Enhanced Benzene Adsorption in Chloro-Functionalized Metal–Organic Frameworks
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Engineering topics
Frogley, Mark D.
Publications and source records attributed to Frogley, Mark D..
Highly Efficient Proton Conduction in the Metal–Organic Framework Material MFM-300(Cr)·SO 4 (H 3 O) 2
The development of materials showing rapid proton conduction with a low activation energy and stable performance over a wide temperature range is an important and challenging line of research. Here, we report confinement of sulfuric acid within porous MFM-300(Cr) to give MFM-300(Cr)·SO 4 (H 3 O) 2 , which exhibits a record-low activation energy of 0.04 eV, resulting in stable proton conductivity between 25 and 80 °C of >10 –2 S cm –1 . In situ synchrotron X-ray powder diffraction (SXPD), neutron powder diffraction (NPD), quasielastic neutron scattering (QENS), and molecular dynamics (MD) simulation reveal the pathways of proton transport and the molecular mechanism of proton diffusion within the pores. Confined sulfuric acid species together with adsorbed water molecules play a critical role in promoting the proton transfer through this robust network to afford a material in which proton conductivity is almost temperature-independent.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Structural and Dynamic Analysis of Sulphur Dioxide Adsorption in a Series of Zirconium-Based Metal–Organic Frameworks
We report reversible high capacity adsorption of SO 2 in robust Zr-based metal–organic framework (MOF) materials. Zr-bptc (H 4 bptc=biphenyl-3,3',5,5'-tetracarboxylic acid) shows a high SO 2 uptake of 6.2 mmol g -1 at 0.1 bar and 298 K, reflecting excellent capture capability and removal of SO 2 at low concentration (2500 ppm). Dynamic breakthrough experiments confirm that the introduction of amine, atomically-dispersed Cu II or heteroatomic sulphur sites into the pores enhance the capture of SO 2 at low concentrations. The captured SO 2 can be converted quantitatively to a pharmaceutical intermediate, aryl N-aminosulfonamide, thus converting waste to chemical values. In situ X-ray diffraction, infrared micro-spectroscopy and inelastic neutron scattering enable the visualisation of the binding domains of adsorbed SO 2 molecules and host–guest binding dynamics in these materials at the atomic level. Refinement of the pore environment plays a critical role in designing efficient sorbent materials.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Direct Observation of Ammonia Storage in UiO-66 Incorporating Cu(II) Binding Sites
The presence of active sites in metal–organic framework (MOF) materials can control and affect their performance significantly in adsorption and catalysis. However, revealing the interactions between the substrate and active sites in MOFs at atomic precision remains a challenging task. Here, we report the direct observation of binding of NH 3 in a series of UiO-66 materials containing atomically dispersed defects and open Cu(I) and Cu(II) sites. While all MOFs in this series exhibit similar surface areas (1111–1135 m 2 g –1 ), decoration of the -OH site in UiO-66-defect with Cu(II) results in a 43% enhancement of the isothermal uptake of NH 3 at 273 K and 1.0 bar from 11.8 in UiO-66-defect to 16.9 mmol g –1 in UiO-66-Cu II . A 100% enhancement of dynamic adsorption of NH 3 at a concentration level of 630 ppm from 2.07 mmol g –1 in UiO-66-defect to 4.15 mmol g –1 in UiO-66-Cu II at 298 K is observed. In situ neutron powder diffraction, inelastic neutron scattering, and electron paramagnetic resonance, solid-state nuclear magnetic resonance, and infrared spectroscopies, coupled with modeling reveal that the enhanced NH 3 uptake in UiO-66-Cu II originates from a {Cu(II)···NH 3 } interaction, with a reversible change in geometry at Cu(II) from near-linear to trigonal coordination. This work represents the first example of structural elucidation of NH 3 binding in MOFs containing open metal sites and will inform the design of new efficient MOF sorbents by targeted control of active sites for NH 3 capture and storage.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
High capacity ammonia adsorption in a robust metal–organic framework mediated by reversible host–guest interactions
To understand the exceptional adsorption of ammonia (NH 3 ) in MFM-300(Sc) (19.5 mmol g -1 at 273 K and 1 bar without hysteresis), we report a systematic investigation of the mechanism of adsorption by a combination of in situ neutron powder diffraction, inelastic neutron scattering, synchrotron infrared microspectroscopy, and solid-state 45 Sc NMR spectroscopy. These complementary techniques reveal the formation of reversible host–guest supramolecular interactions, which explains directly the observed excellent reversibility of this material over 90 adsorption–desorption cycles.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
A {Ni 12 }-Wheel-Based Metal-Organic Framework for Coordinative Binding of Sulphur Dioxide and Nitrogen Dioxide
Air pollution by SO 2 and NO 2 has caused significant risks on the environment and human health. Understanding the mechanism of active sites within capture materials is of fundamental importance to the development of new clean-up technologies. We report the crystallographic observation of reversible coordinative binding of SO 2 and NO 2 on open Ni II sites in a metal-organic framework (NKU-100) incorporating unprecedented {Ni 12 }-wheels; each wheel exhibits six open Ni II sites on desolvation. Immobilised gas molecules are further stabilised by cooperative host-guest interactions comprised of hydrogen bonds, π∙∙∙π interactions and dipole interactions. At 298 K and 1.0 bar, NKU-100 shows adsorption uptakes of 6.21 and 5.80 mmol g -1 for SO 2 and NO 2 , respectively. Dynamic breakthrough experiments have confirmed the selective retention of SO 2 and NO 2 at low concentrations under dry conditions. This work will inspire the future design of efficient sorbents for the capture of SO 2 and NO 2 .
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
High Ammonia Adsorption in MFM-300 Materials: Dynamics and Charge Transfer in Host–Guest Binding
Ammonia (NH 3 ) is a promising energy resource owing to its high hydrogen density. However, its widespread application is restricted by the lack of efficient and corrosion-resistant storage materials. In this work, we report high NH 3 adsorption in a series of robust metal-organic framework (MOF) materials, MFM-300(M) (M = Fe, V, Cr, In). MFM-300(M) (M = Fe, V III , Cr) show fully reversible capacity for >20 cycles, reaching capacities of 16.1, 15.6, and 14.0 mmol g -1 , respectively, at 273 K and 1 bar. Under the same conditions, MFM-300(V IV ) exhibits the highest uptake among this series of MOFs of 17.3 mmol g -1 . In situ neutron powder diffraction, single-crystal X-ray diffraction, and electron paramagnetic resonance spectroscopy confirm that the redox-active V center enables host-guest charge transfer, with V IV being reduced to V III and NH 3 being oxidized to hydrazine (N 2 H 4 ). A combination of in situ inelastic neutron scattering and DFT modeling has revealed the binding dynamics of adsorbed NH 3 within these MOFs to afford a comprehensive insight into the application of MOF materials to the adsorption and conversion of NH 3 .
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Guest-Controlled Incommensurate Modulation in a Meta-Rigid Metal–Organic Framework Material
Structural transitions of host systems in response to guest binding dominate many chemical processes. We report an unprecedented type of structural flexibility within a meta-rigid material, MFM-520, which exhibits a reversible periodic-to-aperiodic structural transition resulting from a drastic distortion of a [ZnO 4 N] node controlled by the specific host–guest interactions. The aperiodic crystal structure of MFM-520 has no three-dimensional (3D) lattice periodicity but shows translational symmetry in higher-dimensional (3 + 2)D space. In this work, we have directly visualized the aperiodic state which is induced by incommensurate modulation of the periodic framework of MFM-520·H 2 O upon dehydration to give MFM-520. Filling MFM-520 with CO 2 and SO 2 reveals that, while CO 2 has a minimal structural influence, SO 2 can further modulate the structure incommensurately. MFM-520 shows exceptional selectivity for SO 2 under flue-gas desulfurization conditions, and the facile release of captured SO 2 from MFM-520 enabled the conversion to valuable sulfonamide products. MFM-520 can thus be used as a highly efficient capture and delivery system for SO 2 .
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗