Search NASA⌕ Search

Engineering topics

Fred G Rose

Publications and source records attributed to Fred G Rose.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Cloud Macrophysical Changes Observed by MODIS, CALIPSO, and CloudSat for the 11-year Period

Using the Moderate Resolution Imaging Spectroradiometer (MODIS), Cloud–Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO), and CloudSatsatellitemeasurements, cloud macrophysicalchanges are examined from 2007 to 2017(Ham et al., 2021). Particularly, we compare cloud changes derived from MODIS passive sensor and CALIPSO-CloudSat (CALCS) combined active sensor measurements. Both MODIS and CALCS well capture general features of the cloud changes related to El Niño–Southern Oscillation (ENSO) events. However, because of better detections of thin cirrus clouds, CALCS cloud volume anomalies are better correlated with relative humidity anomalies, compared to MODIS. In addition, MODIS observations show a stronger anticorrelation between low and mid/high cloud volume anomalies, compared to CALCS, mainly due to limitations in detecting overlapping clouds by MODIS passive sensor.In addition, the geometrical thickness of MODIS mid/high clouds is thinner than that from CALCS, less affecting cloud amounts at 0-3 km altitude.

Cloud↗
NASA NTRSDate not supplied

Shortwave Broadband Irradiance Computations Using Cloud Properties Combined from CALIPSO, CloudSat, and MODIS

In this study, cloud properties measured from the CALIPSO, CloudSat, and MODIS (CCM) are used for top-of-atmosphere (TOA) shortwave (SW) broadband (BB) irradiance computations. The CALIPSO and CloudSat active sensors provide detailed cloud vertical profiles, but these occasionally miss parts of the cloud columns due to the full attenuation of sensor signals, surface clutter, or insensitivity to a certain range of cloud particle sizes. As a result, the CCM-merged cloud extinction coefficient profiles can be underestimated. Therefore, we compare the column-integrated visible scaled cloud optical depth (VSCOD) of the CCM-merged cloud extinction coefficient profile with the MODIS-estimated VSCOD and apply a scaling factor to the CCM-merged cloud extinction profile. The VSCOD is defined as a visible cloud optical depth multiplied by (1¬–asymmetry parameter). The SW irradiances are computed using the scaled CCM-merged cloud extinction coefficient and effective radius profiles. It is shown that the multi-sensor-combined cloud profiles significantly reduce positive TOA SW BB biases, compared to those with MODIS-derived cloud properties only. The improvement is more pronounced for optically thick clouds, where MODIS ice particle effective radius is largely underestimated.

Cloud↗
NASA NTRSDate not supplied

Different Features of Cloud Macrophysical Changes Observed by MODIS, CALIPSO, and CloudSat for the 11-Year Period

From the A-train satellite mission, more than 11 years of Cloud–Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO), and CloudSat satellite measurements are available from 2007 to 2017. In this study, we examine cloud macrophysical changes from a passive sensor, Moderate Resolution Imaging Spectroradiometer (MODIS), and two active sensors, CALIPSO and CloudSat (CALCS). MODIS and CALCS capture common features of the cloud changes related to El Niño–Southern Oscillation (ENSO) events, i.e., increase of low clouds during La Niña and increase of mid and high clouds during El Niño over the eastern Pacific. However, optically thin cirrus clouds are well detected by CALCS while these are often missed by MODIS. As a result, MODIS shows much flatter distributions of cloud top heights. In addition, compared to MODIS, CALCS cloud volume anomalies are better correlated with relative humidity anomalies. The differences between MODIS and CALCS appear in low cloud variations. Particularly, fluctuations in MODIS low cloud anomalies are larger than CALCS, and MODIS low cloud anomalies are anticorrelated with mid/high cloud anomalies. This is because of the limitation in detecting underlying clouds by MODIS passive sensor. Also, the layer thickness of MODIS mid/high clouds is thinner than that from CALCS, less affecting cloud amounts at 0-3 km altitude.

Cloud↗
NASA NTRSDate not supplied

Comparison of Observed Longwave, Shortwave Irradiance and Surface Temperature from “MOSAiC” to CERES Radiative Transfer Calculations and Inputs

As atmospheric temperatures rise due to increased anthropogenic forcing, the effect is expected to be larger over the arctic than midlatitude and tropics, known as polar amplification. A multi-national program, the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) was ran between Sept 2019 and Oct 2020. The project deployed scientific instruments on board the German research vessel Polarstern with the ship remaining across a year to observe all aspects of polar climate. The US DOE deployed the ARM AMF2 aboard the ship along with several off-ship sites for extended spatial observations. Of particular importance was the measurement of the energetics of the ice/ocean/atmosphere interactions through observations of surface irradiance and surface temperatures. NASA’s Clouds and the Earth’s Radiant Energy System (CERES) project produces the SYN1deg Edition 4 data product. This product provides high quality, hourly, globally gridded and temporally complete maps of top of atmosphere (TOA), in atmosphere, and surface irradiances. TOA fluxes are derived from CERES instruments and geostationary satellites. In addition, TOA, in atmosphere, and surface irradiances are computed using the Langley Fu and Liou radiative transfer model. The radiative transfer model is run hourly at 1 degree ~equal area spatial resolution. Meteorological profiles are provided by Global Modeling and Assimilation Office’s GEOS-541 reanalysis product. Cloud properties are derived solely from Terra and Aqua MODIS imagers northward of 60°. Here we compare SYN1deg hourly calculations of surface irradiance to observations from the AMF2 to validate the products estimates of surface irradiance in this challenging area. Along with the irradiance comparisons we take a close look at the surface temperature record in the GEOS-541 product and compare it over both time and space to several surface observations provided by MOSAiC. Along with the comparison to the re-analysis record we will compare these observed surface temperatures to those derived from the AIRS product, which is known to have some difficulty in extreme high latitude areas. The goals of this study are 1) understand computed surface downward irradiance and temperature error separated by surface type (e.g. sea ice or open water) and by season, and 2) error covariance in spatial and temporal space. We seek to use this information to extrapolate the error from the MOSAiC domain to a larger arctic region.

David A Rutan↗
NASA NTRSDate not supplied

Regional Energy Budget Over Ocean Derived From Satellite Observations

The uncertainty in regional surface energy flux derived by summing all energy flux components is known to be large. In addition, quantifying the regional energy flux uncertainty considering all flux component uncertainties is very difficult. However, this approach is needed to understand regional energy flux components and how these components change with time. The CERES surface radiation budget data product, Edition 4.1 EBAF combined with reanalysis products was used to assess regional surface energy budget over ocean in earlier studies. The CERES team revised the data product and released Edition 4.2 EBAF product in February 2023. Prominent differences from the earlier edition are: 1) no geostationary satellite derived cloud properties are used for surface irradiance computations and 2) MERRA-2 provides temperature and humidity profiles. Combined with surface turbulent fluxes from various products, this study uses the revised EBAF surface irradiances and addresses regional energy budget over ocean. In addition, the uncertainty in regional surface radiation and energy budgets is discussed.

Seiji Kato↗
NASA NTRSDate not supplied

Earth Radiation Budget Climate Record Composed of Multiple Satellite Observations

Effects of cloud diurnal cycle on top-of-atmosphere (TOA) and surface regional monthly mean irradiances, climatological mean, and anomalies are analyzed using CERES derived TOA irradiances and surface irradiances computed with MODIS derived cloud properties. Cloud properties derived from Terra and Aqua MODIS are sufficient to capture cloud diurnal cycle to compute regional monthly mean surface irradiances. While missing cloud diurnal cycle leads to a biased TOA and surface regional irradiances for regions with a strong cloud diurnal cycle, monthly regional TOA and surface anomalies derived from one sun-synchronous orbit agrees well with those derived from two sun-synchronous orbits. Based on these results, the algorithm to produce Edition 4.2 CERES EBAF product is developed. Regional TOA and surface climatological means derived from one sun-synchronous orbit are adjusted to match corresponding climatological means derived from Terra+Aqua observations. This climatological adjustment approach is used to merge the Terra only period to the Terra+Aqua period and to extend the Terra and Aqua record by merging NOAA20 observations. Two additional differences of Edition 4.2 EBAF algorithm to compute surface irradiances compared to the earlier version are: 1) no geostationary satellite derived cloud properties are used and 2) temperature and humidity from MERRA-2 instead of GEOIS-5.4.1 are used. Once surface monthly regional mean irradiances are compared with surface observations, the agreement is equivalent to the agreement with the earlier version. However, because surface irradiances are not affected by geostationary satellite artifacts, regional surface irradiance anomaly time series is significantly improved, especially for longwave irradiances.

Seiji Kato↗