Search NASA⌕ Search

Engineering topics

Foucher, Alexandre C.

Publications and source records attributed to Foucher, Alexandre C..

40 records · Page 3

Synthesis of Mo 4 VAlC 4 MAX Phase and Two-Dimensional Mo 4 VC 4 MXene with Five Atomic Layers of Transition Metals

MXenes are a family of two-dimensional (2D) transition metal carbides, nitrides, and carbonitrides with a general formula of M n+1 X n T x , in which two, three, or four atomic layers of a transition metal (M: Ti, Nb, V, Cr, Mo, Ta, etc.) are interleaved with layers of C and/or N (shown as X), and T x represents surface termination groups such as –OH, =O, and –F. Here, we report the scalable synthesis and characterization of a MXene with five atomic layers of transition metals (Mo 4 VC 4 T x ), by synthesizing its Mo 4 VAlC 4 MAX phase precursor that contains no other MAX phase impurities. These phases display twinning at their central M layers which is not present in any other known MAX phases or MXenes. Transmission electron microscopy and X-ray diffraction were used to examine the structure of both phases. Energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, Raman spectroscopy, and high-resolution scanning transmission electron microscopy with energy-dispersive X-ray spectroscopy were used to study the composition of these materials. Density functional theory calculations indicate that other five transition metal-layer MAX phases (M' 4 M"AlC 4 ) may be possible, where M' and M" are two different transition metals. The predicted existence of additional Al-containing MAX phases suggests that more M 5 C 4 T x MXenes can be synthesized. Additionally, we characterized the optical, electronic, and thermal properties of Mo 4 VC 4 T x . Here, this study demonstrates the existence of an additional subfamily of M 5 X 4 T x MXenes as well as a twinned structure, allowing for a wider range of 2D structures and compositions for more control over properties, which could lead to many different applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Achieving High Selectivity for Alkyne Hydrogenation at High Conversions with Compositionally Optimized PdAu Nanoparticle Catalysts in Raspberry Colloid-Templated SiO 2

Improving the selectivity for catalytic hydrogenation of alkynes is a key step in upgrading feedstocks for olefin polymerization. Herein, dilute Pd x Au 1-x alloy nanoparticles embedded in raspberry colloidtemplated silica (x = 0.02, 0.04, and 0.09) are demonstrated to be highly active and selective for the gas-phase hydrogenation of 1-hexyne, exhibiting higher selectivity than pure Pd at high conversion. The conversion of 1-hexyne remains high even for the very low amounts of Pd in Pd 0.02 Au 0.98 . These catalysts are highly resistant to sintering—addressing a long-standing challenge in the use of Au-based catalysts. Clear evidence is presented that the addition of the second hydrogen to the halfhydrogenated intermediate is the rate-limiting step, and that the stability of the half-hydrogenated intermediate of the alkyne is higher than the half-hydrogenated alkene which explains the high selectivity even at high conversions. Moreover, of the three compositions investigated, optimum selectivity and activity is observed for the nanoparticles containing 4% Pd. The apparent activation energy for production of 1-hexene from 1-hexyne is measured to be 38 kJ mol -1 for the Pd 0.04 Au 0.96 catalysts, which is ~14 kJ mol -1 lower than for pure Pd. The hydrogenation is completely, but reversibly, suppressed by adding CO to the reactant mixture, indicating that the Pd centers are the active sites for reaction. The method of templating used in preparation of the catalysts is highly customizable and versatile. As a result, this study demonstrates that the composition of the nanoparticles as defined by the dilution ratio of Pd in Au and by the method used to make the supported catalyst are important tunable parameters that can be used to optimize activity and selectivity of bimetallic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

“Intelligent” Pt Catalysts Studied on High-Surface-Area CaTiO 3 Films

CaTiO 3 -supported Pt is sometimes referred to as an “Intelligent” catalyst because Pt can reversibly leave or enter the perovskite lattice following high-temperature reduction or oxidation; however, slow egress-ingress kinetics associated with large perovskite crystallites make these systems impractical. In this study, thin films (~1 nm) of CaTiO 3 were deposited onto MgAl 2 O 4 and then examined as catalyst supports for Pt and Pd. While Pd/CaTiO 3 /MgAl 2 O 4 showed adsorption and CO-oxidation properties that were essentially the same as Pd/MgAl 2 O 4 , the Pt/CaTiO 3 /MgAl 2 O 4 catalyst exhibited evidence for strong support interactions. Pt/CaTiO 3 /MgAl 2 O 4 showed high activity for CO oxidation following reduction at 1073 K, even though CO adsorption was suppressed; but the catalysts were dramatically less active after oxidation at 1073 K and reduction at 773 K. Both Pt/CaTiO 3 /MgAl 2 O 4 and a catalyst formed by ex-solution of CaTi 0.95 Pt 0.05 O 3 exhibited very low rates for toluene hydrogenation in comparison to Pt/MgAl 2 O 4 . Scanning Transmission Electron Microscopy (STEM) and Energy Dispersive Spectroscopy (EDS) showed that the CaTiO 3 films uniformly covered the MgAl 2 O 4 surface after both reduction and oxidation at 1073 K. Pt particles on reduced Pt/CaTiO 3 /MgAl 2 O 4 exhibited an unusual rhombohedral shape and may be flat, a further indication of strong interactions between the metal and the support. Low Energy Ion Scattering (LEIS) indicated that high-temperature reduction caused a restructuring of the CaTiO 3 . Lastly, the implications of these results for understanding catalysts formed by ex-solution of metals from a perovskite lattice are discussed.

36 MATERIALS SCIENCE↗