar Municipal Utilities stoker boiler steam generation power plant. The results of the WMU Co-Combustion Project will serve as a model for other midscale utilities who wish to use corn cobs to generate renewable electrical energy. As a result of the Co-Combustion Project, the WMU plans to upgrade their stoker boiler to accept whole corn cobs as well as other types of biomass, while still allowing the fuel delivery system to use 100% coal as needed. Benefits of co-combustion will include: energy security, reduced Hg and CO 2 air emissions, improved ash chemistry, potential future carbon credit sales, an immediate positive effect on the local economy, and positive attention focused on the WMU and the City of Willmar. The first step in the study was to complete a feasibility analysis. The feasibility analysis anticipated only positive results from the combustion of corn cobs with coal in the WMU power plant boiler, and therefore recommended that the project proceed. The study proceeded with a review of the existing WMU Power Plant configuration; cob fuel analyses; an application for an Air Quality Permit from the Minnesota Pollution Control Agency to conduct the co-combustion test burns; identification of and a site visit to a similar facility in Iowa; an evaluation of cob grinding machines; and agreements with a corn grower, a cob harvester, and the City of Willmar to procure, harvest, and store cobs. The WMU power plant staff constructed a temporary cob feed system whereby the cobs could be injected into the #3 Boiler firebox, at rates up to 40% of the boiler total heat input. Test burns were conducted, during which air emissions were monitored and fuel and ash samples analyzed. The results of the test burns indicated that the monitored flue gas quality improved slightly during the test burns. The WMU was able to determine that modifications to the #3 Boiler fuel feed system to accept com cobs on a permanent basis would be technically feasible and would enable the WMU to generate electricity from renewable fuels on a dispatchable basis.

09 BIOMASS FUELS↗

JV Task-Long-Kiln NOx Reduction Study

Field sampling was conducted by the Energy & Environmental Research Center at two Lafarge North America cement kiln locations in Canada. Emissions including SO{sub x}, NO{sub x}, and particulate were measured and reported at various locations throughout the kilns. At each site data were collected on two kilns during field sampling. However, only Kiln 1 at the Ravena site was utilized for modeling efforts. Experimental work was then conducted to estimate the effectiveness of various NO{sub x} control techniques on limiting both NO{sub x} and SO{sub x} emissions in cement kiln exhaust. Theory-based models were constructed to estimate both NO{sub x} and SO{sub x} emissions from cement kilns. These models were then applied to estimating the impact of various NO{sub x} control strategies on kiln exhaust emissions. The sulfur model constructed as part of this work was successful at predicting SO{sub 2} emissions and sulfur capture in the Alpena kiln. This model is designed to run as a postprocessing step that uses the output of a NO{sub x} model as input. With an accurate NO{sub x} model, the sulfur model may prove to be a valuable tool in estimating the impact of kiln modifications on sulfur emissions. The NO{sub x} model was also applied to model several operating scenarios on three of Lafarge's kilns: Alpena 20/21, Alpena 22/23, and Ravena 1. The predictions of the flue gas temperature at the kiln feed end, the kiln shell heat loss, the quality of clinker, and the excess O{sub 2} in the flue gas are consistent with the audit data. The developed simulation tool in this project has proven to be an effective way to investigate the NO{sub x} emissions, to optimize kiln performance, and to assess changes in operating condition on kiln performance.

54 ENVIRONMENTAL SCIENCES↗