Search NASA⌕ Search

Engineering topics

Frank G. Lemoine

Publications and source records attributed to Frank G. Lemoine.

DPOD2020: A DORIS Extension of the ITRF2020 for Precise Orbit Determination

As one of the tracking systems used to determine orbits of the altimeter mission satellites (such as TOPEX/Poseidon, Envisat, Jason-1/-2/-3, CryoSat-2, Saral/Altika, Sentinel-3A/-3B, HY-2A/C/D, Jason-CS/Sentinel-6A, SWOT), DORIS (Doppler Orbitography Radiopositionning Integrated by Satellite) allows to determine positions and velocities of tracking stations that define a stable reference for the estimation of the precise orbits and thus are fundamental for the quality of the altimeter data and derived mean sea level products. Due to the time evolution of the DORIS ground network, some stations included in the 2020 realization of the International Terrestrial Reference Frame (ITRF2020) have been decommissioned and since 2021.0 a few new stations were added to the tracking network. Therefore, to satisfy operational requirements for POD (Precise Orbit Determination) and routine delivery of geodetic products, the International DORIS Service (IDS) regularly updates the DPOD (DORIS terrestrial reference frame for Precise Orbit Determination). The DPOD solutions include mean positions and velocities of all the DORIS stations since 1993.0 derived from the stacking of the latest IDS weekly combined series aligned to the current ITRF. In this paper, we first present the stacking process of the DPOD2020 version 1.0. Then, we address the validation procedure of the DPO2020 including comparison with ITRF2020 and POD tests. For eighty percent of all the time segments of all the DORIS stations, the station position differences between DPOD2020 version 1.0 and ITRF2020 are smaller than ten millimeters. The major position differences between these two solutions are associated with the DORIS sites either localized in the South Atlantic Anomaly region or with time spans smaller than one year. Compared to DPOD2014, the DPOD2020 shows reduction of the main statistics of the DORIS-to-DORIS tie residuals (differences between the estimated and measured ties). The POD tests showed similar results for DPOD2020 and DPOD2014 for most of the altimetric satellites (TOPEX/Poseidon, Jason-1, CryoSat-2, Jason-3). In addition, we observed better POD results with DPOD2020 for the latest altimetric satellite Sentinel-3A as well as a slight degradation for Jason-2. That degradation was fully explained by slightly worst results for the stations localized in the South Atlantic Anomaly region.

DORIS↗

The International DORIS Service contribution to ITRF2020

For the realization of the 2020 International Terrestrial Reference Frame (ITRF2020), the International DORIS Service delivered to the International Earth Rotation and Reference Systems Service (IERS) a set of 1456 weekly solution files from 1993.0 to 2021.0 including station coordinates and Earth orientation parameters (EOPs). The data come from fourteen DORIS satellites: TOPEX/Poseidon, SPOT-2, SPOT-3, SPOT-4, SPOT-5, Envisat, Jason-1, Jason-2, Cryosat-2, Saral, HY-2A, Jason-3, Sentinel-3A and Sentinel-3B. In their processing, the four analysis centers which contributed to the DORIS combined solution used the latest time variable gravity models, the new mean pole and diurnal-subdiurnal tidal EOP models recommended by IERS. In addition, all the analysis centers included in their processing precise SPOT-5 solar panel angle values and quaternions for, at least, the Jason satellites. Furthermore, a new Alcatel phase center variation model was implemented for the ITRF2020 processing. The main objective of this study is to present the combination process and to analyze the impact of the new modeling on the performance of the new combined solution. Comparisons with the IDS contribution to ITRF2014 show that i) the application of the new phase center variations for the Alcatel DORIS ground antennas in the data processing combined with the gradual replacement over time of the Alcatel by Starec antennas implies a scale drift from 1993.0 to 2002.5 and ii) thanks to a better modeling of the surface forces on the satellites, the new combined solution shows smaller annual and 118-day signals in the geocenter. A new DORIS terrestrial reference frame was computed to evaluate the intrinsic quality of the new combined solution. That evaluation shows that over almost the full time span the intrinsic IDS scale values lie in a range of ±5 mm. After mid-2008, the new DORIS reference frame has an internal position consistency in North-East-Up better than 7.5 mm.

DORIS↗

Impact of DORISx Post Seismic Deformation and Seasonal Corrections on the DPOD2020 Solution

As one of the tracking systems used for the altimeter missions (such as TOPEX/Poseidon, Envisat, Jason-1/-2/-3, CryoSat-2, Saral/AltiKa, Sentinel-3A/-3B, HY-2A/C/D, Jason-CS/Sentinel-6A, SWOT), the position of the DORIS tracking stations provides a fundamental reference for the estimation of the precise orbits and so, by extension is fundamental for the quality of the altimeter data analysis and derived products. Due to the time evolution of the DORIS ground network, stations included in ITRF2020 may have been decommissioned and stations that were added to the tracking network after 2021.0 are, by definition, not part of ITRF2020. Therefore, to satisfy operational requirements for precise orbit determination and routine delivery of geodetic products, the International DORIS Service maintains the DORIS terrestrial reference frame for Precise Orbit Determination (DPOD) solutions. Since 2016, the DPOD products are computed by the IDS Combination Center (CC) as a DORIS cumulative position and linear velocity solution aligned to the latest available ITRF and using the latest IDS weekly combined series. Mid-2023, the IDS CC started the computation of the second version of the DPOD2020 based on the IDS 20 weekly solutions from 1993.0 to 2023.0. With that new solution, the IDS CC will include Post Seismic Deformation (PSD) corrections for some DORIS sites such as Socorro Island. These DPOD PSD corrections are determined from the analysis of DORIS coordinate time series only. The second version will also include optional annual and semi-annual station corrections. The presentation will describe the analysis used for extracting the PSD and seasonal DORIS station corrections, compare such corrections to those derived for ITRF2020, and evaluate the impact these new corrections have on station positioning and satellite POD.

Guilhem Moreaux↗

International DORIS Service (IDS): The IDS at 20 and the IVS at 25; Together on a Long Journey

This is an invited presentation to the the IVS General Meeting 2024 to celebrate the 25th anniversary of the International VLBI Service (IVS). The presentation shares aspects of the common journey of the International DORIS Service (IDS), and IVS over the last 20 years, as sibling services of the International Association of Geodesy, and as space geodetic techniques that contribute to the International Terrestrial Reference Frame (ITRF).

DORIS↗