Search NASA⌕ Search

Engineering topics

Frickland, P. O.

Publications and source records attributed to Frickland, P. O..

9 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Effects of Radiation on Capacitor Dielectrics

Data gathered on key design parameters. Report discusses study of electrical and mechanical properties of irradiated polymer dielectric materials. Data compiled for use by designers of high-energy-density capacitors that operate in presence of ionizing radiation. Study focused on polycarbonates, polyetheretherketones, polymethylpentenes, polyimides (including polyetherimide), polyolefins, polysulfones (including polyethersulfone and polyphenylsulfone), and polyvinylidene fluorides.

Bouquet, F. L.↗
NASA NTRS1985

Bonding Technique for Stiffened-Skin Structures

Consistent bond thickness achieved even in large, complicated parts. Spring Clamp positions and holds parts assembled on tooling plate. Stiffener and backing bar held against adhesive layer by clamp. Spring action of clamp keeps steady force on pieces as they cure, insuring consistent bond thickness.

Frickland, P. O.↗
NASA NTRS1984

Airlock Entry

Proposed airlock retrofitted to air-inflated polymeric domes to accommodate large vehicles. Airlock inexpensive, simple to assemble, adaptable to any terrain and any size required, and requires no external power.

Frickland, P. O.↗
NASA NTRS1983

Freeze/Thaw Properties of Cellular Glass

Without moisture, temperature cycles do no harm. Experiments described in new report indicate inherent material variability greater deterrent to application of material than freeze/thaw effects.

Frickland, P. O.↗
NASA NTRS1983

FSA field test report, 1980 - 1982

Photovoltaic modules made of new and developing materials were tested in a continuing study of weatherability, compatibility, and corrosion protection. Over a two-year period, 365 two-cell submodules have been exposed for various intervals at three outdoor sites in Southern California or subjected to laboratory acceptance tests. Results to date show little loss of maximum power output, except in two types of modules. In the first of these, failure is due to cell fracture from the stresses that arise as water is regained from the surrounding air by a hardboard substrate, which shrank as it dried during its encapsulation in plastic film at 150 C in vacuo. In the second, the glass superstrate is sensitive to cracking, which also damages the cells electrostatically bonded to it; inadequate bonding of interconnects to the cells is also a problem in these modules. In a third type of module, a polyurethane pottant has begun to yellow, though as yet without significant effect on maximum power output.

Maxwell, H. G.↗
NASA NTRS1983

Cleaner for Solar-Collector Covers

Simple self-contained cleaning system proposed for solar collectors or solar-collector protective domes. Perforated transparent plastic cap attached to top of protective dome in heliostat solar-energy collection system distributes cleaning fluid over surface of dome without blocking significant fraction of solar radiation.

Frickland, P. O.↗
NASA NTRS1982

Pressurized Paraboloidal Solar Concentrator

Pressurized paraboloidal solar concentrator has high concentration ratio and is easy to maintain. Gas pressure forces reflecting film into contact with paraboloidal substrate. Reflective surface, which is low-cost metalized polymer film, can be quickly and easily replaced making new design less expensive to produce.

Cleland, E. L.↗
NASA NTRS1982

Experimental evaluation of the Battelle accelerated test design for the solar array at Mead, Nebraska

A previously developed test design for accelerated aging of photovoltaic modules was experimentally evaluated. The studies included a review of relevant field experience, environmental chamber cycling of full size modules, and electrical and physical evaluation of the effects of accelerated aging during and after the tests. The test results indicated that thermally induced fatigue of the interconnects was the primary mode of module failure as measured by normalized power output. No chemical change in the silicone encapsulant was detectable after 360 test cycles.

Frickland, P. O.↗