Engineering topics

Fu, Jinzhao [Worcester Polytechnic Institute, MA (United States)]

Publications and source records attributed to Fu, Jinzhao [Worcester Polytechnic Institute, MA (United States)].

5 records

DOE OSTI2026

Toward Sustainable Lithium Recovery: A Universal Hydrothermal Approach for Lithium Extraction

The rapid growth of lithium-ion battery (LIB) deployment presents critical challenges in sustainable end-of-life management and raw material recovery. Conventional pyrometallurgical and hydrometallurgical methods suffer from high energy demand, lithium loss, and complex wastewater treatment. This study established a universal, highly efficient, and sustainable hydrothermal route for lithium extraction and material recovery from various spent lithium-ion battery cathodes using 1,2,4,5-benzenetetracarboxylic acid (BTCA). The optimized process achieved over 99% lithium leaching efficiency for lithium iron phosphate (LFP) and LiNi x Mn y Co 1–x–y O 2 (NMC), with transition metal coleaching below 1%. It was also broadly applicable to lithium manganese oxide, lithium cobalt oxide, and black mass, achieving 98.5%, 98.95%, and 94.06% leaching efficiencies, respectively. The extracted lithium was directly converted into battery-grade lithium sources, while transition metals were recovered as oxides. Unreacted BTCA was efficiently regenerated and reused without degradation. Electrochemical evaluation confirmed that cathode materials synthesized with recovered lithium exhibit comparable performance to commercial products. Compared to conventional hydrometallurgy, the BTCA-based process increased revenue by over 40% and reduced greenhouse gas emissions by up to 39%. This closed-loop, chemistry-agnostic strategy offered a scalable and economically viable solution for industrial LIB recycling, enabling resource circularity and reducing dependency on primary critical materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Hybrid Doping Strategy with High‐Entropy Cu/Fe Surface Modification and Zr Bulk Incorporation for Ni‐Rich Cathodes

A hybrid doping strategy combining Zr 4+ bulk doping with high-entropy Cu 2+ /Fe 3+ surface doping is developed to enhance the structural and interfacial stability of Ni-rich layered oxide cathodes. Cu and Fe are selectively introduced at the particle surface via a surface-selective ion-exchange process, forming a ≈15 nm Fe-rich layer while preserving the layered framework. Compared to the pristine cathode, the hybrid sample exhibits significantly improved electrochemical performance in both half-cell and full-cell configurations. In half-cells, the hybrid retains 88.5% and 90.2% after 100 cycles at 1C under 4.6 and 4.5 V, respectively. During high-voltage full-cell cycling, the hybrid cathode maintains over 80% capacity retention, whereas the pristine counterpart retains less than 10% under identical conditions over the same cycling period. XPS, EELS, and DEMS analyses confirm improved oxygen retention, suppressed gas evolution, and stable surface chemistry, while DFT calculations indicate enhanced Me–O bonding in the selected Fe 0.75 Cu 0.25 (Mn 1/16 Co 2/16 Ni 13/16 )O 2 surface composition, which is identified through DFT-calculated mixing energy reaching a minimum at this ratio, indicating the most thermodynamically favorable configuration. In conclusion, these results demonstrate the effectiveness of this hybrid doping strategy in mitigating coupled degradation pathways in Ni-rich cathodes.

15 GEOTHERMAL ENERGY↗

DOE OSTI2025

Selectively extracting lithium from single and mixed cathode materials

With the burgeoning reliance on lithium-ion batteries for sustainable energy solutions and electric transportation, the environmental and resource management associated with battery disposal are increasingly critical. Addressing these challenges necessitates innovative recycling techniques that recover valuable battery components, particularly lithium. This research introduces a universal, eco-friendly approach tailored for the efficient selective extraction of lithium from both single and mixed cathode materials, achieving impressive selective leaching efficiencies of lithium (99.51 % for LFP, 90 % for NMC, and 97.24 % for mixed cathode). Surprisingly, leaching efficiency of lithium from NMC can be significantly improved by introducing LFP since LFP can remove the dense transition-metal salts on the surface of NMC. The extracted lithium is recovered as lithium carbonate with battery-grade purity. This study also highlights the reuse of formic acid and the adoption of oxygen as an oxidizing agent to prevent wastewater production. Therefore, this method provides a robust foundation for sustainable lithium battery recycling.

economically and environmentally feasible↗

DOE OSTI2025

Impacts of Lanthanum Impurities on Nickel-Rich Cathode Materials

The widespread use of lithium-ion batteries (LIBs) has led to environmental concerns and exacerbated the scarcity of essential minerals, underscoring the urgent need for effective recycling strategies. Among various recycling methods, the hydrometallurgical process is distinguished by its energy efficiency and minimal environmental impact. Nickel-metal hydride (Ni-MH) batteries are a significant source of nickel sulfate (NiSO 4 ) for hydrometallurgical recycling due to their substantial nickel content. A significant challenge arises from the effective separation of lanthanum (La), which results in at least 20 ppm of La being present in the recycled NiSO 4 . This study explores a critical aspect of the recycling process: the impact of La 3+ impurities, introduced through recycled NiSO 4 , on the performance of the synthesized nickel-rich cathode materials. We conducted a thorough investigation into how La 3+ influences morphology and structural integrity during both the synthesis of precursors and the production of cathode materials. Our findings indicate that La 3+ impurities do not adversely affect the morphology or structural integrity of the cathode precursors relative to virgin materials. However, higher concentrations of La 3+ reduce the discharge capacity with enhanced cycle stability by minimizing cation mixing between lithium (Li + ) and nickel (Ni 2+ ) ions within the cathode. Furthermore, this stability is crucial for extending battery life. Therefore, controlling the concentration of La 3+ impurities is essential for optimizing the electrochemical performance of recycled cathode materials.

Corrosion↗

DOE OSTI2025

Ultra-high efficient lithium recovery via terephthalic acid from spent lithium-ion batteries

The recovery of lithium from spent lithium-ion batteries (LIBs) is a critical step in advancing sustainability within the battery industry. Traditional lithium extraction methods from end-of-life LIBs predominantly rely on chemical leaching techniques. However, these methods often involve the excessive use of acids, leading to substantial environmental concerns. Additionally, their non-selective nature can compromise the purity of the recovered lithium salt. To achieve battery-grade purity, further purification and recovery processes are necessary. In this study, we introduce a universal and eco-friendly process for lithium recovery, employing terephthalic acid to selectively extract lithium prior to the recycling of other valuable metals. This innovative method achieves lithium recovery rates exceeding 98.53% from layered oxide cathodes and 98.53% from lithium iron phosphate cathodes, delivering an exceptional purity level of 99.95%. By demonstrating applicability across a variety of cathode materials, this approach establishes a universal, sustainable and efficient solution for LIB recycling. The high-purity lithium extraction enabled by this process supports the comprehensive utilization of valuable resources, contributing significantly to the development of a circular economy for battery materials.

Hou, Jiahui [Worcester Polytechnic Institute, MA (↗