Search NASA⌕ Search

Engineering topics

Frame, Katherine C.

Publications and source records attributed to Frame, Katherine C..

Waste Characterization with WDAS and the Add-a-Source Method [Slides]

Why Neutron Counting? • Gamma rays can be attenuated making large items that include high Z material or nonuniformities problematic. • Neutrons are highly penetrating: — Low rate of interaction with matter — Can measure entire volume of item — Can measure large volume items — Reduces sampling errors • 3He neutron detectors are insensitive to interference by other gamma-emitting radionuclides. • Neutron Count Data can be obtained relatively rapidly. • Neutron rates are related to the amount of fissionable material. (Pu, U, etc. – what we need to safeguard). • The amount of fissionable material is related to the α-decay rate (often a key quantity for waste measurements). • Isotopic information is needed to determine total nuclear material mass (gamma-ray assay, destructive analysis, process knowledge).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

CMR Shuffler System: Passive Mode Calibration and Certification Report

Los Alamos National Laboratory has a number of spherical confinement vessels (CVs) remaining from tests involving nuclear materials. These vessels have an inner diameter of 6 feet with 1 to 2 inch thick steel walls. The goal of the Confinement Vessel Disposition (CVD) project is to remove debris and reduce contamination inside the vessels. As debris is removed from the vessels, material will be placed in waste drums. Far-field gamma ray assay will be used to determine when a drum is nearing a 239 Pu equivalent mass of less than 200 g. The drum will then be assayed using a waste drum shuffler operated in passive mode using a neutron coincidence counting method for accountability. This report focuses on the testing and calibration of the CMR waste drum shuffler in passive mode operation. Initial testing was performed to confirm previously accepted measurement parameters. The system was then calibrated using a set of weapons grade Pu (WGPu, 239 Pu > 93%) oxide standards placed inside a 55 gallon drum. The calibration data ranges from Pu mass of 0.5 g to 188.9 g. The CMR waste drum shuffler has been tested and calibrated in passive mode in preparation for safeguards accountability measurements of waste drums containing material removed from CVs for the CVD project.

36 MATERIALS SCIENCE↗

Confinement Vessel Assay System: Design and Implementation Report

Los Alamos National Laboratory has a number of spherical confinement vessels remaining from tests involving nuclear materials. These vessels have an inner diameter of 6 feet with 1- to 2-inch thick steel walls. The goal of the Confinement Vessel Disposition (CVD) project is to remove debris and reduce contamination inside the vessels. We have developed a neutron assay system for the purposes of Materials Control and Accountability (MC&A) measurements of the vessel prior to and after cleanout. We present our approach to confronting the challenges in designing, building, and testing such a system. The system was designed to meet a set of functional and operational requirements. A Monte Carlo model was developed to aid in optimizing the detector design as well as to predict the systematic uncertainty associated with confinement vessel measurements. Initial testing was performed to optimize and determine various measurement parameters, and then the system was characterized using 252 Cf placed a various locations throughout the measurement system. Measurements were also performed with a 252 Cf source placed inside of small steel and HDPE shells to study the effect of moderation. These measurements compare favorably with their MCNPX model equivalent, making us confident that we can rely on the Monte Carlo simulation to predict the systematic uncertainty due to variations in response to material that may be localized at different points within a vessel.

36 MATERIALS SCIENCE↗

Confinement Vessel Assay System: Calibration and Certification Report

Los Alamos National Laboratory has a number of spherical confinement vessels (CVs) remaining from tests involving nuclear materials. These vessels have an inner diameter of 6 feet with 1 to 2 inch thick steel walls. The goal of the Confinement Vessel Disposition (CVD) project is to remove debris and reduce contamination inside the vessels. The Confinement Vessel Assay System (CVAS) was developed to measure the amount of SNM in CVs before and after cleanout. Prior to cleanout, the system will be used to perform a verification measurement of each vessel. After cleanout, the system will be used to perform safeguards-quality assays of ≤ 100-g 239 Pu equivalent in a vessel for safeguards termination. The system was calibrated in three different mass regions (low, medium, and high) to cover the entire plutonium mass range that will be assayed. The low mass calibration and medium mass calibration were verified for material positioned in the center of an empty vessel. The systematic uncertainty due to position bias was estimated using an MCNPX model to simulate the response of the system to material localized at various points along the inner surface of the vessel. The background component due to cosmic ray spallation was determined by performing measurements of an empty vessel and comparing to measurements in the same location with no vessel present. The CVAS has been tested and calibrated in preparation for verification and safeguards measurements of CVs before and after cleanout.

36 MATERIALS SCIENCE↗

Nondestructive assay measurements of GNEP related materials

Because the reprocessing technologies that are currently being considered for the Global Nuclear Energy Partnership (GNEP) will keep various actinides commingled with plutonium at all times throughout the process, the resulting nuclear fuel that is intended for the Advanced Burner Reactor will present unique measurement challenges for the various Nondestructive Assay (NDA) techniques. In order to begin clarifying which types of materials and measurement scenarios that may exist within GNEP require the development of new measurement technologies, an initial series of measurements have been performed on materials with radiation properties that are similar to those being considered within GNEP.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗