Search NASASearch

Engineering topics

Forward, R. L.

Publications and source records attributed to Forward, R. L..

At least 19 records

Application of Synergistic Multipayload Assistance with Rotating Tethers (SMART) Concept to Outer Planet Exploration

We propose an innovative approach to outer planet exploration using the Synergistic Multipayload Assistance with Rotating Tethers (SMART) concept invented by Gerald David Nordley. The basic concept can be implemented in many different ways to accomplish many different types of planetary missions, especially missions to the outer planets. Additional information is contained in the original extended abstract.

Forward, R. L.

Rotating gravity gradiometer study

Two rotating gravity gradiometer (RGG) sensors, along with all the external electronics needed to operate them, and the fixtures and special test equipment needed to fill and align the bearings, were assembled in a laboratory, and inspected. The thermal noise threshold of the RGG can be lowered by replacing a damping resistor in the first stage electronics by an active artificial resistor that generates less random voltage noise per unit bandwidth than the Johnson noise from the resistor it replaces. The artificial resistor circuit consists of an operational amplifier, three resistors, and a small DC to DC floating power supply. These are small enough to be retrofitted to the present circuit boards inside the RGG rotor in place of the 3 Megohm resistor. Using the artificial resistor, the thermal noise of the RGG-2 sensor can be lowered from 0.3 Eotvos to 0.15 Eotvos for a 10 sec integration time.

Forward, R. L.

Future lunar gravity measurements

Future missions to the moon should include a detailed high-resolution global gravity survey from a low (15-30 km) polar orbiting spacecraft. The use of gravity gradiometer instruments on board the spacecraft will give higher-resolution data at lower total mission cost than the present Doppler tracking technique. Simulations show that although a three axis gradiometer system is preferred, and can even be used to estimate spacecraft attitude and altitude variation, a properly oriented single rotating gravity gradiometer can be used to resolve closely spaced mascons in both the along-track and cross-track directions.

Forward, R. L.

Measurement of solar gravitational oblateness with gravity gradiometers

A very high sensitivity rotating gravity gradiometer onboard the spacecraft is described for measuring the gravitational oblateness of the Sun during a solar probe mission. The proposed instrument would be a self-contained structure in a thermal-vacuum-magnetic shield in the shape of a cross, with a mass of 20 kg and arm length of 1.0 m and thickness of 0.1 m. The sensor inside would have a resonant frequency of 1/30 Hz, a mechanical Q of one million and would use gravitational radiation antenna technology to achieve a sensitivity of 6 x 10 to the minus 8th power Eotvos, which would provide a measurement of the solar oblateness to an accuracy of 1.5 to 6 x 10 to the minus 8th power. The gravity gradiometer will require a spinning spacecraft, so that it will not sense the spacecraft gravity fields, but the gradiometer does not need to be at the spacecraft center of mass, or even on the spacecraft spin axis. Major problem areas to be addressed are demonstration of the instrument sensitivity prior to flight and the measurement and compensation for any residual spacecraft angular rates.

Forward, R. L.

A bibliography on the search for extraterrestrial intelligence

This report presents a uniform compilation of works dealing with the search for extraterrestrial intelligence. Entries are by first author, with cross-reference by topic index and by periodical index. This bibliography updates earlier bibliographies on this general topic while concentrating on research related to listening for signals from extraterrestrial intelligence.

Mallove, E. F.

Rotating Gravity Gradiometer Study

The application of a Rotating Gravity Gradiometer (RGG) system on board a Lunar Polar Orbiter (LPO) for the measurement of the Lunar gravity field was investigated. A data collection simulation study shows that a gradiometer will give significantly better gravity data than a doppler tracking system for the altitudes under consideration for the LOP, that the present demonstrated sensitivity of the RGG is adequate for measurement of the Lunar gravity gradient field, and that a single RGG instrument will provide almost as much data for geophysical interpretation as an orthogonal three axis RGG system. An engineering study of the RGG sensor/LPO spacecraft interface characteristics shows that the RGG systems under consideration are compatible with the present models of the LPO spacecraft.

Forward, R. L.

Advanced propulsion concepts study: Comparative study of solar electric propulsion and laser electric propulsion

Solar electric propulsion (SEP) and laser electric propulsion (LEP) was compared. The LEP system configuration consists of an 80 kW visible laser source on earth, transmitting via an 8 m diameter adaptively controlled phased array through the atmosphere to a 4 m diameter synchronous relay mirror that tracks the LEP spacecraft. The only significant change in the SEP spacecraft for an LEP mission is the replacement of the two 3.7 m by 33.5 m solar cell arrays with a single 8 m diameter laser photovoltaic array. The solar cell array weight is decreased from 320 kg to 120 kg for an increase in payload of 200 kg and a decrease in specific mass of the power system from 20.5 kg/kW to 7.8 kg/kW.

Forward, R. L.

Development of a rotating gravity gradiometer for earth orbit applications (AAFE)

Some preliminary mission studies are described along with the design, fabrication, and test of a breadboard model of an earth orbital, rotating gravity gradiometer with a design goal of 10 to the minus 11th power/sec sq (0.01 EU) in a 35-sec integration time. The proposed mission uses a Scout vehicle to launch one (or two orthogonally oriented) spin-stabilized satellites into a 330-km circular polar orbit some 20 days before an equinox. During the short orbital lifetime, the experiment would obtain two complete maps of the gravity gradient field with a resolution approaching 270 km (degree 75). The breadboard model of the gradiometer demonstrated a combined thermal and electronic noise threshold of 0.015 EU per data channel. The design changes needed to reduce the noise to less than 0.01 EU were identified. Variations of the sensor output signal with temperature were experimentally determined and a suitable method of temperature compensation was developed and tested. Other possible error sources, such as sensor interaction with satellite dynamics and magnetic fields, were studied analytically and shown to be small.

Forward, R. L.

Rotating tensor sensors

Differential force sensors using tensor rotation properties to separate force effects from gradient effects

FORCE