Search NASA⌕ Search

Engineering topics

Frank Leone

Publications and source records attributed to Frank Leone.

17 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2024

Characterization of Low-Velocity Impact Damage in Toughened Non-Crimp Fabric Laminates

The damage response of resin-infused composites was investigated using quasi-static indentation (QSI) and instrumented drop-weight impact testing. The test specimens were composed of six layers of non-crimp fabrics where each layer contained +45°, 90°, −45°, and 0° plies. The goals of the testing were to identify damage responses that may differ from traditional thermoset materials and provide damage characterization data to evaluate current damage prediction analyses and aid improvements to current damage models. The damage was characterized using X-ray computed tomography (CT) and ultrasonic testing (UT). Incremental QSI loading was used on a single specimen to investigate damage growth in nine steps at progressively higher loads. Realtime acoustic emission data were used to determine the unloading points. Unlike typical thermoset composites, the force-displacement was smooth and showed no obvious indications of damage. The primary damage consisted of large lines of fiber fracture on the plies near the impact surface and delaminations through the thickness. Nine specimens were impacted at nominal impact energies of 25 ft-lbs, 30 ft-lbs, and 35 ft-lbs. The force histories at each energy followed nearly identical paths. Again, no obvious signs of damage were observed in any of the force histories. The general damage response in the dynamic tests was similar to the QSI-loaded specimens. However, repeat specimens impacted with a given impact energy showed variations in the damage. Some characteristics of the damage response were different than those typically observed in thermoset composites and will need to be evaluated using current analysis methods.

Composite Materials↗
NASA NTRS2023

Characterization of Low-Velocity Impact Damage in Thermoplastic Laminated Composites

The impact damage response of two thermoplastic material systems were compared over a range of impact energies. Eight-inch-square impact specimens with a 24-ply quasi-isotropic layup were manufactured from TC1225 LMPAEK T700G from Toray Industries and APC AS4D/PEKK-FC from Solvay. The effect of the degree of crystallinity (DOC) on the damage response was also investigated using a third set of specimens from the Toray material manufactured with reduced crystallinity. Using a combination of data obtained from X-ray computed tomography (CT) scans and ultrasonic testing (UT), detailed damage maps were created for every interface and ply for selected specimens. Using these damage maps, the delamination size, shape, and area were evaluated at each interface. The presence of fractured fibers was also identified on each ply. The LMPAEK material was found to have fewer and smaller delaminations than the PEKK specimens for impacts at the same energy. However, the LMPAEK specimens contained a larger number of fiber breaks. A similar trend was observed when comparing the baseline LMPAEK specimens with the low-crystallinity LMPAEK specimens. The low-crystallinity specimens had very little delamination but had a large number of plies with fiber breaks. In addition, the LMPAEK specimens often contained lines of fiber fractures in near-surface plies emanating from the contact region that were not present in the PEKK specimens.

Composite Materials↗
NASA NTRS2023

Characterization of Low-Velocity Impact Damage in Thermoplastic Laminated Composites

The impact damage response of two thermoplastic material systems were compared over a range of impact energies. Eight-inch-square impact specimens with a 24-ply quasi-isotropic layup were manufactured from TC1225 LMPAEK T700G from Toray Industries and APC AS4D/PEKK-FC from Solvay. The effect of the degree of crystallinity (DOC) on the damage response was also investigated using a third set of specimens from the Toray material manufactured with reduced crystallinity. Using a combination of data obtained from X-ray computed tomography (CT) scans and ultrasonic testing (UT), detailed damage maps were created for every interface and ply for selected specimens. Using these damage maps, the delamination size, shape, and area were evaluated at each interface. The presence of fractured fibers was also identified on each ply. The LMPAEK material was found to have fewer and smaller delaminations than the PEKK specimens for impacts at the same energy. However, the LMPAEK specimens contained a larger number of fiber breaks. A similar trend was observed when comparing the baseline LMPAEK specimens with the low-crystallinity LMPAEK specimens. The low-crystallinity specimens had very little delamination but had a large number of plies with fiber breaks. In addition, the LMPAEK specimens often contained lines of fiber fractures in near-surface plies emanating from the contact region that were not present in the PEKK specimens.

Composite Materials↗
NASA NTRSDate not supplied

Material Variability Effects on Damage Development Within Composite Adhesively Bonded Joints

Use of composite adhesively bonded joints (ABJ) is of critical importance to the adoption of composite materials in the automotive industry, as ABJ enable lower stress concentrations as compared to conventional mechanically fastened joints. ABJ are better suited for joining composite materials as compared to fastened joints because fastened joints require drilling of holes which locally affect composite material structure. Composite materials and adhesives are subject to unavoidable stochastic local material variations which make different failure scenarios possible. An experimentally tested ABJ configuration is simulated using finite element analysis (FEA). Experimentally, under tension, the joints failed by three major failure modes, with peak loads ranging from 13.0-16.1 kips. Progressive failure analysis tools are used to simulate damage development within each material within the joint. The simulation agreed well with the average experimental peak load. Stochastically occurring adhesive porosity and matrix-fiber micro-disbonding were numerically simulated. The simulations revealed a similar trend as observed experimentally: joints which failed at higher peak loads had lower levels of damage within the face-sheets of the composite panels which were adhesively bonded; these joints which failed at higher peak loads also had greater damage in the doubler of the experimentally tested double lap joint configuration.

Richard Larson↗
NASA NTRSDate not supplied

An Integrated Design Tool for Tow-Steered Laminates of Composites in Abaqus and MSC.Patran/Nastran

Tow-steered composites can be tailored for optimal mechanical performance of lightweight structures. However, there are no commercial-grade design tools for tow-steered composite structures, which hinders the design innovation of tow-steered composites in realistic structures. The novelty of this paper is to develop an integrated design framework along with the development of graphical user interface (GUI) plug-ins in commercial finite element (FE) software Abaqus and MSC.Patran/Nastran. The GUI plug-ins take all the design setups and communicate with external codes for the material modeling and optimization, and hence provide a unified design environment within the FE codes. The mechanics of structure genome (MSG) plate model computes shell element properties based on user-defined fiber paths and layup, which are defined via the GUI plug-ins. The optimization is performed by an open-source code, Dakota, from Sandia National Laboratories (Sandia), which also coordinates the structural analysis, material modeling, and optimization in design iterations. Two examples are presented to demonstrate the user-friendliness and versatility of the developed GUI plug-ins. The developed tools will ease the design process and facilitate the application of tow-steered composites in realistic aerospace structures.

Xin Liu↗
NASA NTRSDate not supplied

A Design Framework for Thick and Thin Tow-Steered Composites Using Mechanics of Structure Genome

The design of tow-steered composites is one of the most popular and promising topics under the class of variable stiffness structures. In this work, the authors propose a new design framework and tool for the optimization of tow-steered composites. Mechanics of structure genome (MSG) provides accurate computation of plate/shell section properties including thick and highly curved structures. The computed section properties can be directly used in commercial computer-aided engineering tools. Tow-steered composites are modeled through a design framework wherein tow paths are parameterized in a general way and projected onto a finite element mesh, and MSG calculates the local shell/plate properties. The result is a complete workflow from design parameter input to structural performance evaluation. An open-source optimization software package is used to enable constrained optimization of structural stiffness for the broad tow-steered composite design space. Numerical examples are provided to demonstrate the capabilities of this tool and the promise and potential of tow-steered designs that optimize structural performance while satisfying manufacturing constraints.

Su Tian↗
NASA NTRSDate not supplied

An Integrated Design Tool for Tow-Steered Laminates of Composites in Abaqus and MSC.Patran/Nastran

Tow-steered composites can be tailored for optimal mechanical performance of lightweight structures. However, there are no commercial-grade design tools for tow-steered composite structures, which hinders the design innovation of tow-steered composites in realistic structures. The novelty of this paper is to develop an integrated design framework along with the development of graphical user interface (GUI) plug-ins in commercial finite element (FE) software Abaqus and MSC.Patran/Nastran. The GUI plug-ins take all the design setups and communicate with external codes for the material modeling and optimization, and hence provide a unified design environment within the FE codes. The mechanics of structure genome (MSG) plate model computes shell element properties based on user-defined fiber paths and layup, which are defined via the GUI plug-ins. The optimization is performed by an open-source code, Dakota, from Sandia National Laboratories (Sandia), which also coordinates the structural analysis, material modeling, and optimization in design iterations. Two examples are presented to demonstrate the user-friendliness and versatility of the developed GUI plug-ins. The developed tools will ease the design process and facilitate the application of tow-steered composites in realistic aerospace structures.

Xin Liu↗
NASA NTRSDate not supplied

A Design Framework for Thick and Thin Tow-Steered Composites Using Mechanics of Structure Genome

The design of tow-steered composites is one of the most popular and promising topics under the class of variable stiffness structures. In this work, the authors propose a new design framework and tool for the optimization of tow-steered composites. Mechanics of structure genome (MSG) provides accurate computation of plate/shell section properties including thick and highly curved structures. The computed section properties can be directly used in commercial computer-aided engineering tools. Tow-steered composites are modeled through a design framework wherein tow paths are parameterized in a general way and projected onto a finite element mesh, and MSG calculates the local shell/plate properties. The result is a complete workflow from design parameter input to structural performance evaluation. An open-source optimization software package is used to enable constrained optimization of structural stiffness for the broad tow-steered composite design space. Numerical examples are provided to demonstrate the capabilities of this tool and the promise and potential of tow-steered designs that optimize structural performance while satisfying manufacturing constraints.

Su Tian↗
NASA NTRSDate not supplied

Critical Progressive Damage Analysis Model Features for Low-Velocity Impact on Thermoset and Thermoplastic Panels

A previous verification and validation framework evaluated the ability of various progressive damage analysis (PDA) tools to predict the mechanical response and damage state in post-buckled stiffened aerospace structures composed of fiber-reinforced thermoset composite materials. Herein, the ability of PDA tools to predict damage in thermoplastic composite materials subject to low-velocity impact (LVI) loading has been assessed. LVI tests and analyses have been conducted for similar panels, comprising thermoset or thermoplastic composite materials. Preliminary test/analysis correlations revealed that using the same combination of PDA model features and finite element model-building guidelines for the thermoset and thermoplastic LVI specimens resulted in underprediction of matrix crack lengths and delaminated area in the thermoplastic analyses despite yielding good correlations for the thermoset specimens. In this paper, the quality of the test/analysis correlations for analyses of thermoplastic LVI specimens performed with different combinations of PDA model features using the NASA CompDam material model are presented. Model features that were assessed in terms of effect on the quality of the test/analysis correlation include the representation of damageable interfaces, residual thermal stresses, and fiber damage.

Frank Leone↗
NASA NTRSDate not supplied

Critical Progressive Damage Analysis Model Features for Low-Velocity Impact on Thermoset and Thermoplastic Panels

A previous verification and validation framework evaluated the ability of various progressive damage analysis (PDA) tools to predict the mechanical response and damage state in post-buckled stiffened aerospace structures composed of fiber-reinforced thermoset composite materials. Herein, the ability of PDA tools to predict damage in thermoplastic composite materials subject to low-velocity impact (LVI) loading has been assessed. LVI tests and analyses have been conducted for similar panels, comprising thermoset or thermoplastic composite materials. Preliminary test/analysis correlations revealed that using the same combination of PDA model features and finite element model-building guidelines for the thermoset and thermoplastic LVI specimens resulted in underprediction of matrix crack lengths and delaminated area in the thermoplastic analyses despite yielding good correlations for the thermoset specimens. In this paper, the quality of the test/analysis correlations for analyses of thermoplastic LVI specimens performed with different combinations of PDA model features using the NASA CompDam material model are presented. Model features that were assessed in terms of effect on the quality of the test/analysis correlation include the representation of damageable interfaces, residual thermal stresses, and fiber damage.

Frank Leone↗
NASA NTRSDate not supplied

Low-Velocity Impact Analyses of Composite Panels Using Cohesive Zone Modeling and Continuum Damage Mechanics

A parametric study was conducted to gage the sensitivity of simulations of low-velocity impacts on laminated composite panels to various finite element model and material model features. The material model used in this parametric study was previously verified and validated for conducting progressive damage analyses of post-buckled composite structures subjected to quasi-static loading conditions. Based on the results of this parametric study, updates have been made to a progressive damage analysis material model and the best practices for its application. Experimental results are compared to computational results obtained with and without the updates to the models. Both thermoset and thermoplastic fiber-reinforced materials are considered. The resulting enhancements to the material model are presented in detail.

Frank Leone↗
NASA NTRSDate not supplied

Characterization of Low-Velocity Impact Damage in Toughened Non-Crimp Fabric Laminates

The damage response of resin-infused composites was investigated using quasi-static indentation (QSI) and instrumented drop-weight impact testing. The test specimens were composed of six layers of non-crimp fabrics where each layer contained +45°, 90°, −45°, and 0° plies. The goals of the testing were to identify damage responses that may differ from traditional thermoset materials and provide damage characterization data to evaluate current damage prediction analyses and aid improvements to current damage models. The damage was characterized using X-ray computed tomography (CT) and ultrasonic testing (UT). Incremental QSI loading was used on a single specimen to investigate damage growth in nine steps at progressively higher loads. Realtime acoustic emission data were used to determine the unloading points. Unlike typical thermoset composites, the force-displacement was smooth and showed no obvious indications of damage. The primary damage consisted of large lines of fiber fracture on the plies near the impact surface and delaminations through the thickness. Nine specimens were impacted at nominal impact energies of 25 ft-lbs, 30 ft-lbs, and 35 ft-lbs. The force histories at each energy followed nearly identical paths. Again, no obvious signs of damage were observed in any of the force histories. The general damage response in the dynamic tests was similar to the QSI-loaded specimens. However, repeat specimens impacted with a given impact energy showed variations in the damage. Some characteristics of the damage response were different than those typically observed in thermoset composites and will need to be evaluated using current analysis methods.

Composite Materials↗