Search NASA⌕ Search

Engineering topics

Forman, R.

Publications and source records attributed to Forman, R..

31 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Measurement of high-temperature thermal conductivity of Lucalox /Al2O3/ using a heat pipe technique.

The thermal conductivity of Lucalox, a high-purity form of aluminum oxide, has been measured over the temperature range from 870 to 1400 C. The technique employed is a novel one using a lithium-filled heat pipe in series with a gas-gap variable-heat-conductance unit as a heat source. The procedure makes it possible to measure heat flux through the sample directly. The measurements indicate that the thermal conductivity of high-purity aluminum oxide has a minimum value of about 0.05 W/cm deg C at 950 C and increases with higher temperatures to values in the range of 0.3 W/cm deg C at 1400 C.

Forman, R.↗
NASA NTRS1971

Technique for measuring high-temperature thermal conductivity of solids by the use of a heat pipe.

A suggested technique for accurately measuring thermal conductivity of solids in the temperature range 800-1500 C is presented. The procedure employs the sample to be tested in series combination with a high-temperature heat pipe and a heat-transfer device, which has a variable thermal conductance. By changing the thermal conductance of the heat-transfer unit and measuring the change in heat-pipe power input to maintain a constant heat-pipe temperature, one can accurately measure the heat flux through the sample in conjunction with the temperature drop across it. This steady-state technique has some inherent advantages over methods currently employed to measure thermal conductivity at elevated temperatures.

Forman, R.↗
NASA NTRS1970

Stainless steel 301 and Inconel 718 hydrogen embrittlement

Conditions and results of tensile tests of 26 Inconel 718 and four cryoformed stainless steel specimens are presented. Conclusions determine maximum safe hydrogen operating pressure for cryogenic pressure vessels and provide definitive information concerning flaw growth characteristics under the most severe temperature and pressure conditions

Allgeier, R. K.↗
NASA NTRS1970

Re-examination of heat pipe startup

Reassessment of Cotter model startup in Li heat pipe, modifying model by moving sonic point to end of hot zone and including wall friction and condensation

Forman, R.↗