Search NASA⌕ Search

Engineering topics

Freund, Jonathan B.

Publications and source records attributed to Freund, Jonathan B..

At least 37 records · Page 2

Laser-induced non-equilibrium plasma kernel dynamics

A non-equilibrium model for laser generated plasmas is validated and used to investigate plasma kernel dynamics. Breakdowns in quiescent air at different ambient conditions (e.g. pressure) for different laser parameters (e.g. power density and beam wavelength) are considered. The hydrodynamics is described based on the chemically reactive Navier–Stokes equations where non-equilibrium effects are accounted for using a three-temperature model. Laser-plasma interactions over nano-second time-scales are modeled with a radiative transfer equation (RTE), including both multiphoton ionization (MPI) and inverse Bremsstrahlung (IB). Validation is conducted by comparing absorbed energy and plasma emission with the corresponding experimental measurements, and by observations of the structure of the breakdown. The laser generated plasma exhibits a two-lobe structure, developing both in the forward and backward directions. An analysis of the dynamics suggests that the kernel evolution results from a radiation-driven wave that is: (i) triggered by MPI, (ii) sustained by energy deposition in IB interactions, which compensates for the energy lost by free-electrons in ionizing collisions, and (iii) guided by both MPI and ionization by electron impact (IE).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Accounting for uncertainty in RCCE species selection

A framework is presented to quantify, based on Bayesian evidence, the relative plausibility of species se- lection options in rate-controlled constrained equilibrium (RCCE) reduced chemical models, accounting for uncertainty in the kinetic parameters and experimental data used to refine them. This approach bal- ances the joint goals of matching available data and avoiding overfitting, which is well-understood to limit extrapolative capacity for true prediction. The methodology is applied to homogeneous autoigni- tion, where predictions are known to be particularly sensitive to chemical model details, specially at low temperatures. It is first introduced for hydrogen–air autoignition using an established mechanism, then demonstrated in two applications of methane–air autoignition using the larger GRI-1.2 mechanism. This larger mechanism significantly increases the computational cost of model selection (though not of the subsequent application in predictions), which is alleviated with a time-scale-guided pre-sorting strategy. Uses and extensions of this new formulation are discussed.

08 HYDROGEN↗

Machine learning-assisted early ignition prediction in a complex flow

Machine learning methods are used to improve the efficiency by which turbulence-resolved simulations predict whether a hydrogen jet in air crossflow will successfully ignite. The flush-mounted jet issues perpendicularly from the wall of a low-speed wind tunnel into a turbulent boundary layer wherein a laser-induced optical breakdown (LIB) hotspot is deposited. A detailed hydrogen chemical mechanism is used to model the radicals and any subsequent chemical reactions. A dielectric-barrier discharge actuator generates body forces and hydrogen radicals near the jet orifice. Here we focus on the success or not of the ignition based on LIB location. A challenge is that definitive determination of this requires long simulations, up to 440 µs after the LIB deposition. This is particularly expensive since multiple simulations are required to find the threshold. To reduce the computational effort, three short-time (91 µs) criteria are proposed, evaluated, and compared: a constructed criterion based on detailed observations of radicals near the stoichiometric surface and two machine learning approaches, each trained on 38 realizations. The constructed criterion provides a low-cost estimate of the ignition boundary that is unambiguous in 45 of the 50 training and test trials, so only 10% of them would need to be simulated longer. The trained neural networks correctly predict outcomes in all cases evaluated, with the more automated procedure—a convolutional neural network (CNN) trained on two-dimensional images—providing the most definitive outcome prediction. From the CNN, a sensitivity analysis is used to determine which kernel features from the two-dimensional input data, as defined by intermediate-layer network weights, are important for identifying ignition.

42 ENGINEERING↗

Adaptive sparse polynomial dimensional decomposition for derivative-based sensitivity

In this report applications, such as the plasma-coupled combustion system we consider, derivative-based sensitivity indices (DSI) are known to have several advantages over Sobol's total sensitivity indices, especially for small sample sizes. Several properties of derivative-based sensitivity measures are leveraged to develop a new and efficient numerical approach to estimate them. It is based on computing the DSI measures by effectively cost-free Monte Carlo sampling of an adaptively constructed orthogonal polynomial surrogate with uncertain input parameters that can have arbitrary probability distributions. The adaptivity reduces the number of necessary model evaluations, which is demonstrated both in a constructed example (the Moon function) and in two plasma-combustion systems with up to 55 uncertain parameters. Unimportant parameters are successfully identified and neglected with a low number of model evaluations, which makes it an attractive non-intrusive approach when adjoint solutions are unavailable to provide sensitivity information.

42 ENGINEERING↗

An adaptive least-squares global sensitivity method and application to a plasma-coupled combustion prediction with parametric correlation

We introduce an efficient non-intrusive surrogate-based methodology for global sensitivity analysis and uncertainty quantification. Modified covariance-based sensitivity indices (mCov-SI) are defined for outputs that reflect correlated effects. The overall approach is applied to simulations of a complex plasma-coupled combustion system with disparate uncertain parameters in sub-models for chemical kinetics and a laser-induced breakdown ignition seed. The surrogate is based on an Analysis of Variance (ANOVA) expansion, such as widely used in statistics, with orthogonal polynomials representing the ANOVA subspaces and a polynomial dimensional decomposition (PDD) representing its multi-dimensional components. The coefficients of the PDD expansion are obtained using a least-squares regression, which both avoids the direct computation of high-dimensional integrals and affords an attractive flexibility in choosing sampling points. This facilitates importance sampling using a Bayesian calibrated posterior distribution, which is fast and thus particularly advantageous in common practical cases, such as our large-scale demonstration, for which the asymptotic convergence properties of polynomial expansions cannot be realized due to computation expense. Effort, instead, is focused on efficient finite-resolution sampling. Standard covariance-based sensitivity indices (Cov-SI) are employed to account for correlation of the uncertain parameters. Magnitude of Cov-SI is unfortunately unbounded, which can produce extremely large indices that limit their utility. Alternatively, mCov-SI are then proposed in order to bound this magnitude $\in$ [0, 1]. The polynomial expansion is coupled with an adaptive ANOVA strategy to provide an accurate surrogate as the union of several low-dimensional spaces, avoiding the typical computational cost of a high-dimensional expansion. It is also adaptively simplified according to the relative contribution of the different polynomials to the total variance. Finally, the approach is demonstrated for a laser-induced turbulent combustion simulation model, which includes parameters with correlated effects.

42 ENGINEERING↗

Actuator selection and placement for localized feedback flow control

The selection and placement of actuators and sensors to control compressible viscous flows is addressed by developing a novel methodology based upon the eigensystem structural sensitivity of the linearized evolution operator appropriate for linear feedback control. Forward and adjoint global modes are used to construct a space of possible perturbations to the linearized operator, which yields a small optimization problem for selecting the parameters that best achieve the control objective, including where they should be placed. The method is demonstrated by informing actuation to suppress amplification of the instabilities in boundary layer separation in a high-subsonic diffuser. Complete stabilization is observed in the separated shear layer for short downstream distances at modest Reynolds number. Higher Reynolds numbers and longer distances are expected to be more challenging to stabilize; here the control informed by the procedure still substantively suppresses amplification of instabilities. It is also demonstrated that more complex actuator–sensor selections may not yield superior controllers.

Mechanics↗

Adjoint-based sensitivity analysis of localized ignition in a non-premixed hydrogen-air mixing layer

A space-time discrete-adjoint method recently developed for high-fidelity compressible turbulence simulations is extended to chemically-reacting mixtures for the purpose of measuring sensitivity of localized ignition in a non-premixed hydrogen-air mixing layer. The ignition source is modeled as a source in the energy equation, which introduces several parameters that need to be chosen with care. Because ignition is inherently discontinuous in parameter space (i.e., it succeeds or fails after some period), the resulting gradients in modeling parameters are ill-defined near its threshold. To this end, a cost functional is designed to provide short-time sensitivity in concert with an indicator function that informs whether or not successful ignition has occurred. The corresponding sensitivity is used in a line-search algorithm to identify a point on the ignition boundary in high-dimensional parameter space (7 dimensional in our 7-parameter demonstration). This is used to quantify the relative importance of parameters on ignition.

Capecelatro, Jesse↗

A practical discrete-adjoint method for high-fidelity compressible turbulence simulations

Methods and computing hardware advances have enabled accurate predictions of complex compressible turbulence phenomena, such as the generation of jet noise that motivates the present effort. However, limited understanding of underlying physical mechanisms restricts the utility of such predictions since they do not, by themselves, indicate a route to design improvements. Gradient-based optimization using adjoints can circumvent the flow complexity to guide designs, though this is predicated on the availability of a sufficiently accurate solution of the forward and adjoint systems. These are challenging to obtain, since both the chaotic character of the turbulence and the typical use of discretizations near their resolution limits in order to efficiently represent its smaller scales will amplify any approximation errors made in the adjoint formulation. Formulating a practical exact adjoint that avoids such errors is especially challenging if it is to be compatible with state-of-the-art simulation methods used for the turbulent flow itself. Automatic differentiation (AD) can provide code to calculate a nominally exact adjoint, but existing general-purpose AD codes are inefficient to the point of being prohibitive for large-scale turbulence simulations. Here, we analyze the compressible flow equations as discretized using the same high-order workhorse methods used for many high-fidelity compressible turbulence simulations, and formulate a practical space–time discrete-adjoint method without changing the basic discretization. A key step is the definition of a particular discrete analog of the continuous norm that defines our cost functional; our selection leads directly to an efficient Runge–Kutta-like scheme, though it would be just first-order accurate if used outside the adjoint formulation for time integration, with finite-difference spatial operators for the adjoint system. Its computational cost only modestly exceeds that of the flow equations. We confirm that its accuracy is limited by computing precision, and we demonstrate it on the aeroacoustic control of a mixing layer with a challengingly broad range of turbulence scales. For comparison, the error from a corresponding discretization of the continuous-adjoint equations is quantified to potentially explain its limited success in past efforts to control jet noise. The differences are illuminating: the continuous-adjoint is shown to suffer from exponential error growth in (reverse) time even for the best-resolved largest turbulence scales. Implications for jet noise reduction and turbulence control in general are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mechanisms of material removal and mass transport in focused ion beam nanopore formation

Despite the widespread use of focused ion beam (FIB) processing as a material removal method for applications ranging from electron microscope sample preparation to nanopore processing for DNA sequencing, the basic material removal mechanisms of FIB processing are not well understood. We present the first complete atomistic simulation of high-flux FIB using large-scale parallel molecular dynamics (MD) simulations of nanopore fabrication in freestanding thin films. We focus on the root mechanisms of material removal and rearrangement and describe the role of explosive boiling in forming nanopores. FIB nanopore fabrication is typically understood to occur via sputter erosion. This can be shown to be the case in low flux systems, where individual ion impacts are sufficiently separated in time that they may be considered as independent events. But our detailed MD simulations show that in high flux FIB processing, above a threshold level at which thermal effects become significant, the primary mechanism of material removal changes to a significantly accelerated, thermally dominated process. Under these conditions, the target is heated by the ion beam faster than heat is conducted away by the material, leading quickly to melting, and then continued heating to nearly the material critical temperature. This leads to explosive boiling of the target material with spontaneous bubble formation and coalescence. Mass is rapidly rearranged at the atomistic scale, and material removal occurs orders of magnitude faster than would occur by simple sputtering. While the phenomenology is demonstrated computationally in silicon, it can be expected to occur at lower beam fluxes in other cases where thermal conduction is suppressed due to material properties, geometry, or ambient thermal conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗