Using L-shell X-ray Spectra to Determine Conditions of Non-LTE Plasmas
Abstract not provided
Engineering topics
Publications and source records attributed to Foord, M E.
Abstract not provided
Abstract not provided
The focusing properties of a laser generated proton beam have been investigated using hemispherical targets in both freestanding and enclosed cone-shaped geometries. The proton trajectories and focusing were strongly affected by the electric fields in the beam, bending the trajectories near the axis. In the cone targets, a sheath field effectively channels the proton beam through the open cone tip, substantially improving the beam focusing from Almost-Equal-To 90 {mu}m to Almost-Equal-To 55 {mu}m diameter for protons with energies >3 MeV. The proton generation and focusing were modeled using 2D hybrid particle-in-cell simulations, which compared well with the experimental results. Simulations predict further improvement in focusing with more uniform target illumination. These results are of significant interest to proton fast ignition and other high energy density physics applications.
Abstract not provided
The conversion efficiency from laser energy into proton kinetic energy is measured with the 0.6 ps, 9x10{sup 19} W/cm{sup 2} Titan laser at the Jupiter Laser Facility as a function of target thickness in Au foils. For targets thicker than 20 {mu}m, the conversion efficiency scales approximately as 1/L, where L is the target thickness. This is explained by the domination of hot electron collisional losses over adiabatic cooling. In thinner targets, the two effects become comparable, causing the conversion efficiency to scale weaker than 1/L; the measured conversion efficiency is constant within the scatter in the data for targets between 5 and 15 {mu}m, with a peak conversion efficiency of 4% into protons with energy greater than 3 MeV. Depletion of the hydrocarbon contaminant layer is eliminated as an explanation for this plateau by using targets coated with 200 nm of ErH{sub 3} on the rear surface. The proton acceleration is modeled with the hybrid-particle in cell code LSP, which reproduced the conversion efficiency scaling observed in the data.
Recent theoretical work suggests that the conversion efficiency from laser to protons in laser irradiated thin foil experiments increases if the atomic mass of nonhydrogen atoms on the foil rear surface increases. Experiments were performed at the Lawrence Livermore National Laboratory Jupiter Laser Facility to observe the effect of thin foils coated with erbium hydride on the conversion efficiency from laser to protons. Gold foils with and without the rear surface coated with ErH{sub 3} were irradiated using the ultrashort pulse, 40 TW Callisto laser. An argon-ion etching system was used to remove naturally occurring nanometer thick surface layer contaminants from the hydride. With the etcher, gold with ErH{sub 3} showed a 25% increase in the conversion efficiency to protons above 3.4 MeV relative to contaminants, where C{sup +4} and H{sup +} were the dominant ion species. No difference in the ion signal was observed without first cleaning the hydrides. Simulations using the hybrid PIC code, LSP, revealed that the increase due to erbium hydride versus contaminants is 37% for protons above 3 MeV.