Engineering topics
Friend, Cynthia M.
Publications and source records attributed to Friend, Cynthia M..
A Priori Design of Dual-Atom Alloy Sites and Experimental Demonstration of Ethanol Dehydrogenation and Dehydration on PtCrAg
Not Available
Boosting the H 2 –D 2 Exchange Activity of Dilute Nanoporous Ti–Cu Catalysts through Oxidation–Reduction Cycle–Induced Restructuring
The use of nanoporous metals as catalysts has attracted significant interest in recent years. Their high-curvature, nanoscale ligaments provide not only high surface area but also a high density of undercoordinated step edge and kink sites. However, their long-term stability, especially at higher temperatures, is often limited by thermal coarsening and the associated loss of surface area. Herein, it is demonstrated that the nanoscale morphology of nanoporous Cu can be regenerated by applying oxidation/reduction cycles at 250 °C. Specifically, the morphological evolution and H 2 dissociation activity of hierarchical nanoporous Cu catalysts doped with Ti during structural rearrangement triggered by oxidative and reductive atmospheres at elevated temperatures are studied. In addition to coarsening of the structure at elevated temperatures, oxidation at 400 °C causes an expansion of the ligaments. Further, subsequent reduction at 400 °C leads to the formation of particles and a drop in the H 2 dissociation activity compared the fresh catalyst. However, performing the redox cycle at 250 °C reverses coarsening and boosts the H 2 dissociation activity for the hydrogen–deuterium (H 2 –D 2 ) reaction. Herein, the possibility to reverse coarsening is demonstrated, thereby mitigating the loss of activity frequently observed in nanoporous catalysts.
Hydrogen Dissociation Controls 1-Hexyne Selective Hydrogenation on Dilute Pd-in-Au Catalysts
Increasing the selectivity of the catalytic hydrogenation of alkynes to alkenes is of major importance for the processing of petrochemicals and the production of fine chemicals. Achieving high selectivity for alkene formation at high conversions, however, remains a long-standing challenge in heterogeneous catalysis. Here, the mechanism and origin of the high selectivity of dilute Pd-in-Au catalysts has been studied by a combination of first-principles calculations, microkinetic simulations, and isotopic exchange hydrogenation experiments using Pd 0.04 Au 0.96 nanoparticles embedded in raspberry colloid-templated silica. The Pd is predominantly in the form of isolated atoms, only surrounded by Au atoms, based on prior studies. The simulations indicate that the rate-limiting process for 1-hexyne hydrogenation on Pd monomers in Au(111) is H 2 dissociation, which has a large free energy barrier of 0.86 eV at 363 K and 0.2 bar of H 2 . The C–H bond formation steps, on the other hand, proceed with lower barriers, which contrasts with previous studies of extended Pd catalysts. The microkinetic simulations identify the sizable H 2 dissociation barrier and the small barrier for the hydrogenation of 1-hexyne as key factors that lead to a high selectivity for the production of 1-hexene from 1-hexyne, even at high conversion. The unconventional H 2 dissociation limiting process in combination with the low coverage of weakly bound hydrocarbon intermediates explains the near-zero order of 1-hexyne found experimentally. Furthermore, the partial hydrogenation of 1-hexyne to form 1-hexene is shown to be an irreversible process from our isotopic exchange hydrogenation experiments and is explained by the strongly exothermic nature of the reaction. Diluting active species, like Pd, in a less active host metal, like Au, hence appears promising as a means of tuning the binding energy of reactants and altering reaction profiles, leading to distinct kinetic behavior for an optimal catalytic activity and selectivity. Furthermore, the combination of microkinetic modeling, density functional theory calculations, and isotopic exchange experiments is thus demonstrated to be an effective approach to modeling important catalytic phenomena.
Unraveling 1-Hexene Hydrogenation over Dilute Pd-in-Au Alloys
Dilute Pd-in-Au alloys are valuable materials for selectively hydrogenating alkynes and isomerizing alkenes. By diluting Pd in a Au host, the selectivity toward semihydrogenated alkene isomers can be significantly enhanced and the unfavorable overhydrogenation to alkanes is suppressed. However, a detailed mechanistic study on the origin of the enhanced alkene selectivity over dilute alloy catalysts is still missing. Here, we combine experiment and theory to unravel the reaction mechanism, identifying rate-limiting and selectivity-controlling steps in 1-hexene hydrogenation over dilute Pd-in-Au catalysts. Using isotope-exchange hydrogenation experiments, we show that 1-hexene and hydrogen over a bimetallic Pd4Au96 in silica catalyst preferentially form 1-hexene isomers, (trans and cis) 2- and 3-hexene and only a small amounts of hexane. The reaction is consistent with a Horiuti–Polanyi mechanism, similar to a monometallic Pd nanoparticle catalyst. Computation of the free-energy profiles for 1-hexene hydrogenation and isomerization over a single Pd atom in a Au surface using first principles calculations indicated that the isomerization of 1-hexene to 2-hexene is energetically favorable due to the relatively large barrier for H2 dissociation preventing hydrogenation to n-hexane. Microkinetic modeling established that H2 dissociation on the single-atom Pd sites and H spillover from these sites onto the Au host are rate-limiting and key in steering the selectivity of dilute Pd-in-Au alloys toward the hexene isomers. Furthermore, the mechanistic insights from this study contribute to the rational design of optimized dilute alloy catalysts for selective alkene isomerization.
Facilitating Hydrogen Dissociation over Dilute Nanoporous Ti–Cu Catalysts
The dissociation of H 2 is an essential elementary step in many industrial chemical transformations, typically requiring precious metals. Here, we report a hierarchical nanoporous Cu catalyst doped with small amounts of Ti (npTiCu) that increases the rate of H 2 –D 2 exchange by approximately one order of magnitude compared to the undoped nanoporous Cu (npCu) catalyst. The promotional effect of Ti was measured via steady-state H 2 –D 2 exchange reaction experiments under atmospheric pressure flow conditions in the temperature range of 300–573 K. Pretreatment with flowing H 2 is required for stable catalytic performance, and two temperatures, 523 and 673 K, were investigated. The experimentally determined H 2 –D 2 exchange rate is 5–7 times greater for npTiCu vs the undoped Cu material under optimized pretreatment and reaction temperatures. The H 2 pretreatment leads to full reduction of Cu oxide and partial reduction of surface Ti oxide species present in the as-prepared catalyst as demonstrated using in situ ambient pressure X-ray photoelectron spectroscopy and X-ray absorption spectroscopy. The apparent activation energies and pre-exponential factors measured for H 2 –D 2 exchange are substantially different for Ti-doped vs undoped npCu catalysts. Density functional theory calculations suggest that isolated, metallic Ti atoms on the surface of the Cu host can act as the active surface sites for hydrogen recombination. Furthermore, the increase in the rate of exchange above that of pure Cu is caused primarily by a shift in the rate-determining step from dissociative adsorption on Cu to H/D atom recombination on Ti-doped Cu, with the corresponding decrease in activation entropy that it produces.
Replication Data for: Toward benchmarking theoretical computations of elementary rate constants on catalytic surfaces: formate decomposition on Au and Cu
The data underlying this published work have been made publicly available in this repository as part of the IMASC Data Management Plan. This work was supported as part of the Integrated Mesoscale Architectures for Sustainable Catalysis (IMASC), an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences under Award # DE-SC0012573.
Replication Data for: On the Origin of Sinter-Resistance and Catalyst Accessibility in Raspberry-Colloid-Templated Catalyst Design
The data underlying this published work have been made publicly available in this repository as part of the IMASC Data Management Plan. This work was supported as part of the Integrated Mesoscale Architectures for Sustainable Catalysis (IMASC), an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences under Award # DE-SC0012573.
Replication Data for: Exploiting the Liquid Phase to Enhance the Cross-Coupling of Alcohols over Nanoporous Gold Catalysts
The data underlying this published work have been made publicly available in this repository as part of the IMASC Data Management Plan. This work was supported as part of the Integrated Mesoscale Architectures for Sustainable Catalysis (IMASC), an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences under Award # DE-SC0012573.
Synthesis and Characterization of Core-Shell Cu-Ru, Cu-Rh, and Cu-Ir Nanoparticles
Optimizing the use of expensive precious metals is critical to developing sustainable and low-cost processes for heterogeneous catalysis or electrochemistry. Here, we report a synthesis method that yields core-shell Cu-Ru, Cu-Rh, and Cu-Ir nanoparticles with the platinum-group metals segregated on the surface. The synthesis of Cu-Ru, Cu-Rh, and Cu-Ir particles allows maximization of the surface area of these metals and improves catalytic performance. Furthermore, the Cu core can be selectively etched to obtain nanoshells of the platinum-group metal components, leading to a further increase in the active surface area. Characterization of the samples was performed with X-ray absorption spectroscopy, X-ray powder diffraction, and ex situ and in situ transmission electron microscopy. CO oxidation was used as a reference reaction: the three core-shell particles and derivatives exhibited promising catalyst performance and stability after redox cycling. Furthermore, these results suggest that this synthesis approach may optimize the use of platinum-group metals in catalytic applications.
Replication Data for: Comment on "STM study of the (111) and (100) surfaces of PdAg, Surf. Sci. 417 (1998) 292-300" and references therein
The data underlying this published work have been made publicly available in this repository as part of the IMASC Data Management Plan. This work was supported as part of the Integrated Mesoscale Architectures for Sustainable Catalysis (IMASC), an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences under Award # DE-SC0012573.
Replication Data for: Regeneration of Active Surface Alloys during Cyclic Oxidation and Reduction: Oxidation of H 2 on Pd/Ag(111)
The data underlying this published work have been made publicly available in this repository as part of the IMASC Data Management Plan. This work was supported as part of the Integrated Mesoscale Architectures for Sustainable Catalysis (IMASC), an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences under Award # DE-SC0012573.
Dilute Alloys Based on Au, Ag, or Cu for Efficient Catalysis: From Synthesis to Active Sites
The development of new catalyst materials for energy-efficient chemical synthesis is critical as over 80% of industrial processes rely on catalysts, with many of the most energy-intensive processes specifically using heterogeneous catalysis. Catalytic performance is a complex interplay of phenomena involving temperature, pressure, gas composition, surface composition and structure over multiple length and time scales. In response to this complexity, the integrated approach to heterogeneous dilute-alloy catalysis reviewed here brings together materials synthesis, mechanistic surface chemistry, reaction kinetics, in-situ and operando characterization, and theoretical calculations in a coordinated effort to develop design principles to predict and improve catalytic selectivity. Dilute alloy catalysts—in which isolated atoms or small ensembles of the minority metal on the host metal lead to enhanced reactivity while retaining selectivity—are particularly promising as selective catalysts. Several dilute alloy materials using Au, Ag and Cu as the majority host element, including more recently introduced support-free nanoporous metals and oxide-supported nanoparticle "raspberry colloid templated (RCT)" materials, are reviewed for selective oxidation and hydrogenation reactions. Progress in understanding how such dilute alloy catalysts can be used to enhance selectivity of key synthetic reactions is reviewed, including quantitative scaling from model studies to catalytic conditions. The dynamic evolution of catalyst structure and composition studied in surface science and catalytic conditions and their relationship to catalytic function are also discussed, followed by advanced characterization and theoretical modeling that have been developed to determine the distribution of minority metal atoms at or near the surface. Furthermore, the integrated approach demonstrates the success of bridging the divide between fundamental knowledge and design of catalytic processes in complex catalytic systems, which can accelerate the development of new and efficient catalytic processes.
Comment on “STM study of the (111) and (100) surfaces of PdAg, Surf. Sci. 417 (1998) 292–300" and references therein
Investigation of isolated, single atoms on the surfaces of alloys is of great interest in the field of heterogeneous catalysis. Prior studies by Nieuwenhuys, etal. [Surf. Sci. 417 (1998) 292–300 and references therein] showed that annealing the (111) surface of a PdAg bulk alloy yielded a surface with ~5% Pd, predominantly in the form of single atoms, rendering it an ideal model for investigating the reactivity of single Pd atoms. Herein, new evidence is reported that establishes the bulk composition of the PdAg(111) alloy studied previously is 67 % Ag and 33 % Pd, whereas it was reported to be 33 % Ag and 67 % Pd in the prior studies. Furthermore, the bulk composition of a crystal derived from the same PdAg alloy boule used previously was determined using energy-dispersive X-ray spectroscopy (EDS)—a bulk sensitive technique. Surface-sensitive measurements, including X-ray photoelectron spectroscopy, were also performed and are in good agreement with the prior studies by Nieuwenhuys, etal.
Toward benchmarking theoretical computations of elementary rate constants on catalytic surfaces: formate decomposition on Au and Cu
The underlying factors that result in the high pre-exponential factors for formate decomposition on Au and Cu(110) surfaces and the origins of differences between experiment and theory that may arise are reported.
Replication Data for: Hydrogen migration at restructuring palladium-silver oxide boundaries dramatically enhances reduction rate of silver oxide
The data underlying this published work have been made publicly available in this repository as part of the IMASC Data Management Plan. This work was supported as part of the Integrated Mesoscale Architectures for Sustainable Catalysis (IMASC), an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences under Award # DE-SC0012573.
Replication Data for: Dilute Pd-in-Au alloy RCT-SiO2 catalysts for enhanced oxidative methanol coupling
The data underlying this published work have been made publicly available in this repository as part of the IMASC Data Management Plan. This work was supported as part of the Integrated Mesoscale Architectures for Sustainable Catalysis (IMASC), an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences under Award # DE-SC0012573.