Search NASA⌕ Search

Engineering topics

Forrest, Katherine A.

Publications and source records attributed to Forrest, Katherine A..

10 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Crystal Engineering of Two Light and Pressure Responsive Physisorbents

Abstract An emerging strategy in the design of efficient gas storage technologies is the development of stimuli‐responsive physisorbents which undergo transformations in response to a particular stimulus, such as pressure, heat or light. Herein, we report two isostructural light modulated adsorbents (LMAs) containing bis‐3‐thienylcyclopentene (BTCP), LMA‐1 [Cd(BTCP)(DPT) 2 ] (DPT=2,5‐diphenylbenzene‐1,4‐dicarboxylate) and LMA‐2 [Cd(BTCP)(FDPT) 2 ] (FDPT=5‐fluoro‐2,diphenylbenzene‐1,4‐dicarboxylate). Both LMAs undergo pressure induced switching transformations from non‐porous to porous via adsorption of N 2 , CO 2 and C 2 H 2 . LMA‐1 exhibited multi‐step adsorption while LMA‐2 showed a single‐step adsorption isotherm. The light responsive nature of the BTPC ligand in both frameworks was exploited with irradiation of LMA‐1 resulting in a 55 % maximum reduction of CO 2 uptake at 298 K. This study reports the first example of a switching sorbent (closed to open) that can be further modulated by light.

Castell, Dominic C.↗
DOE OSTI2023

Crystal Engineering of Two Light and Pressure Responsive Physisorbents

Abstract An emerging strategy in the design of efficient gas storage technologies is the development of stimuli‐responsive physisorbents which undergo transformations in response to a particular stimulus, such as pressure, heat or light. Herein, we report two isostructural light modulated adsorbents (LMAs) containing bis‐3‐thienylcyclopentene (BTCP), LMA‐1 [Cd(BTCP)(DPT) 2 ] (DPT=2,5‐diphenylbenzene‐1,4‐dicarboxylate) and LMA‐2 [Cd(BTCP)(FDPT) 2 ] (FDPT=5‐fluoro‐2,diphenylbenzene‐1,4‐dicarboxylate). Both LMAs undergo pressure induced switching transformations from non‐porous to porous via adsorption of N 2 , CO 2 and C 2 H 2 . LMA‐1 exhibited multi‐step adsorption while LMA‐2 showed a single‐step adsorption isotherm. The light responsive nature of the BTPC ligand in both frameworks was exploited with irradiation of LMA‐1 resulting in a 55 % maximum reduction of CO 2 uptake at 298 K. This study reports the first example of a switching sorbent (closed to open) that can be further modulated by light.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Reversible transformations between the non-porous phases of a flexible coordination network enabled by transient porosity

Abstract Flexible metal–organic materials that exhibit stimulus-responsive switching between closed (non-porous) and open (porous) structures induced by gas molecules are of potential utility in gas storage and separation. Such behaviour is currently limited to a few dozen physisorbents that typically switch through a breathing mechanism requiring structural contortions. Here we show a clathrate (non-porous) coordination network that undergoes gas-induced switching between multiple non-porous phases through transient porosity, which involves the diffusion of guests between discrete voids through intra-network distortions. This material is synthesized as a clathrate phase with solvent-filled cavities; evacuation affords a single-crystal to single-crystal transformation to a phase with smaller cavities. At 298 K, carbon dioxide, acetylene, ethylene and ethane induce reversible switching between guest-free and gas-loaded clathrate phases. For carbon dioxide and acetylene at cryogenic temperatures, phases showing progressively higher loadings were observed and characterized using in situ X-ray diffraction, and the mechanism of diffusion was computationally elucidated.

Chemistry↗
DOE OSTI2022

Methane storage in flexible and dynamical metal–organic frameworks

Recently, there has been significant interest in methane as an abundant and cleaner burning alternative to fossil fuels. Consequently, the design of media capable of the storage of methane under practical conditions has become an area of significant interest to the scientific community. While metal−organic frameworks have seen pronounced examination for this application, flexible metal−organic framework variants have been little examined despite having tremendous promise for methane storage applications. This work provides an overview of the current state of the art regarding the investigation of these systems for the purpose of providing a baseline for future research.

Forrest, Katherine A.↗
DOE OSTI2022

Self-Adjusting Metal–Organic Framework for Efficient Capture of Trace Xenon and Krypton

The capture of the xenon and krypton from nuclear reprocessing off-gas is essential to the treatment of radioactive waste. Although various porous materials have been employed to capture Xe and Kr, the development of high-performance adsorbents capable of trapping Xe/Kr at very low partial pressure as in the nuclear reprocessing off-gas conditions remains challenging. Herein, we report a self-adjusting metal-organic framework based on multiple weak binding interactions to capture trace Xe and Kr from the nuclear reprocessing off-gas. The self-adjusting behavior of ATC-Cu and its mechanism have been visualized by the in-situ single-crystal X-ray diffraction studies and theoretical calculations. The self-adjusting behavior endows ATC-Cu unprecedented uptake capacities of 2.65 and 0.52 mmol g -1 for Xe and Kr respectively at 0.1 bar and 298 K, as well as the record Xe capture capability from the nuclear reprocessing off-gas. Further, our work not only provides a benchmark Xe adsorbent but proposes a new route to construct smart materials for efficient separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Metal–Organic Framework Based Hydrogen-Bonding Nanotrap for Efficient Acetylene Storage and Separation

The removal of carbon dioxide (CO 2 ) from acetylene (C 2 H 2 ) is a critical industrial process for manufacturing high purity C 2 H 2 . However, it remains challenging to address the trade-off between adsorption capacity and selectivity, on account of their similar physical properties and molecular sizes. To overcome this difficulty, here we report a novel strategy involving the regulation of hydrogen-bonding nanotrap on the pore surface to promote the separation of C 2 H 2 /CO 2 mixtures, in three isostructural metal-organic frameworks (MOFs, named as MIL-160, CAU-10H, and CAU-23, respectively). Among them, MIL-160, which has abundant hydrogen-bonding acceptors as nanotraps, can selectively capture acetylene molecules and demonstrates ultra-high C 2 H 2 storage capacity (191 cm 3 g –1 , or 213 cm 3 cm –3 ) but much less CO 2 uptake (90 cm 3 g –1 ) under ambient conditions. The C 2 H 2 adsorption amount of MIL-160 is remarkably higher than the other two isostructural MOFs (86 cm 3 g –1 and 119 cm 3 g –1 for CAU-10H and CAU-23 respectively) under the same conditions. More importantly, both simulation and experimental breakthrough results show that MIL-160 sets a new benchmark for equimolar C 2 H 2 /CO 2 separation in terms of the separation potential (Δq break = 5.02 mol/kg) and C 2 H 2 productivity (6.8 mol/kg). In addition, in-situ FT-IR experiments combined with computational modeling further reveal that the unique host-guest multiple hydrogen-bonding interactions between the nanotrap and C 2 H 2 is the key factor for achieving extraordinary acetylene storage capacity and superior C 2 H 2 /CO 2 selectivity. Furthermore, this work provides a novel and powerful approach to address the trade-off of this extremely challenging gas separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Breaking the trade-off between selectivity and adsorption capacity for gas separation

It is generally recognized that porous solids (sorbents) with high selectivity and high adsorption capacity offer potential for energy-efficient gas separations. Unfortunately, there is generally a trade-off between capacity and selectivity, which represents a roadblock to the utility of sorbents in key industrial processes. For example, acetylene (C 2 H 2 ), an important fuel and chemical intermediate, is produced with CO 2 as an impurity, and the similar physicochemical properties of C 2 H 2 and CO 2 mean that most sorbents are poorly selective. Hybrid ultramicroporous materials (HUMs) are candidates for gas separations as they exhibit benchmark selectivity for several key gas pairs. Unfortunately, existing HUMs are handicapped by low capacity. Here, we report a new HUM, SIFSIX-21-Ni, that addresses the trade-off between selectivity and capacity that has plagued sorbents, as its high uptake and high selectivity renders it the new benchmark for C 2 H 2 /CO 2 separation performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Amino‐Functionalised Hybrid Ultramicroporous Materials that Enable Single‐Step Ethylene Purification from a Ternary Mixture

Abstract Pyrazine‐linked hybrid ultramicroporous (pore size <7 Å) materials (HUMs) offer benchmark performance for trace carbon capture thanks to strong selectivity for CO 2 over small gas molecules, including light hydrocarbons. That the prototypal pyrazine‐linked HUMs are amenable to crystal engineering has enabled second generation HUMs to supersede the performance of the parent HUM, SIFSIX‐3‐Zn , mainly through substitution of the metal and/or the inorganic pillar. Herein, we report that two isostructural aminopyrazine‐linked HUMs, MFSIX‐17‐Ni (17=aminopyrazine; M=Si, Ti), which we had anticipated would offer even stronger affinity for CO 2 than their pyrazine analogs, unexpectedly exhibit reduced CO 2 affinity but enhanced C 2 H 2 affinity. MFSIX‐17‐Ni are consequently the first physisorbents that enable single‐step production of polymer‐grade ethylene (>99.95 % for SIFSIX‐17‐Ni ) from a ternary equimolar mixture of ethylene, acetylene and CO 2 thanks to coadsorption of the latter two gases. We attribute this performance to the very different binding sites in MFSIX‐17‐Ni versus SIFSIX‐3‐Zn .

Mukherjee, Soumya↗
DOE OSTI2021

Amino‐Functionalised Hybrid Ultramicroporous Materials that Enable Single‐Step Ethylene Purification from a Ternary Mixture

Abstract Pyrazine‐linked hybrid ultramicroporous (pore size <7 Å) materials (HUMs) offer benchmark performance for trace carbon capture thanks to strong selectivity for CO 2 over small gas molecules, including light hydrocarbons. That the prototypal pyrazine‐linked HUMs are amenable to crystal engineering has enabled second generation HUMs to supersede the performance of the parent HUM, SIFSIX‐3‐Zn , mainly through substitution of the metal and/or the inorganic pillar. Herein, we report that two isostructural aminopyrazine‐linked HUMs, MFSIX‐17‐Ni (17=aminopyrazine; M=Si, Ti), which we had anticipated would offer even stronger affinity for CO 2 than their pyrazine analogs, unexpectedly exhibit reduced CO 2 affinity but enhanced C 2 H 2 affinity. MFSIX‐17‐Ni are consequently the first physisorbents that enable single‐step production of polymer‐grade ethylene (>99.95 % for SIFSIX‐17‐Ni ) from a ternary equimolar mixture of ethylene, acetylene and CO 2 thanks to coadsorption of the latter two gases. We attribute this performance to the very different binding sites in MFSIX‐17‐Ni versus SIFSIX‐3‐Zn .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗