Engineering topics

Friedmann, P.

Publications and source records attributed to Friedmann, P..

At least 19 records

NASA NTRS1994

A fundamental aeroservoelastic study combining unsteady CFD with adaptive control

This paper describes a two-dimensional aeroservoelastic study in the time domain. The model, which is based on exact inviscid aerodynamics, correctly represents the large amplitude motions and the associated strong shock dynamics in the transonic regime. The aeroservoelastic system consists of a two degree-of-freedom airfoil with a trailing edge control surface. Using first-order actuator dynamics, a digital adaptive controller is applied to provide active flutter suppression. Comparisons between time-responses of the open-loop and closed loop systems show the ability of the trailing edge control surface to suppress non-linear transonic aeroelastic phenomena. A relation between actuator dynamics, sampling time-step and limits on the flap deflection angle to guarantee the effectiveness of the adaptive controller was demonstrated by the results generated.

Friedmann, P.↗

NASA NTRS1993

Hypersonic flutter of a curved shallow panel with aerodynamic heating

The general equations describing the nonlinear fluttering oscillations of shallow, curved, heated orthotropic panels have been derived. The formulation takes into account the location of the panel on the surface of a generic hypersonic vehicle, when calculating the aerodynamic loads. It is also shown that third order piston theory produces unsteady aerodynamic loading which is in close agreement with that based upon direct solution of the Euler equations. Results, for simply supported panels, are obtained using Galerkin's method combined with direct numerical integration in time to compute stable limit cycle amplitudes. These results illustrate the sensitivity of the aeroelastic behavior to the unsteady aerodynamic assumptions, temperature, orthotropicity and flow orientation.

Bein, T.↗

NASA NTRS1985

Application of modern structural optimization to vibration reduction in rotorcraft

This paper explores a number of techniques which are capable of reducing vibration levels in rotorcraft by redistributing the mass and stiffness properties of the structure. First, vibration reduction in the rotor is considered by using formal structural optimization for ensuring optimal frequency placement. Two cases are considered: in the first case aeroelastic constraints are not enforced and the blade is designed for minimum weight; in the second case aeroelastic constraints are enforced and vibration levels are minimized in forward flight. Next, vibration reduction in the fuselage is considered and the various methods available for vibration reduction by local structural modification are reviewed. The feasibility of combining local structural modification with modern structural optimization is discussed and some extensions of previous research are suggested.

Friedmann, P.↗

NASA NTRS1979

The nonlinear behavior of elastic slender straight beams undergoing small strains and moderate rotations

The nonlinear behavior of slender and initially straight beams is investigated. A set of equilibrium equations for a beam undergoing moderate rotations and small strains is derived. The derivation includes several assumptions which are clearly stated and explained. These equations are used to investigate the deformations of a cantilevered beam which is loaded by a concentrated transverse load at the free end. The numerical results are in very good agreement with the experimental results.

Rosen, A.↗

NASA NTRS1979

Formulation of the aeroelastic stability and response problem of coupled rotor/support systems

The consistent formulation of the governing nonlinear equations of motion for a coupled rotor/support system is presented. Rotor/support coupling is clearly documented by enforcing dynamic equilibrium between the rotor and the moving flexible support. The nonlinear periodic coefficient equations of motion are applicable to both coupled rotor/fuselage aeroelastic problems of helicopters in hover or forward flight and coupled rotor/tower dynamics of a large horizontal axis wind turbine (HAWT). Finally, the equations of motion are used to study the influence of flexible supports and nonlinear terms on rotor aeroelastic stability and response of a large two-bladed HAWT.

Warmbrodt, W.↗

NASA NTRS1979

Formulation of coupled rotor/fuselage equations of motion

The governing equations of motion of a helicopter rotor coupled to a rigid body fuselage are derived. A consistent formulation is used to derive nonlinear periodic coefficient equations of motion which can be used to study coupled rotor/fuselage dynamics in forward flight. The methodology of rotor/fuselage coupling is clearly described and the importance of an ordering scheme in deriving consistent nonlinear equations of motion is reviewed. The final equations which are presented in partial differential form can be used to model coupled rotor/fuselage aeroelastic response or stability problems.

Warmbrodt, W.↗

NASA NTRS1978

Application of the finite element method to rotary-wing aeroelasticity

Recent research in rotary-wing aeroelasticity has indicated that all fundamental problems in this area are inherently nonlinear. The non-linearities in this problem are due to the inclusion of finite slopes, due to moderate deflections, in the structural, inertia and aerodynamic operators associated with this aeroelastic problem. In this paper the equations of motion, which are both time and space dependent, for the aeroelastic problem are first formulated in P.D.E. form. Next the equations are linearized about a suitable equilibrium position. The spatial dependence in these equations is discretized using a local Galerkin method of weighted residuals resulting in a finite element formulation of the aeroelastic problem. As an illustration the method is applied to the coupled flap-lag problem of a helicopter rotor blade in hover. Comparison of the solutions with previously published solutions establishes the convergence properties of the method. It is concluded that this formulation is a practical tool for solving rotary-wing aeroelastic stability or response problems.

Friedmann, P.↗

NASA NTRS1977

Aeroelastic stability of complete rotors with application to a teetering rotor in forward flight

The derivation of a set of non-linear coupled flap-lag-torsion equations of motion for moderately large deflections of an elastic, two-bladed teetering helicopter rotor in forward flight is concisely outlined. The following degrees of freedom are included in the mathematical model: rigid body flapping, rigid body lead-lag, elastic bending in flap and lead-lag, blade root torsion, and shaft torsion. Quasi-steady aerodynamic loads are considered and the effects of reversed flow are included. The aeroelastic stability of the complete rotor is investigated by using a linearized system of equations of motion. The equilibrium position about which the equations are linearized is obtained by considering the trim state of the helicopter, in true or simulated forward flight conditions. The sensitivity of the aeroelastic stability boundaries to interblade structural and mechanical coupling is illustrated by comparing the complete rotor stability boundaries with those obtained from a single blade analysis for a number of hover and forward flight cases.

Shamie, J.↗

NASA NTRS1977

Aeroelastic stability of coupled flap-lag-torsional motion of helicopter rotor blades in forward flight

A set of coupled periodic nonlinear differential flap-lag-torsional equations of blade motion is described which can simulate a blade having a precone, twist, distributed torsion, root torsion, torque offset, blade-root offsets, and offsets among the elastic axis, the aerodynamic center, and the blade cross-sectional center of mass. It is noted that the aerodynamic loads derived for these equations are applicable to cases of both hover and forward flight. The aeroelastic stability of a hingeless helicopter blade is investigated by linearizing the nonlinear differential equations of motion about a time-dependent equilibrium position of the helicopter in forward flight, using propulsion and moment trim procedures. A comparison of the results with those obtained previously for coupled flap-lag-torsional boundaries in hover indicates that aeroelastic-stability margins are degraded due to forward flight.

Friedmann, P.↗

NASA NTRS1977

Efficient numerical treatment of periodic systems with application to stability problems

Two efficient numerical methods for dealing with the stability of linear periodic systems are presented. Both methods combine the use of multivariable Floquet-Liapunov theory with an efficient numerical scheme for computing the transition matrix at the end of one period. The numerical properties of these methods are illustrated by applying them to the simple parametric excitation problem of a fixed end column. The practical value of these methods is shown by applying them to some helicopter rotor blade aeroelastic and structural dynamics problems. It is concluded that these methods are numerically efficient, general and practical for dealing with the stability of large periodic systems.

Friedmann, P.↗

NASA NTRS1976

Recent developments in rotary-wing aeroelasticity

The purpose of this review is to present the research done in rotary-wing aeroelasticity during the past eight years in a unified manner. The following topics are reviewed with considerable detail: (1) recent development in the aeroelastic modeling of the coupled flap-lag-torsional problem in hover (2) effect of unsteady aerodynamics on the coupled flap-lag-torsional aeroelastic problem in hover (3) the coupled flap-lag and the coupled flap-lag-torsional problem in forward flight (4) complete rotor and coupled rotor fuselage aeroelastic problems including both hingeless and teetering rotors.

Friedmann, P.↗

NASA NTRS1976

Effect of modified aerodynamic strip theories on rotor blade aeroelastic stability

Various existing unsteady aerodynamic strip theories which have been developed in the past for both fixed and rotary wing aeroelastic analyses are modified in the paper so as to make them applicable to the coupled flap-lag-torsional aeroelastic problem of a rotor blade in hover. These corrections are primarily due to constant angle of attack, constant inflow and variable free stream velocity due to lead-lag motion. Next, the modified strip theories are incorporated in a coupled flap-lag-torsional aeroelastic analysis of the rotor blade in hover and the sensitivity of the aeroelastic stability boundaries to the aerodynamic assumptions is examined.

Friedmann, P.↗

NASA NTRS1976

Aeroelastic stability of complete rotors with application to a teetering rotor in forward flight

The derivation of a set of nonlinear coupled flap-lag-torsion equations of motion for moderately large deflections of an elastic, two bladed teetering helicopter rotor in forward flight is concisely outlined. The following degrees of freedom are included in the mathematical model: rigid body flapping, rigid body lead lag, elastic bending in flap and lead-lag blade root torsion and shaft torsion. Quasi-steady aerodynamic loads are considered and the effects of reversed flow are included. The aeroelastic stability of the complete rotor is investigated using a linearized system of equations of motion. The equilibrium position about which the equations are linearized is obtained by considering the trim state of the helicopter, in true or simulated forward flight conditions. The sensitivity of the aeroelastic stability boundaries to interblade structural and mechanical coupling is illustrated by comparing the complete rotor stability boundaries with those obtained from a single blade analysis for a number of hover and forward flight cases.

Shamie, J.↗

NASA NTRS1975

Aeroelastic stability of trimmed helicopter blades in forward flight

Equations for moderately large amplitude coupled flap-lag motion of a torsionally rigid hingeless elastic helicopter blade in forward flight are derived. Quasi-steady aerodynamic loads are considered and the effects of reversed flow are included. By using Galerkin's method the spatial dependence of the problem is eliminated and the equations are linearized about a time dependent equilibrium position determined from the trimmed equilibrium position of the rotor in forward flight. In the first trim procedure the rotor is maintained at a fixed value of thrust coefficient with forward flight and horizontal and vertical force equilibrium is satisfied in addition to maintaining zero pitch and roll moments. The second trim procedure maintains only zero pitch and roll moment simulating conditions under which a rotor would be tested in the wind tunnel.

Friedmann, P.↗

NASA NTRS1975

Influence of structural damping, preconing offsets and large deflection on the flap-lag-torsional stability of a cantilevered rotor blade

A set of equations describing the coupled flap-lag-torsional dynamics of a cantilevered rotor blade in hover is presented. This set of equations is used to evaluate the influence of structural damping, preconing and offsets on the linearized aeroelastic stability of some representative blade configurations. A number of examples illustrating the coupled nonlinear flap-lag-torsional response are considered.

Friedmann, P.↗

NASA NTRS1974

Aeroelastic stability of periodic systems with application to rotor blade flutter

The dynamics of a helicopter blade in forward flight are described by a system of linear differential equations with periodic coefficients. The stability of this periodic aeroelastic system is determined, using multivariable Floquet-Liapunov theory. The transition matrix at the end of the period is evaluated by: (1) direct numerical integration, and (2) a new, approximate method, which consists in approximating a periodic function by a series of step functions. The numerical accuracy and efficiency of the methods is compared, and the second method is shown to be superior by far. Results illustrating the effect of the periodic coefficients and various blade parameters are presented.

Friedmann, P.↗

NASA NTRS1974

Aeroelastic stability of coupled flap-lag motion of hingeless helicopter blades at arbitrary advance ratios

Equations for large amplitude coupled flap-lag motion of a hingeless elastic helicopter blade in forward flight are derived. Only a torsionally rigid blade excited by quasi-steady aerodynamic loads is considered. The effects of reversed flow together with some new terms due to radial flow are included. Using Galerkin's method the spatial dependence is eliminated and the equations are linearized about a suitable equilibrium position. The resulting system of homogeneous periodic equations is solved using multivariable Floquet-Liapunov theory, and the transition matrix at the end of the period is evaluated by two separate methods. Computational efficiency of the two numerical methods is compared. Results illustrating the effects of forward flight and various important blade parameters on the stability boundaries are presented.

Friedmann, P.↗

NASA NTRS1973

Some conclusions regarding the aeroelastic stability of hingeless helicopter blades in hover and in forward flight

In this paper results and conclusions obtained from the study of the aeroelastic instability of hingeless helicopter blades are presented. First, the large amplitude coupled flap-lag equations of motion of a hingeless elastic helicopter blade are solved using an asymptotic expansion procedure in multiple time scales. Both hover and forward flight cases are considered. Stability boundaries and amplitudes of nonlinear response are obtained. From these, the importance of the nonlinear coupling and the effect of the periodic coefficients is determined. Next, using a system of linearized coupled flap-lag-pitch equations in hover, various divergence mechanisms for hingeless blades are shown. Finally, the flutter boundaries for coupled flap-lag-pitch are obtained. The effect of the torsional degree of freedom on the flap-lag type of instability is investigated. Similarly the effect of lag on the flap-pitch type of instability is considered. In addition, the effect of various blade parameters on the stability boundaries is shown.

Friedmann, P.↗